943,680 Members | Top Members by Rank

Ad:
Apr 20th, 2004
0

Ethical Dilemma: Malpractice in the workplace - What would you do?

Expand Post »
I just want your opinion on a situation/case study I been given for an assignment at university. I would like to use your opinions to make a critical summary and get opinion from computer professionals.

The situation i've been given is that a X works as a project manager and is working on medical equipment at the moment. X and his team have tested the equipment and found serious faults that can cause fatal consequences however regardless of this, company still wishes to go ahead and release the equipment. X has expressed his concerns about this to superiors.

I would like you opinions if you were in such a position - would you try and prevent equipment this from being released and if not and a fatal consequence did occur would you accept reliability. and also would you inform a third party of the malpractice outside the company your employed by in such a serious case? I have looked at the consequences all of this and acts and professional bodies that X may violate (like ACM) but would like to know what the majority of people would do so that I can draw up a conclusion.
Reputation Points: 11
Solved Threads: 0
Newbie Poster
dina is offline Offline
12 posts
since Nov 2003
Apr 20th, 2004
0

Re: Ethical Dilemma: Malpractice in the workplace - What would you do?

The faults are serious. Yes, I would prevent the equipment from being released and contact a third party about the situation.
Reputation Points: 115
Solved Threads: 7
Practically a Master Poster
Slade is offline Offline
633 posts
since Mar 2004
Apr 21st, 2004
0

Re: Ethical Dilemma: Malpractice in the workplace - What would you do?

Thank you for your reply. I've found that many of you are viewing this thread it would be really great if you could all share your opinions...... also if you think it is ok to do something unethical to achieve a good outcome? eg X does something unethical like violates company data protection act and company & ACM codes of conduct to stop the equipments release.
Reputation Points: 11
Solved Threads: 0
Newbie Poster
dina is offline Offline
12 posts
since Nov 2003
Apr 21st, 2004
0

Re: Ethical Dilemma: Malpractice in the workplace - What would you do?

Well yes, I would do that. Pretty much I would go to any lengths to stop the release of that equipment, worry about my courier later.
Reputation Points: 115
Solved Threads: 7
Practically a Master Poster
Slade is offline Offline
633 posts
since Mar 2004
Apr 21st, 2004
0

Re: Ethical Dilemma: Malpractice in the workplace - What would you do?

Hello Dina,

Your situation and answers will vary largly on if the person in question has a conscience. I also think that the legal people are dangerously close to opening a pandora's box concerning confidentiality agreements.

I know that medical lawsuits are not only naming the hospitals, but the individual doctors and nurses as defendants for a particular case.

I am a firm believer in disclosure of dangerous elements. If I was in such a position, I would consult with supervisors, and if not satisfied, I would contact a lawyer and make sure I was not held personally liable.

A number of companies are also providing employees with a "anonymous" line to tip off malpractice at the company. I would make a report there, and then document it on paper, again providing evidence that I tried to prevent a disaster, and was working for the best interests of both the community, and the corporation.

I wonder if legal opinions would show that confidentiality agreements remove personal liability from the individuals... "Your Honor, I could not prevent the sale of this item because if I would have told the regulatory commission about the defect, I would have violated a confidentiality agreement that I signed. I could not expose my family to damages."

Let us know what you find out.

Christian
Team Colleague
Reputation Points: 121
Solved Threads: 57
Posting Virtuoso
kc0arf is offline Offline
1,629 posts
since Mar 2004
Jun 18th, 2004
0

Re: Ethical Dilemma: Malpractice in the workplace - What would you do?

Just to chime in here if it is not too late....

On the surface it seems simple. Ya, stop that puppy from being released into the world with your name attached because it will kill people.

But, wait, what do you mean by "serious faults"? 1 in 10 are killed? 1 in 100? everyone?

So, say we built a machine to remove brain tumors from people but it killed 1 in 10. How many would die if the machine didn't operate at all? 1 in 3?

Polio vaccines have saved tens of millions from contracting polio, yet about a dozen people a year get Polio from the vaccine. Release it? you bet!

On the other hand, say you work for a tobaco company. Your product that you worked on will kill millions of people, but not for 40+ years.

You work for Firestone and release tires that occasionally explode causing Ford SUV's to roll over. Do you stop them?

You work for Smith and Wesson. Do you send a memo to your boss saying "Hey, this could kill someone!" Probably not.

You work for Microsoft. You release a version 1 of a product with several hundred bugs. Yet, the product makes a ton-o-money for the company. You will fix many of the bugs in version 2. Someone may use your product for a mission-critical application. Do you stop the release?


So, your question is a tough one to give a reply to. I'd like to think that I would not be associated with anything that kills people. Unless I worked for a defense contractor (which I do not). However, I do work on wireless devices, and who knows what we'll discover about them in 10 years?
Reputation Points: 36
Solved Threads: 11
Posting Pro in Training
Chainsaw is offline Offline
436 posts
since Jun 2004
Jun 21st, 2004
0

Re: Ethical Dilemma: Malpractice in the workplace - What would you do?

Reputation Points: 21
Solved Threads: 1
Posting Whiz in Training
szukalski is offline Offline
295 posts
since Jun 2004

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in IT Professionals' Lounge Forum Timeline: Am I going about this the wrong way
Next Thread in IT Professionals' Lounge Forum Timeline: MS Small Business Server: Does anyone know about security vulnerabilities?





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC