| | |
bit of a newbie question but... pls help :)
Thread Solved |
•
•
Join Date: Mar 2008
Posts: 6
Reputation:
Solved Threads: 0
hi there,
A few months ago i decided to build a completely new machine, aiming to design a powerful gaming machine, after some discussions about my hardware, i have decided i think i need to upgrade, im not an expert on hardware so this is where you guys come in
...
I am currently using http://www.overclockers.co.uk/showpr...atid=8&subcat= and for some reason i am getting the feeling this is crap ram and i should use faster, the problem is, does anyone recommend any basic specs for a 4gb that i should aim for, speed, timings etc etc...
Also i am thinking of getting a different OS, i currently use XP prof but am considering a change, does anyone know of a better OS that i could use, (faster etc)...
Thanks for the help
Jfuller113
A few months ago i decided to build a completely new machine, aiming to design a powerful gaming machine, after some discussions about my hardware, i have decided i think i need to upgrade, im not an expert on hardware so this is where you guys come in
...I am currently using http://www.overclockers.co.uk/showpr...atid=8&subcat= and for some reason i am getting the feeling this is crap ram and i should use faster, the problem is, does anyone recommend any basic specs for a 4gb that i should aim for, speed, timings etc etc...
Also i am thinking of getting a different OS, i currently use XP prof but am considering a change, does anyone know of a better OS that i could use, (faster etc)...
Thanks for the help
Jfuller113
It's best to match your RAM to your motherboard and processor. So, if you're getting a new Mobo and CPU soon you should decide on that before buying RAM.
If you've already got your sweet new mobo and CPU, then it's a fair bet some 800MHz might unleash some more overclocking power, but it depends on what you've got.
For stock standard use I think your 667MHz should be OK, but as I said, it depends on what you've got. A 'powerful gaming machine' needs 800MHz RAM, IMO.
Next step up is something like THIS which is 800MHz.
I don't know much about latency (except that less is more, or something like that)
Your motherboard manufacturer's website should list all the RAM it's tested to work in your mobo. A good place to start.
If you've already got your sweet new mobo and CPU, then it's a fair bet some 800MHz might unleash some more overclocking power, but it depends on what you've got.
For stock standard use I think your 667MHz should be OK, but as I said, it depends on what you've got. A 'powerful gaming machine' needs 800MHz RAM, IMO.
Next step up is something like THIS which is 800MHz.
I don't know much about latency (except that less is more, or something like that)
Your motherboard manufacturer's website should list all the RAM it's tested to work in your mobo. A good place to start.
•
•
Join Date: Mar 2008
Posts: 6
Reputation:
Solved Threads: 0
yehh i have been reading some of the other RAM problem threads to try and understand a little more about speed of RAM etc.. and i came across the latency/timings, i am puzzled when it comes to timings, it makes sense to me that the less the better, but im not sure, is that correct? Also i have been reading that DDR2 RAM has higher latency but higher memory speed...
Not quite sure if im correct in saying so.
Not quite sure if im correct in saying so. Last edited by jfuller113; Mar 31st, 2008 at 6:49 am.
Yeah, less latency is better (it's the time taken for a signal to go through the RAM and back, so quicker, or lower number, is better) What each of the numbers mean specifically I don't know.
The main 'buzz' topic lately is (was) that the new DDR3 has higher latency but faster speeds than DDR2 (and is freakishly expensive). However, I've heard people say that the high speeds are more than adequate compensation for the higher latency. You need a DDR3 board to run DDR3, they're not inter-changeable.
The main 'buzz' topic lately is (was) that the new DDR3 has higher latency but faster speeds than DDR2 (and is freakishly expensive). However, I've heard people say that the high speeds are more than adequate compensation for the higher latency. You need a DDR3 board to run DDR3, they're not inter-changeable.
IMO that is the best for gaming.
Vista gives you Direct-X 10 possibilities, but personally I'm still using XP pro.
I tried dual booting XP and Vista for a while, but it's a pain having 2 OSs, so I just went back to XP.
The more time goes by, the more attractive Vista will become (most new PCs ship with it now, so parts have to be compatible). I'll switch to it eventually I suppose, but I'm in no hurry.
Vista gives you Direct-X 10 possibilities, but personally I'm still using XP pro.
I tried dual booting XP and Vista for a while, but it's a pain having 2 OSs, so I just went back to XP.
The more time goes by, the more attractive Vista will become (most new PCs ship with it now, so parts have to be compatible). I'll switch to it eventually I suppose, but I'm in no hurry.
![]() |
Similar Threads
- newbie c++ help (C++)
Other Threads in the Motherboards, CPUs and RAM Forum
- Previous Thread: hi i need boot rom bios for asus ptgd1-la
- Next Thread: please help me
| Thread Tools | Search this Thread |





