DaniWeb IT Discussion Community

DaniWeb IT Discussion Community (http://www.daniweb.com/forums/index.php)
-   Windows NT / 2000 / XP (http://www.daniweb.com/forums/forum10.html)
-   -   Win 2000: kmode exception not handled - any ideas? (http://www.daniweb.com/forums/thread13489.html)

JohnnyT Nov 4th, 2004 9:37 am
Win 2000: kmode exception not handled - any ideas?
 
Hi,

Due to my laptop having a strange COM port problem I decided to try and fix it by doing a 'repair' with my Windows 2000 Professional disk. When I put the disk in, it asked if I wanted to 'upgrade' and keep all my existing software or 'full install' and lose everything.

I chose upgrade and it spent some time gathering information, building drivers etc...

When it rebooted it came up with a Setup screen that said it was installing devices such as keyboard, mouse. (During this time your screen may flicker etc).

It gets about half way through and then I get a message saying:
"Digital Signature Not Found on Intel(R) 82815 Graphics Controller, Do you want to continue installation?"

It doesn't matter whether I press Yes or No at this point, it continues the installation for a short time and then flashes up the blue screen of death saying:
"STOP: 0x0000001E {0xC0000005,0X00000000,0X00000000,0X00000000}
KMODE_EXCEPTION_NOT_HANDLED

Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or technical support group."

More like contact Alcoholics Anonymous, this thing is driving me mad!

So far, I've tried booting into Safe Mode but no joy, it still brings up the 'setup' screen and tries to continue setting up.

I've tried booting from the CD and Repairing the installation again, but upon reboot it still tries to continue setting up.

I just want to turn off the setting up now and boot into the existing operating system.

I tried booting into Console Repair and managed to copy Boot.ini to Boot2.ini and then copy Boot.bak to Boot.ini in the hope that this would maybe bypass the setup screen, but still no joy.

I just want to get back into the computer now.. I don't care about the COM port problem any more...

Please please please help if you can.

A big thanks for any light you can shed on this.. I've tried to provide as much info as possible but if you need anymore just ask.

Cheers

JT

nanosani Nov 5th, 2004 4:33 am
Re: Win 2000: kmode exception not handled - any ideas?
 
You must now reinstall your windows ... dont upgrade it .. just install a fresh copy.

JohnnyT Nov 5th, 2004 5:48 am
Re: Win 2000: kmode exception not handled - any ideas?
 
Quote:

Originally Posted by nanosani
You must now reinstall your windows ... dont upgrade it .. just install a fresh copy.

NOOOOOooooooooo !
*falls on his knee's clutching his head and looks to the sky*
WHHHHHYYYYYYYyyyyyyyyy !!!!!!
*sobs frantically*


What I meant to say was, are you sure? Absolutely sure? There's stuff on that computer that I really really don't want to lose. Is there no other way of getting around this?

:-|

cattygurl May 23rd, 2005 7:39 am
Re: Win 2000: kmode exception not handled - any ideas?
 
Hey,
I am having the same problem with Windows 2000 Prof.
I am just wondering if you had to reinstall JohnnyT, because as you said...I really don't want to do that all again. I just got it installed last month.
Thanks!!
:rolleyes:

JohnnyT May 23rd, 2005 9:01 am
Re: Win 2000: kmode exception not handled - any ideas?
 
CattyGurl

I'm afraid I had to do a full reinstallation to get it working...

There may be another way but if there is, I couldn't find it...

So... boil the coffee... its gonna be a long night....

(sorry I couldn't be more help)

;)

cattygurl May 23rd, 2005 2:05 pm
Re: Win 2000: kmode exception not handled - any ideas?
 
Thats OK,
Oh well here we go again...
Thanks!!
Cattygurl
:cool:

itsme_Boxman May 23rd, 2005 2:25 pm
Re: Win 2000: kmode exception not handled - any ideas?
 
Yes well, we have all been there. I can't even rememeber now how many times i have installed an OS...


On a personal note, those who need to reinstall especially on a laptop, should consider formating your hard drive with 2 partitions. Use the first partition @ about 10 gigs (+/- depending) or so for the operating system and the program files, use the second partion for your personal files folders, pictures, install files, downloaded stuff... etc... MOVE THE DRIVERS YOU DOWNLOAD FOR YOUR LAPTOP TO THAT SECOND PARTITION ALSO!!! :-) The default extract folder is alwas on C:\ you will find it much more convinient when reinstalling kowing your drivers are close by. and you dont have to dig up the cds, or download everythign yet again.

Can even convieniently redirect the my docs folder to the second partion. Right click My docs, click move, browse for a folder on the scond partition...click move


next time you need to reinstall, due to configuration issues, viruses, "testing", and the like you just have to format the first partion and reinstall the OS. The second partion is not affected by the reinstall. all your files are safe.

This has proved very effective for me in the past with laptops that crash, since hooking up a second drive to reinstall so you can get the data off before formating is difficult with a laptop.

Just a little piece of advice on reinstalling. I also do this will all my desktops. Especially convinient if you install/re-install with images..

Sinistar6 Oct 3rd, 2006 8:37 pm
Re: Win 2000: kmode exception not handled - any ideas?
 
As we all know, reinstalling is the default answer to any question we dont want to discuss anymore. We should get our MCSE for knowing two blanket statements "Did you reset the computer" and "you must reinstall the OS...so sorry". This whole reinstall fad came after cloning so I blame symantec for desensitizing the industry to the horrors of a reinstall.
Part of the reason your particular problem (AND MINE) is so hard to diagnose is because KMODE can refer to so many different things. In your case the culprit is the videocard driver. So my quick answer, which is probably much more "cost effective" then reinstalling is buying a cheap vid card, disabling the onboard vid in bios, and then see if you can boot up. If you can we know its the vid card/driver. I also have a KMODE error after upgrading Win 2000. Mine ends with the WIN32K.sys which points to USB drivers. I derived most of this information from here.

http://www.mcse.ms/archive42-2004-10-1125261.html

Good Luck Peep!

joeaksa Dec 17th, 2006 5:03 am
Re: Win 2000: kmode exception not handled - any ideas?
 
Quote:

Originally Posted by JohnnyT (Post 65495)
NOOOOOooooooooo !
*falls on his knee's clutching his head and looks to the sky*
WHHHHHYYYYYYYyyyyyyyyy !!!!!!
*sobs frantically*


What I meant to say was, are you sure? Absolutely sure? There's stuff on that computer that I really really don't want to lose. Is there no other way of getting around this?

:-|

One sure way to get around this is to partition your hard drive into two sections. You can do this either before installing anything on it in the beginning, or using an aftermarket program afterwards.

I have a "C" drive for my operation system and most major programs. I then make the other half of the hard drive the "D" section. Its used for ALL of my data like documents, photos, bookmarks, emails and so on.

This way if I ever have an issue with the OS I can pop the CD in the drive and format "C" and reinstall the OS without losing ANY of my data. Yes, you still have to re-install the various programs but thats life. They only way you are going to lose the second partition (and thus your data) is if you have a total hard drive failure.

Before anyone asks, yes I do backup, but this is an easy way to avoid losing large amounts of personal data if you have to re-install the OS.

JA

scooby_dooby Feb 19th, 2008 7:59 pm
Re: Win 2000: kmode exception not handled - any ideas?
 
Quote:

Originally Posted by Sinistar6 (Post 259556)
As we all know, reinstalling is the default answer to any question we dont want to discuss anymore. We should get our MCSE for knowing two blanket statements "Did you reset the computer" and "you must reinstall the OS...so sorry". This whole reinstall fad came after cloning so I blame symantec for desensitizing the industry to the horrors of a reinstall.
Part of the reason your particular problem (AND MINE) is so hard to diagnose is because KMODE can refer to so many different things. In your case the culprit is the videocard driver. So my quick answer, which is probably much more "cost effective" then reinstalling is buying a cheap vid card, disabling the onboard vid in bios, and then see if you can boot up. If you can we know its the vid card/driver. I also have a KMODE error after upgrading Win 2000. Mine ends with the WIN32K.sys which points to USB drivers. I derived most of this information from here.

http://www.mcse.ms/archive42-2004-10-1125261.html

Good Luck Peep!

I had similar problems, and disabled usb in my bios. That was the problem. Now how do I fix it now that i know what is wrong with it??


All times are GMT -4. The time now is 10:26 am.

Forum system based on vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
©2003 - 2009 DaniWeb® LLC