| | |
Symbios Raid Problem
![]() |
•
•
Join Date: Dec 2007
Posts: 252
Reputation:
Solved Threads: 27
I have a raid 5 that I am attempting to setup. They firmware is Symbios and while in post I can view the drives and set them up to work on boot. The NVRam is active. Now when I boot the machine the raid says that it has failed. I can view all the disks in the disk manager. The driver for this is a LSI Logic 8951U/8952U Adapter; 53C895. I am at a total loss on setting this up. Any ideas or help is greatly appreciated.
Should add this is on a HP Netserver LH4 running server 2003 R2 Enterprise.
Thanks
Should add this is on a HP Netserver LH4 running server 2003 R2 Enterprise.
Thanks
Last edited by ProfessorPC; Feb 14th, 2009 at 2:02 pm.
•
•
Join Date: May 2005
Posts: 514
Reputation:
Solved Threads: 19
I had a very similar issue. The solution was to upgrade the bios on the machine itself.
I believe it needed 4.x or higher but it was a very long time ago.
Visit HP site and upgrade the BIOS on that LH4
I believe it needed 4.x or higher but it was a very long time ago.
Visit HP site and upgrade the BIOS on that LH4
![]() |
Other Threads in the Storage Forum
- Previous Thread: HD OS swap
- Next Thread: Recommendation for a MyBook replacement
| Thread Tools | Search this Thread |
acronis archivevault atmail backup backupandrecoverystrategy blinkingcursor boot data databasededuplication datadeduplicationsoftware datarecovery datastorage deduping deduplicating deduplication deduplicationalgorithm deduplicationsoftware deduplicationsystems deduplicationtechnology disasterrecovery disasterrecoverydatabase disc-drive discdrives drive emailappliance emailarchive emailstorage failure filters gmail hard hitachi mail maxtor news nobelprize norton offsitestorage partition power recovery restoreserverdatabase serverdatarecovery serverdisasterrecovery serverrecoverysoftware storage terabyte undelete upper windowsserverrestore





