Please support our Legacy and Other Languages advertiser: Programming Forums
 |
•
•
Join Date: Apr 2006
Posts: 9
Reputation: 
Rep Power: 0
Solved Threads: 0
Newbie Poster
I copied qbasic.exe and qbasic.hlp (no way to tell the version ?) from my Dos 6 Install floppy into a folder. Qbasic.exe executes ok either from within or outside the folder, but can't access its help file. I used the qbasic options 'help path' tab to enter the correct path but xp is using the wrong prog to open it with. The Qbasic.hlp file 'property' shows that xp is trying to use winhelp32 stub to open it but can't. Apparently a .hlp file needs a helper file to work?? What other file from xp or my Dos 6 floppy can I redirect the "property open with" field?? Or is there an alternate qb help file I can make work??
I want only a help file that xp can execute. Please no 'switch to vb' program suggestions.
Perhaps this post would be better understood in the xp or Basic forum??
I want only a help file that xp can execute. Please no 'switch to vb' program suggestions.
Perhaps this post would be better understood in the xp or Basic forum??
•
•
Join Date: Oct 2007
Location: Cherry Hill, NJ
Posts: 1,884
Reputation: 
Rep Power: 13
Solved Threads: 197
The file QBASIC.HLP is not a Windows Help file, so WinHelp cannot open it.
You need a program named HELP.COM. If you google olddos.exe you should find the Microsoft package that contains QBasic and other utilities, like Help.com.
Hope this helps (pun intended)
You need a program named HELP.COM. If you google olddos.exe you should find the Microsoft package that contains QBasic and other utilities, like Help.com.
Hope this helps (pun intended)
•
•
Join Date: Apr 2006
Posts: 9
Reputation:
Rep Power: 0
Solved Threads: 0
Newbie Poster
I copied the following files from the DOS 6 (a 32 bit OS) install floppy to XP folder q: help.com, help.exe, qbasic.hlp, qbasic.exe. I changed qbasic.hlp props to 'open with' help.com.
In a dos window:
Ran qbasic and changed the help file path to folder q.
If I run qbasic.exe, F1, the diag 'bad file mode' pops up.
If I run help.com - same thing.
Changed changed qbasic.hlp props to 'open with' help.exe. Same thing.
Does any one have this thing working in XP ??
In a dos window:
Ran qbasic and changed the help file path to folder q.
If I run qbasic.exe, F1, the diag 'bad file mode' pops up.
If I run help.com - same thing.
Changed changed qbasic.hlp props to 'open with' help.exe. Same thing.
Does any one have this thing working in XP ??
•
•
•
•
Originally Posted by Duoas 
The file QBASIC.HLP is not a Windows Help file, so WinHelp cannot open it.
You need a program named HELP.COM. If you google olddos.exe you should find the Microsoft package that contains QBasic and other utilities, like Help.com.
Hope this helps (pun intended)
•
•
Join Date: Oct 2007
Location: Cherry Hill, NJ
Posts: 1,884
Reputation:
Rep Power: 13
Solved Threads: 197
I'm running XP and QBasic and help work fine for me. I can't reproduce your problem. Sorry I can't help you further...
•
•
Join Date: Apr 2006
Posts: 9
Reputation:
Rep Power: 0
Solved Threads: 0
Newbie Poster
Do you know where/how you acquired the files ? There seem to be many versions - quick basic/qbasic/qb45 etc. What is your folder & file structure ? Are all/which qbasic files in same folder ? Did you enter/change file properties, paths, autoexec.nt, config.nt ? Do you run in CMD or Command Window or in "DOS BOX" (a 3rd party emulator) ?
I can run the same files OK in a Win98 partition but not in XP. Thank you for your time & attention.
I can run the same files OK in a Win98 partition but not in XP. Thank you for your time & attention.
•
•
•
•
Originally Posted by Duoas
I'm running XP and QBasic and help work fine for me. I can't reproduce your problem. Sorry I can't help you further...
•
•
Join Date: Oct 2007
Location: Cherry Hill, NJ
Posts: 1,884
Reputation:
Rep Power: 13
Solved Threads: 197
Hmm, I hadn't considered different versions. I'm using QBasic version 1.1, and everything is just piled in one folder on my G: drive. I run it from the default windows command prompt.
What version are you trying to work with?
What version are you trying to work with?
•
•
Join Date: Apr 2006
Posts: 9
Reputation:
Rep Power: 0
Solved Threads: 0
Newbie Poster
My Qbasic came from Dos 6 Install Disk. Qb.. version is not detectable in any way I have tried ?? The same version executed from a Win98se task runs qb.. help ok. It's an XP compatibility boffup. I will just boot to 98 to run qb..
MS has apparently adopted its default "buy our new version if you want your stuff to work in XP" policy of magnificent indifference. Maybe some OS historian will stumble upon a solution someday ?
Thanks for your curiousity & attitutude of help. It does help to balance the scales of decency.
Ed
MS has apparently adopted its default "buy our new version if you want your stuff to work in XP" policy of magnificent indifference. Maybe some OS historian will stumble upon a solution someday ?
Thanks for your curiousity & attitutude of help. It does help to balance the scales of decency.
Ed
•
•
•
•
Originally Posted by Duoas
Hmm, I hadn't considered different versions. I'm using QBasic version 1.1, and everything is just piled in one folder on my G: drive. I run it from the default windows command prompt.
What version are you trying to work with?
•
•
Join Date: Oct 2007
Location: Cherry Hill, NJ
Posts: 1,884
Reputation:
Rep Power: 13
Solved Threads: 197
If it is from any of the DOS 6.x series or Windows 9x then it is QBasic 1.1. However, the editor (EDIT.EXE) changed for Windows 9x. Since DOS 6 is a 16-bit OS and Win 9x is 32-bit, you might want to search the web for the later editor. I'm using the 2.0.026 version of EDIT.EXE, copyrighted by MS in 1995. It doesn't have the WordStar diamond, but takes all the WordStar keys just fine...
Good luck.
Good luck.
•
•
Join Date: Apr 2006
Posts: 9
Reputation:
Rep Power: 0
Solved Threads: 0
Newbie Poster
I think edit.exe (a text editor) is one of the relevant functions in the operation of the help file system none of which are text files. However you may have the hit the nail wrt 16 vs 32 bit file formats. I had forgot that dos6 was not 32bit. I will give it one more look wrt this but have seen other informed advice to fuggetaboutit.
According to MS and a couple of other links these are the only required files:
http://support.microsoft.com/default.aspx/kb/109508
I see that you are as stubborn about this stuff as I am. It's hard to accept defeat eh??
Cheers: Ed
According to MS and a couple of other links these are the only required files:
http://support.microsoft.com/default.aspx/kb/109508
I see that you are as stubborn about this stuff as I am. It's hard to accept defeat eh??
Cheers: Ed
•
•
•
•
Originally Posted by Duoas
If it is from any of the DOS 6.x series or Windows 9x then it is QBasic 1.1. However, the editor (EDIT.EXE) changed for Windows 9x. Since DOS 6 is a 16-bit OS and Win 9x is 32-bit, you might want to search the web for the later editor. I'm using the 2.0.026 version of EDIT.EXE, copyrighted by MS in 1995. It doesn't have the WordStar diamond, but takes all the WordStar keys just fine...
Good luck.
•
•
Join Date: Oct 2007
Location: Cherry Hill, NJ
Posts: 1,884
Reputation:
Rep Power: 13
Solved Threads: 197
Yeah. As far as I am concerned, the computer is there to serve me, not the other way around. 
The MS article you linked references only which files may be corrupted for the error to occur. QBasic has always used EDIT.COM or EDIT.EXE to do its editing. Version 1.1 is where the editor was rewritten.
Have you tried just going to the command prompt and typing
Let me know what happens.
The MS article you linked references only which files may be corrupted for the error to occur. QBasic has always used EDIT.COM or EDIT.EXE to do its editing. Version 1.1 is where the editor was rewritten.
Have you tried just going to the command prompt and typing
help qbasic.hlp? If that works, then it is definitely EDIT... If not, then it is definitely a corruption in one of the listed files...Let me know what happens.
|
Similar Threads
Other Threads in the Legacy and Other Languages Forum
- print to USB from Qbasic (Legacy and Other Languages)
- Code of File open dialogue box (Visual Basic 4 / 5 / 6)
- How a doc file can be open inside browser without prompting the download dialog box (ASP.NET)
- Where is my file open notification in excel 2000? (Windows Software)
- file open dialog box control in asp.net (ASP.NET)
- Printing problem with Qbasic (Legacy and Other Languages)
- file open code in VB (Visual Basic 4 / 5 / 6)
- QBasic opening notepad files (Legacy and Other Languages)
Other Threads in the Legacy and Other Languages Forum
- Previous Thread: Reverse Engineer OS9 File Format - Music Notation
- Next Thread: question in matlab
•
•
•
•
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Linear Mode
