 |  |  |  |  |  |  |  |
Netgear router blocking Hotmail (again)
 |
Hi Guys,
I've recently started using a netgear DG834 router which is connected to my pc via the on-board ethernet port (NOT a NIC).
I can access most sites ok, including the hotmail login page, but after entering my details I get the 'page cannot be displayed' error.
After reading a couple of other threads on here...
I've tried reducing the MTU on the LAN (using Dr TCP) and also on the router, but this didn't help.
I've also upgraded to the latest firmware.
Still nothing. Netgear tech support didn't help much, they suggested setting up a firewall rule to allow port forwarding, but that didn't work either.
Just worndering if anyone here had any ideas...? They'd be much appreciated.
Oh yeah, specs... WinXP, IE 6.0
I've recently started using a netgear DG834 router which is connected to my pc via the on-board ethernet port (NOT a NIC).
I can access most sites ok, including the hotmail login page, but after entering my details I get the 'page cannot be displayed' error.
After reading a couple of other threads on here...
I've tried reducing the MTU on the LAN (using Dr TCP) and also on the router, but this didn't help.
I've also upgraded to the latest firmware.
Still nothing. Netgear tech support didn't help much, they suggested setting up a firewall rule to allow port forwarding, but that didn't work either.
Just worndering if anyone here had any ideas...? They'd be much appreciated.
Oh yeah, specs... WinXP, IE 6.0
I'm not familiar with that particular Netgear model, but it sounds like an issue with "secure" pages/sites. Check the router's settings and your system's settings to make sure you're not blocking secure/SSL connections.
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
This may sound kinda silly, but just to make sure the netgear isn't the issue, if you remove it from the loop, and just plug in your pc to your cable modem (or DSL, or whatever), can you get to Hotmail again?
I know it sounds funny, but sometimes that stuff just happens.
You could also try hard-resetting the router.
Good Luck!
I know it sounds funny, but sometimes that stuff just happens.
You could also try hard-resetting the router.
Good Luck!
•
•
•
•
Originally Posted by vermonter
This may sound kinda silly, but just to make sure the netgear isn't the issue, if you remove it from the loop, and just plug in your pc to your cable modem (or DSL, or whatever), can you get to Hotmail again?
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
•
•
•
•
Originally Posted by DMR
I'm not familiar with that particular Netgear model, but it sounds like an issue with "secure" pages/sites. Check the router's settings and your system's settings to make sure you're not blocking secure/SSL connections.
Hi igreenb, welcome to TechTalk 
We ask that members not tag their questions on to a thread previously started by another member (regardless of how similar your problem might seem). Not only does it divert the focus of the thread away from the original poster's problem, but it also makes it less likely that you yourself will get the individual attention that you need.
Please start your own thread and post your question there. When you do, please try to give us as much specific info as possible regarding the problem (exact error messages, system specs, etc.).
For a full description of our posting guidelines and general rules of conduct, please see this page:
http://www.daniweb.com/techtalkforum..._faq#faq_rules
Thanks for understanding.
We ask that members not tag their questions on to a thread previously started by another member (regardless of how similar your problem might seem). Not only does it divert the focus of the thread away from the original poster's problem, but it also makes it less likely that you yourself will get the individual attention that you need.
Please start your own thread and post your question there. When you do, please try to give us as much specific info as possible regarding the problem (exact error messages, system specs, etc.).
For a full description of our posting guidelines and general rules of conduct, please see this page:
http://www.daniweb.com/techtalkforum..._faq#faq_rules
Thanks for understanding.
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
Firstly, thanks a lot for the replies, haven't had much time lately but here's an update...
So I disconnected the router and pluged in my old USB ADSL modem, which I am using at the moment. Guess what though... can't access secure sites! So that tells us that the router isn't the issue here... must be something on my system, which leads me to...
Can anyone explain how to do this? I've looked in Internet Options and the only thing I can see about SSL is certificates.
Thanks again.
•
•
•
•
Originally Posted by vermonter
This may sound kinda silly, but just to make sure the netgear isn't the issue, if you remove it from the loop, and just plug in your pc to your cable modem (or DSL, or whatever), can you get to Hotmail again?
•
•
•
•
Originally Posted by DMR
Check your system's settings to make sure you're not blocking secure/SSL connections
Thanks again.
At the bottom of the Advanced tab in Internet Options there are a couple of options to use SSL 2.0 and 3.0, although by default those are checked, so that's probably not the issue.
Do you have any firewall software like Norton Internet Security running? If so, that might be blocking traffic on the port (443) used for secure web communications; disable any firewall software and see if that helps.
I'm assuming you're using Internet Explorer; do you have any other browser installed which you could try? If not, you might want to install Netscape, Opera, or Firefox and see if you experience the same error using one of those browsers.
Do you have any firewall software like Norton Internet Security running? If so, that might be blocking traffic on the port (443) used for secure web communications; disable any firewall software and see if that helps.
I'm assuming you're using Internet Explorer; do you have any other browser installed which you could try? If not, you might want to install Netscape, Opera, or Firefox and see if you experience the same error using one of those browsers.
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
OK! i've had that same problem, i wasn't able to open hotmail or log into messenger since i connected my pc to my brand new netgear router 2 or 3 month ago. I tought it was problem of my installed system SuSE Linux 10.1 but i realized it was impossible to connect even on Windows "OS", so i started looking for a way to solve that little problem (coz i don't have any hotmail account) and just 5 or 10 minutes ago i found the solution.
First of all you all should know that i have a "netgear" router and i don't know if routers of others brands have the same options that mine so try to find a similar option on the configuration page.
It was pretty easy but take a long time to solve it because i didn't know what i was doing, i just can tell that hotmail and messenger run as fast as any other service.
Solution (Netgear Router):
1. Open the configuration page of the router (for me 192.168.2.1).
2. Go to the "WAN Setup" option on the left of the page.
3. Enable the "Respond to Ping on Internet Port" option.
4. Click on the apply button.
That's it. if it work for you don't ask me why that solve the problem because i don't have any idea, it just fixed the problem for me. If it didn't, keep looking on the configuration page, i'm sure there must be something wrong with the configuration.
First of all you all should know that i have a "netgear" router and i don't know if routers of others brands have the same options that mine so try to find a similar option on the configuration page.
It was pretty easy but take a long time to solve it because i didn't know what i was doing, i just can tell that hotmail and messenger run as fast as any other service.
Solution (Netgear Router):
1. Open the configuration page of the router (for me 192.168.2.1).
2. Go to the "WAN Setup" option on the left of the page.
3. Enable the "Respond to Ping on Internet Port" option.
4. Click on the apply button.
That's it. if it work for you don't ask me why that solve the problem because i don't have any idea, it just fixed the problem for me. If it didn't, keep looking on the configuration page, i'm sure there must be something wrong with the configuration.
•
•
•
•
Originally Posted by fedderico10 
OK! i've had that same problem, i wasn't able to open hotmail or log into messenger since i connected my pc to my brand new netgear router 2 or 3 month ago. I tought it was problem of my installed system SuSE Linux 10.1 but i realized it was impossible to connect even on Windows "OS", so i started looking for a way to solve that little problem (coz i don't have any hotmail account) and just 5 or 10 minutes ago i found the solution.
First of all you all should know that i have a "netgear" router and i don't know if routers of others brands have the same options that mine so try to find a similar option on the configuration page.
It was pretty easy but take a long time to solve it because i didn't know what i was doing, i just can tell that hotmail and messenger run as fast as any other service.
Solution (Netgear Router):
1. Open the configuration page of the router (for me 192.168.2.1).
2. Go to the "WAN Setup" option on the left of the page.
3. Enable the "Respond to Ping on Internet Port" option.
4. Click on the apply button.
That's it. if it work for you don't ask me why that solve the problem because i don't have any idea, it just fixed the problem for me. If it didn't, keep looking on the configuration page, i'm sure there must be something wrong with the configuration.
|
Similar Threads
- Dlink router blocking hotmail (Networking Hardware Configuration)
Other Threads in the Networking Hardware Configuration Forum
- Previous Thread: I can see the drive, but not whats in it! Help!
- Next Thread: HP Laserjet 4050 TN
| Thread Tools | Search this Thread |
Latest Networking Hardware Configuration Posts
Related Forum Features
Tag cloud for Networking Hardware Configuration
802.11 802.11ac 802.11n bluetooth british broadband browserproblems bt cloud connectionproblem connectivity cpu data data-center desktop dual ethernet firewall gigabit gigabyte green growth hardware hong-kong ibm infrastructure internet memory mobile-apps network networking networks news office program rdimm reliability riched20.dll router routers server setup small storage survey technology telecoms troubleshoot uk upgrade videoconferencing view virgin wifi wireless wirelessnetworking
