I am going to try a board from ebay from this member ltmcomptec They have a bunch of them guaranteed for 30 days. They also have a newer version of this board than mine. Mine is version 1.2 they have version 1.2 and 2.0. Hopefully the 2.0 is not as prone to failure. I am sure if we wait long enough someone will come up with a way to repair these boards. I think it all has to do with the flex in the boards when the lid is opened and closed. If you have the unit open you can see a considerable flex when the unit is opened. If you can run your unit for now, try taking the screw out of the right hand side hinge. Seems to help with the stress on the board. Makes the system a little less unstable.