sony cdrw crx230e stoped burning.
 

Hi all i'm new here and only have a basic to average knowledge of pc's, hope you can help??? I have searched many other post's with simillar symptoms all over the net but fail to get any result's
sony cdrwcrx230e generally use memorex cd-r's with great success!
I have used and burnt succesfully for a couple of years with light use.Using nero6 WMP pinnacle .Just recently the drive has had trouble reading discs in general sometimes blanks sometimes pre records, occasionally making my pc reboot!!I downloaded daemon tools light as i thought i may have software driver issue's. This didn't work at all so i removed it, and since then i cannot write at all to disc. It goes through the process fine then errors at the point of actual burn.In wmp it will record and finalize approx 30 seconds of just 1 track . Nero and pinnacle just fail end of.
I have updated the firmware , to no avail!uninstalled and rebooted none of which has worked.
See Nero error report below-11.1.2008
CD-ROM (MP3)
13:36:41 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:36:41 #2 Phase 96 File dlgbrnst.cpp, Line 1800
Buffer underrun error protection activated

13:36:41 #3 Text 0 File Reader.cpp, Line 118
Reader running

13:36:41 #4 Text 0 File Writer.cpp, Line 124
Writer SONY CD-RW CRX230E running

13:36:41 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

13:36:41 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media

13:36:41 #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 154728 ( 34:25.03)

13:36:41 #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

13:36:41 #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY CD-RW CRX230E;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

13:36:41 #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:36:41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 154729 (154729) = #154729/34:23.4
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 154727 blocks [SONY CD-RW CRX230E ]
--------------------------------------------------------------

13:36:41 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY CD-RW CRX230E ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 317192192, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
154729 | lead-out | 1 | 0x00 | 0x41

13:36:41 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 154729 -> 154727.

13:36:41 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

13:36:41 #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

13:36:41 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

13:36:41 #17 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 32x (4,800 KB/s)

13:36:41 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:36:41 #19 Text 0 File Mmc.cpp, Line 19451
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON

13:37:37 #20 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04830000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0xCC 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

13:37:37 #21 CDR -1135 File Writer.cpp, Line 301
Write error

13:37:37 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

13:37:37 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

13:37:37 #24 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
SONY CD-RW CRX230E\H1 T1

13:37:37 #25 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

13:37:37 #26 Text 0 File Mmc.cpp, Line 14287
start Close Session

13:37:43 #27 SCSI -1176 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

13:37:43 #28 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error

13:37:43 #29 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

13:37:43 #30 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

13:37:43 #31 Text 0 File Mmc.cpp, Line 14287
start Close Session

13:37:43 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

13:37:43 #33 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 32x (4,800 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 07/03/2007 23:51:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 07/03/2007 23:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Re: sony cdrw crx230e stoped burning.
 

This could be a bad drive or bad media.
You could try reinstalling Nero, and check the Nero site for updates.

Re: sony cdrw crx230e stoped burning.
 

Thanks. Think this could be an aspi issue!!

Re: sony cdrw crx230e stoped burning.
 

Maybe.
Run the Nero info tool to see what's installed.