First, Shut the computer down and unplug it from the wall. Then remove the PC's cover. Next find a free bay (under or above the cd-rom inplace now) You can have two cd-roms depending on the machine and what other drives you curently have. Open the box the drive came in and take the drive insert it into the free bay after you remove the bay cover. New drives usually come with screws (4?) allign the drive with the screws holes in the case and insert the screws. Then connect your cables. Before this make sure the drive's jumpers are set to either master or slave. If you already have a cd-rom on a cable its probably a master thus you would set the dvd-rom to a slave drive. Same goes if your putting it on a cable with a hard drive. What operating system are you using? XP, 2000, 98, me, etc. If your using 2000 or XP they should probably find the driver for the dvd-rom themselves. You will also want to install the dvd-rom software to play dvds that comes with a new drive. Then put the cover back on the machine and boot it up and make sure the computer sees it and install your DVD software. A new drive should also include a set of instruction more detailed then this and will show you visualy how to install and connect the cables. Let me know how you make out.