I've installed a new pci-e sata2 raid card, but it won't detect any hard drive.
When i access the software to set up the raid, (silicon image 3132) right after the bios, it doesn't show any physical drives, as if there was no hdd connected to it at all. Jumper settings on the raid card are ok. Power to the hdd's is ok.
I'm connecting 2 identical hdds, WD 160gb, sataII. One of them has got data, and the other one is just formatted. Both of them are detected if i connect them directly to the sata ports on the motherboard.
I've explored the bios but i couldn't find anything that would have anything to do with raids or pci-e being disabled. The motherboard is an Intel D945GCCR.
The raid card is an Encore ENLSA2-2C-PCIE.
Thanks a lot for your help.
Lenni.