944,104 Members | Top Members by Rank

Ad:
Aug 4th, 2006
0

I have a HP LC2000 that has message: istat=0a: LSS_PAR on ha=1 sist0=41

Expand Post »
I have a HP Netserver 2000 running SCO UNIX 5.0.6. I get the message: istat=0a: LSS_PAR on ha=1 sist0=41 sist1=00 !!!! dstat =81 on ha=1 has DS_OPC while WAIT DISCONNECT, rp=c014f8co dsp=FD on path=1, newdsp=FD064600 WARNING: Parity Error MSG OUT=00000006 Failed, 1code=80000002 on ha=1 id warning:”RESERVE” command timed out 1201 seconds after start on ha aborting command on ha=1 id=2 lun=0 tag=00 cpu2:istat=0a: LSSn ha=1 sist0=41 sist1=00!!!! cpu2:dstat=81 on ha=1 has DS_OPC while at WAIT DISCONNECT, rp=c014f8co cpu2:on path=1, new dsp=fd064600 I have changed motherboard, tape drive, (2) processors, SCSI controller for tape drive, tape drive software, and memory. The only thing I have not changed is the hard drives. The system freezes up and does not back up. System runs fine during the day. The log time is around 7PM when this error occurs. Does this every 2-3 days. A reboot takes care of the lockup. The above message is on the console. I have Googled parts of the error message and seems to be pointing to a system BIOS and SCSI Symbios problem. Does anyone have any suggestions?
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
dmksh is offline Offline
2 posts
since Aug 2006
Aug 5th, 2006
0

Re: I have a HP LC2000 that has message: istat=0a: LSS_PAR on ha=1 sist0=41

Hi dmksh, I think you have posted this in the wrong forum mate, this is for DaniWeb related stuff only. Sounds like you need to find the most appropriate sub-forum in the Linux and Unix section of Tech Talk.
Administrator
Staff Writer
Reputation Points: 1418
Solved Threads: 37
Freelance Word Punk
happygeek is offline Offline
5,570 posts
since Mar 2006

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in DaniWeb Community Feedback Forum Timeline: rep power
Next Thread in DaniWeb Community Feedback Forum Timeline: Danni is very slow? You guys rekon?





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC