Reply

Join Date: Aug 2008
Posts: 15
Reputation: nanner30 is an unknown quantity at this point 
Solved Threads: 0
nanner30 nanner30 is offline Offline
Newbie Poster

Help With Machine

 
0
  #1
Aug 18th, 2008
Hi I just found this forumn and has quite a bit of useful information hope someone can help me out
I was just given an Hp a210n tower problem is when I push the button on the front nothing happens the fans will not turn on but the LED on back of computer comes on when plugged in and stays green is this something that can be fixed easily or not I am willing to try it myself first before taking to local BB as they don't know to much I seem to know more than them and I am just a housekeeper

Thanks so much for any help or advice that is given
Last edited by nanner30; Aug 18th, 2008 at 10:36 pm. Reason: Forgot to add thank you
Reply With Quote Quick reply to this message  
Join Date: Jan 2008
Posts: 111
Reputation: 4th&3wood is an unknown quantity at this point 
Solved Threads: 5
4th&3wood 4th&3wood is offline Offline
Junior Poster

Re: Help With Machine

 
0
  #2
Aug 19th, 2008
Does the fan in the PSU come on when you press the on button?
I wouldn't join any club that would have me as a member.
Groucho Marx
Reply With Quote Quick reply to this message  
Join Date: Aug 2008
Posts: 15
Reputation: nanner30 is an unknown quantity at this point 
Solved Threads: 0
nanner30 nanner30 is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #3
Aug 19th, 2008
no fans come on at all
Reply With Quote Quick reply to this message  
Join Date: Jul 2007
Posts: 20
Reputation: hardball is an unknown quantity at this point 
Solved Threads: 0
hardball hardball is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #4
Aug 19th, 2008
if the fans in the power supply don't come on I would say your power supply is bad. Changing a PSU is not difficult but if you never opened a computer I would not recommend it.
Reply With Quote Quick reply to this message  
Join Date: Aug 2008
Posts: 15
Reputation: nanner30 is an unknown quantity at this point 
Solved Threads: 0
nanner30 nanner30 is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #5
Aug 19th, 2008
thank you for the reply i figured that is what it was so i am ordering one and I have worked on computers somewhat so I am gonna try it and will let you know the results thanks again for the your help
Reply With Quote Quick reply to this message  
Join Date: Jul 2007
Posts: 20
Reputation: hardball is an unknown quantity at this point 
Solved Threads: 0
hardball hardball is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #6
Aug 19th, 2008
just make sure your 2 plugs on the motherboard are on tight. They are keyed so they only go on one way. Pay attention to how you remove the old one and you shouldn't have any problems...good luck
Reply With Quote Quick reply to this message  
Join Date: Aug 2008
Posts: 15
Reputation: nanner30 is an unknown quantity at this point 
Solved Threads: 0
nanner30 nanner30 is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #7
Aug 19th, 2008
thank you again so much for the useful information
Reply With Quote Quick reply to this message  
Join Date: Aug 2008
Posts: 15
Reputation: nanner30 is an unknown quantity at this point 
Solved Threads: 0
nanner30 nanner30 is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #8
Aug 25th, 2008
Well I installed new PSU got power now but nothing comes up on the monitor. Going to go back in and double check that all wires are tight and memory is seated right will report back.
Reply With Quote Quick reply to this message  
Join Date: Jul 2007
Posts: 20
Reputation: hardball is an unknown quantity at this point 
Solved Threads: 0
hardball hardball is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #9
Aug 25th, 2008
double check the memory modules and your video cable..if you have a seperate video card (not onboard video) check and make sure the video card is seated and the thumb screws are tight. Is the hard drive spinning?
Reply With Quote Quick reply to this message  
Join Date: Aug 2008
Posts: 15
Reputation: nanner30 is an unknown quantity at this point 
Solved Threads: 0
nanner30 nanner30 is offline Offline
Newbie Poster

Re: Help With Machine

 
0
  #10
Aug 25th, 2008
Installed new PSU have power now but nothing comes up on the monitor, Have checked all cables to make sure they are on nice and tight,and they are. Memory is also seated correctly. What can I try next? Hard Drive???
Thanks for the help
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Troubleshooting Dead Machines Forum
Thread Tools Search this Thread



About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC