 |  |  |  |  |  |  |  |
Computer repeatedly crashing
 |
•
•
Join Date: Jan 2004
Posts: 86
Reputation: 
Solved Threads: 0
Junior Poster in Training
•
•
•
•
Originally Posted by caperjack
You can change the amount of ram used by the video in the BIOS/Setup of the computer ,by entering the bios when you boot the computer .and making the desired change to the video section of the bios .
•
•
Join Date: Jan 2004
Posts: 86
Reputation:
Solved Threads: 0
Junior Poster in Training
•
•
•
•
Originally Posted by Spector
Please go to this site http://www.mypccenter.com - run a full scan and post the report link here - it will show all hardware/software information and will help finding the reason for your problem.
Turns out my video card is Onboard.
•
•
Join Date: Aug 2003
Posts: 10,263
Reputation: 
Solved Threads: 558
•
•
•
•
Originally Posted by bbb2k4life
ok I know how to get the BIOS screen and all that but will changing the amount of RAM the video card uses cause any type of problems or for it's performance to degrade?
Last edited by caperjack; Jul 28th, 2006 at 7:20 am.
Is your computer is ready for Win7, xp mode.
http://www.microsoft.com/windows/vir.../download.aspx
Going with the Flow ,but the water is low and the rocks are Hard
http://www.microsoft.com/windows/vir.../download.aspx
Going with the Flow ,but the water is low and the rocks are Hard
•
•
Join Date: Jan 2004
Posts: 86
Reputation:
Solved Threads: 0
Junior Poster in Training
•
•
•
•
Originally Posted by caperjack
Yes ,the more ram the better you video will be .You should buy another 512 stick of ram and have it installed
•
•
Join Date: Aug 2003
Posts: 10,263
Reputation:
Solved Threads: 558
•
•
•
•
Originally Posted by bbb2k4life
ok well i was able to order some restore disks for my other computer. is it possible to switch the RAM out of that computer into the one I'm using now??
Is your computer is ready for Win7, xp mode.
http://www.microsoft.com/windows/vir.../download.aspx
Going with the Flow ,but the water is low and the rocks are Hard
http://www.microsoft.com/windows/vir.../download.aspx
Going with the Flow ,but the water is low and the rocks are Hard
•
•
Join Date: Jan 2004
Posts: 86
Reputation:
Solved Threads: 0
Junior Poster in Training
•
•
•
•
Originally Posted by caperjack
only if its the same type ,and i have know idea if they are the same ,as there are many different types ,and im not talking about brand name .
just to put a cat among the pidgeons i did a bit of research on that error message. from what i can see it seems to be something that was recently installed/uninstalled. have you put in new software recently and what microsoft updates have you added. .net 2.0can definitely balls things up.
check your event logs as far back as you can and see what was put in just before it started to go wobbly. you said your browsers were ok you can check your update history through microsoft update at the top of your all programs menu. and roll back by uninstalling those in your add/remove programs menu one by one, followed by any driver updates by going to device manager and "roll back driver" on any that were updated. you could also go back to a restore point at least a month before all problems started. if neither of those work then i would think of virus/spyware infection.
it is possibly a hardware problem but it sounds more like software to me but goldeneagle2005 gave you an accurate way to diagnose any faulty component. if it turns out to be hardware i'd suspect ram first. remove each stick in turn. if it stops crashing the bad stick is out.... Just looked above got there a bit late....didn't I
check your event logs as far back as you can and see what was put in just before it started to go wobbly. you said your browsers were ok you can check your update history through microsoft update at the top of your all programs menu. and roll back by uninstalling those in your add/remove programs menu one by one, followed by any driver updates by going to device manager and "roll back driver" on any that were updated. you could also go back to a restore point at least a month before all problems started. if neither of those work then i would think of virus/spyware infection.
it is possibly a hardware problem but it sounds more like software to me but goldeneagle2005 gave you an accurate way to diagnose any faulty component. if it turns out to be hardware i'd suspect ram first. remove each stick in turn. if it stops crashing the bad stick is out.... Just looked above got there a bit late....didn't I
Last edited by JemB; Aug 3rd, 2006 at 1:44 pm.
|
Similar Threads
- computer keeps randomly crashing [not crc worm] (Windows NT / 2000 / XP)
Other Threads in the Windows NT / 2000 / XP Forum
- Previous Thread: Logging on through Terminal Services
- Next Thread: cpu time usage problems..im out of ideas
Views: 6754 | Replies: 36
| Thread Tools | Search this Thread |
Latest Windows NT / 2000 / XP Posts
- Today's Posts
- Unanswered Threads
Related Forum Features
Tag cloud for Windows NT / 2000 / XP
.net 3.5 2010 activedirectory address apache application appstore audio automatically avast batch black blue bluescreen boot bsod computer crash death desktop display drive error errors explorer failure firefox flash folder fontmanagers framework freeze home install internet ip laptop lcd live load logitech memory microsoft mobile monitor motionle1600 network open options os outlook outlook-express partition patch port problem processor program proxy reformat registry remote repair restore rootkit screen scrolling security serious server. sharepoint shutdown_-a simplifiedchinese sp1 sp3 startup suggestion temp uninstall unreadable update upgrade usb user variables videodrivers virtual virus vista visual vulnerability wab webos win win32/heur windows windows7 windowsxp xp
