ACER 2300, fan working but won't power up

Reply

Join Date: Mar 2007
Posts: 1
Reputation: printerguy is an unknown quantity at this point 
Solved Threads: 0
printerguy printerguy is offline Offline
Newbie Poster

ACER 2300, fan working but won't power up

 
0
  #1
Mar 20th, 2007
Acer 2300, when started this a.m. won't power up. Fan running, heat coming out but no sounds or anything else. Won't boot up with system disk either. Any ideas? Shut down fine last night. I removed the battery for about 5 min. replaced, held down the start button still nothing. The power light does show on in the front.
Reply With Quote Quick reply to this message  
Join Date: Jan 2007
Posts: 479
Reputation: mechbas is an unknown quantity at this point 
Solved Threads: 21
mechbas's Avatar
mechbas mechbas is offline Offline
Posting Pro in Training

Re: ACER 2300, fan working but won't power up

 
0
  #2
Mar 22nd, 2007
Have you tried another PSU?
Reply With Quote Quick reply to this message  
Join Date: Mar 2007
Posts: 12
Reputation: The Fixer is an unknown quantity at this point 
Solved Threads: 0
The Fixer's Avatar
The Fixer The Fixer is offline Offline
Newbie Poster

Re: ACER 2300, fan working but won't power up

 
0
  #3
Mar 23rd, 2007
Try disconnecting everything (HD, CD, Zip, floppy drive etc) from the MB leave the video card. You will need to use a PS2 mouse and keyboard as you cannot use USB items until you modify the BIOS and I have had problems with the USB adapters. Clear the BOIS per mfg method the unit should POST without the removed items then try to enter BIOS setup program.

If that doesn’t work I would swap a known good PSU (as noted above post) to rule out power supply problems. If this gets you somewhere you can start adding things back until your up and running.

See Catweazle's post the about dead machines

Good luck

The Fixer
Last edited by The Fixer; Mar 23rd, 2007 at 1:06 am. Reason: additional thoughts
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Troubleshooting Dead Machines Forum


Views: 2193 | Replies: 2
Thread Tools Search this Thread



Tag cloud for Troubleshooting Dead Machines
About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC