| | |
Vista freezing every few minutes...
![]() |
•
•
Join Date: Nov 2007
Posts: 2
Reputation:
Solved Threads: 0
•
•
•
•
I did this and my computer works fine now!
Good news, it looks like the problem is solved !!!
Indeed, after reporting the problem to Dell Europe, I was called by a technician who told me that a solution had been found and how to fix the problem. He kindly assisted me on the phone during the whole process.
(This fix applies to a Dell Dimension 9200 with two hard disks in RAID 0 on SATA ports 0 & 1 and two CD drives on SATA ports 2 & 3)
What I had to do was move the CD drives from SATA ports 2 and 3 to ports 4 and 5. If you open your computer, you will see two orange cables coming from the CD drives to connectors on the motherboard. Two other free connectors are located underneath. You just have to disconnect both cables and connect them into the lower set of connectors.
After this is done, when you restart the computer, you have to go to the setup (F2 at startup) and change the status of the SATA ports 2, 3, 4 and 5:
Drives
SATA-2 set to OFF
SATA-3 set to OFF
SATA-4 set to ON
SATA-5 set to ON
You can then save and leave the setup. After you restart, the computer runs smoothly.
I did this about an hour ago and didn't experience any freeze yet. I guess the "30 second freeze syndrome" is history now.
Addendum: now it's 5 hours later and everything is still fine. Operation successful ! http://us.i1.yimg.com/us.yimg.com/i/...l/spc_eee1.gif
I decided to try this on my Dell DM061/E520.
Have now been running for over 2 1/2 hours without a freeze.
On my machine the 2 orange cables were on SATA 1 and 4.
I moved 4 to 5 and 1 to 4 to keep the drives in order.
Went into setup and reset the switches.
SATA 2 and 3 are not available to me, unless they are on the bottom of the motherboard.
This sure beats Dell's suggestion to reinstall Vista.
Check Event viewer for Errors with IAStorv to see if this may be relavent to you.
Make sure you shutdown and turn the power off. Push the power button for 10 seconds or so to drain reserve power before opening the case.
I have an eMachines T5234, and it's keep freezing like crazy.
I was looking for the "SATA ports," but I don't see them. All I see on my BIOS screen is "IDE Channel 0 [Master] (active), IDE Channel 0 [Slave], IDE Channel 2 (active), IDE Channel 3, IDE Channel 4, IDE Channel 5"
What do I need to do?
•
•
Join Date: Nov 2007
Posts: 2
Reputation:
Solved Threads: 0
Hmmm, nope...not overheating Mr Bennet..
However i did get a blue screen. Before i started checking all my hardware, crying, praying etc. I had a look at my drivers in device manager. It seems under other devices i had about 10 bluetooth peripheral devices. (i only have 2; logitech mouse and keyboard). I disabled these, rebooted and the OS has beed stable for atleast an hour now.
Where these all came from im not sure.
Whether it was disabling these or the vista update that arrived at around the same time that fixed the problem im not sure...
but that was my experience.
Thanks.
However i did get a blue screen. Before i started checking all my hardware, crying, praying etc. I had a look at my drivers in device manager. It seems under other devices i had about 10 bluetooth peripheral devices. (i only have 2; logitech mouse and keyboard). I disabled these, rebooted and the OS has beed stable for atleast an hour now.
Where these all came from im not sure.
Whether it was disabling these or the vista update that arrived at around the same time that fixed the problem im not sure...
but that was my experience.
Thanks.
•
•
Join Date: Jan 2009
Posts: 4
Reputation:
Solved Threads: 0
•
•
•
•
I need help as well!!!
I have an eMachines T5234, and it's keep freezing like crazy.
I was looking for the "SATA ports," but I don't see them. All I see on my BIOS screen is "IDE Channel 0 [Master] (active), IDE Channel 0 [Slave], IDE Channel 2 (active), IDE Channel 3, IDE Channel 4, IDE Channel 5"
What do I need to do?
![]() |
Similar Threads
- Freezing when exiting applications (Troubleshooting Dead Machines)
- Constant Freezing in Windows 98SE (Windows 95 / 98 / Me)
Other Threads in the Windows Vista and Windows 7 Forum
- Previous Thread: Disabling autmatic update & administrator privelege problems
- Next Thread: AVerTV USB2.0 (M026) driver for vista x64
Views: 49698 | Replies: 22
| Thread Tools | Search this Thread |
Tag cloud for Windows Vista and Windows 7
.net 7 10 32bit advertising android antitrust app apple azure ballmer beta billgates blackberry blog cellphone cloudcomputing code computer defender deployment desktop development directorycontents disk downloads drm economy error foss free freeze gartner google government hp inbox internet internetexplorer iphone licensing linq linux longhorn mac merger microsoft midori mobile mojave monopolies ms news operating operatingsystem operatingsystems opinion os osx patch patents pc pdc presentation recovery registry research russia safari security seinfeld server software sp1 sp3 space steveballmer survey system touchscreen ubuntu unix update upgrade usb virtual virtualization virtulization vista win7 windows windows7 windowsmobile windowsvista windowsxp windriver wpf xobni xp yahoo






