DaniWeb IT Discussion Community

DaniWeb IT Discussion Community (http://www.daniweb.com/forums/index.php)
-   Monitors, Displays and Video Cards (http://www.daniweb.com/forums/forum121.html)
-   -   Dead LCD Monitor (http://www.daniweb.com/forums/thread121161.html)

xorgate Apr 26th, 2008 9:30 pm
Dead LCD Monitor
 
I have an LCD monitor here that just stopped working the other day. Anytime you turn it on, it flashes a left to right gradiant of black to red, green, or blue. The power light also shows orange, so it doesn't seem to be getting a signal from the pc. I have tried several PCs, but to no avail. Does anyone know what would be wrong?

P.S. It's an Norcent LM730.

bobbyraw Apr 26th, 2008 9:48 pm
Re: Dead LCD Monitor
 
on the monitor there are a few buttons that you should be able to press. try those and see if you get any desktop display.

xorgate Apr 26th, 2008 9:52 pm
Re: Dead LCD Monitor
 
None at all.

itdupuis Apr 29th, 2008 12:58 pm
Re: Dead LCD Monitor
 
What brand of monitor is it? Have you checked to see if all cables are properly seated? Some manufacturers have a reset button located in a hidden area, this could be something else to check as well. Hit us back if you make any progress.....

joytech22 May 22nd, 2008 8:25 pm
Re: Dead LCD Monitor
 
if the cable is damaged, you will have to get a new one.

Not all damage can be seen because inside that big black wire is more wires.

inside of one of those wires might be a break.

BILLMOL Oct 21st, 2009 6:24 pm
I have norcent lm730 monitor
on start up it flashes on and straight off
if i attempt to turn it on even after the computer is fully booted the monitor just flashes on the sreen for only a few seconds
have tried another monitor and that works
think it is a capacitor in thpoew supply of the monitor the question is which one the 1000 mfd 16 volt or another
billmol


All times are GMT -4. The time now is 4:35 pm.

Forum system based on vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
©2003 - 2009 DaniWeb® LLC