Hi everyone,
I have a problem with a dll file. I have a 32 bit dll file and a program (x86 debugged) which uses the functions exported from the dynamic link library file and working well. I changed my program codes to 64 bit along time ago without an error and without changing the codes of calling functions. I also found the source code of the dll file and debugged the 64 bit dll file (x64 debug) without any error or warning. But when I call a function from the dll file, it does nothing. No error or warning messages instead! The declaration of the functions in the dll file are listed below:
#pragma once
#include "stdafx.h"
#define DLLEXPORT __declspec(dllexport)
// --- Define the EPANET toolkit constants
#define EN_ELEVATION 0
#define EN_BASEDEMAND 1
#define EN_PATTERN 2
#define EN_EMITTER 3
#define EN_INITQUAL 4
#define EN_SOURCEQUAL 5
#define EN_SOURCEPAT 6
#define EN_SOURCETYPE 7
#define EN_TANKLEVEL 8
#define EN_DEMAND 9
#define EN_HEAD 10
#define EN_PRESSURE 11
#define EN_QUALITY 12
#define EN_SOURCEMASS 13
#define EN_INITVOLUME 14
#define EN_MIXMODEL 15
#define EN_MIXZONEVOL 16
#define EN_DIAMETER 0
#define EN_LENGTH 1
#define EN_ROUGHNESS 2
#define EN_MINORLOSS 3
#define EN_INITSTATUS 4
#define EN_INITSETTING 5
#define EN_KBULK 6
#define EN_KWALL 7
#define EN_FLOW 8
#define EN_VELOCITY 9
#define EN_HEADLOSS 10
#define EN_STATUS 11
#define EN_SETTING 12
#define EN_ENERGY 13
#define EN_DURATION 0
#define EN_HYDSTEP 1
#define EN_QUALSTEP 2
#define EN_PATTERNSTEP 3
#define EN_PATTERNSTART 4
#define EN_REPORTSTEP 5
#define EN_REPORTSTART 6
#define EN_RULESTEP 7
#define EN_STATISTIC 8
#define EN_PERIODS 9
#define EN_NODECOUNT 0
#define EN_TANKCOUNT 1
#define EN_LINKCOUNT 2
#define EN_PATCOUNT 3
#define EN_CURVECOUNT 4
#define EN_CONTROLCOUNT 5
#define EN_JUNCTION 0
#define EN_RESERVOIR 1
#define EN_TANK 2
#define EN_CVPIPE 0
#define EN_PIPE 1
#define EN_PUMP 2
#define EN_PRV 3
#define EN_PSV 4
#define EN_PBV 5
#define EN_FCV 6
#define EN_TCV 7
#define EN_GPV 8
#define EN_NONE 0
#define EN_CHEM 1
#define EN_AGE 2
#define EN_TRACE 3
#define EN_CONCEN 0
#define EN_MASS 1
#define EN_SETPOINT 2
#define EN_FLOWPACED 3
#define EN_CFS 0
#define EN_GPM 1
#define EN_MGD 2
#define EN_IMGD 3
#define EN_AFD 4
#define EN_LPS 5
#define EN_LPM 6
#define EN_MLD 7
#define EN_CMH 8
#define EN_CMD 9
#define EN_TRIALS 0
#define EN_ACCURACY 1
#define EN_TOLERANCE 2
#define EN_EMITEXPON 3
#define EN_DEMANDMULT 4
#define EN_LOWLEVEL 0
#define EN_HILEVEL 1
#define EN_TIMER 2
#define EN_TIMEOFDAY 3
#define EN_AVERAGE 1
#define EN_MINIMUM 2
#define EN_MAXIMUM 3
#define EN_RANGE 4
#define EN_NOSAVE 0
#define EN_SAVE 1
#define EN_INITFLOW 10
// --- Declare the EPANET toolkit functions
int DLLEXPORT ENepanet(char *, char *, char *, void (*) (char *));
int DLLEXPORT ENopen(char *, char *, char *);
int DLLEXPORT ENsaveinpfile(char *);
int DLLEXPORT ENclose(void);
int DLLEXPORT ENsolveH(void);
int DLLEXPORT ENsaveH(void);
int DLLEXPORT ENopenH(void);
int DLLEXPORT ENinitH(int);
int DLLEXPORT ENrunH(long *);
int DLLEXPORT ENnextH(long *);
int DLLEXPORT ENcloseH(void);
int DLLEXPORT ENsavehydfile(char *);
int DLLEXPORT ENusehydfile(char *);
int DLLEXPORT ENsolveQ(void);
int DLLEXPORT ENopenQ(void);
int DLLEXPORT ENinitQ(int);
int DLLEXPORT ENrunQ(long *);
int DLLEXPORT ENnextQ(long *);
int DLLEXPORT ENstepQ(long *);
int DLLEXPORT ENcloseQ(void);
int DLLEXPORT ENwriteline(char *);
int DLLEXPORT ENreport(void);
int DLLEXPORT ENresetreport(void);
int DLLEXPORT ENsetreport(char *);
int DLLEXPORT ENgetcontrol(int, int *, int *, float *,
int *, float *);
int DLLEXPORT ENgetcount(int, int *);
int DLLEXPORT ENgetoption(int, float *);
int DLLEXPORT ENgettimeparam(int, long *);
int DLLEXPORT ENgetflowunits(int *);
int DLLEXPORT ENgetpatternindex(char *, int *);
int DLLEXPORT ENgetpatternid(int, char *);
int DLLEXPORT ENgetpatternlen(int, int *);
int DLLEXPORT ENgetpatternvalue(int, int, float *);
int DLLEXPORT ENgetqualtype(int *, int *);
int DLLEXPORT ENgeterror(int, char *, int);
int DLLEXPORT ENgetnodeindex(char *, int *);
int DLLEXPORT ENgetnodeid(int, char *);
int DLLEXPORT ENgetnodetype(int, int *);
int DLLEXPORT ENgetnodevalue(int, int, float *);
int DLLEXPORT ENgetlinkindex(char *, int *);
int DLLEXPORT ENgetlinkid(int, char *);
int DLLEXPORT ENgetlinktype(int, int *);
int DLLEXPORT ENgetlinknodes(int, int *, int *);
int DLLEXPORT ENgetlinkvalue(int, int, float *);
int DLLEXPORT ENgetversion(int *);
int DLLEXPORT ENsetcontrol(int, int, int, float, int, float);
int DLLEXPORT ENsetnodevalue(int, int, float);
int DLLEXPORT ENsetlinkvalue(int, int, float);
int DLLEXPORT ENsetpattern(int, float *, int);
int DLLEXPORT ENsetpatternvalue(int, int, float);
int DLLEXPORT ENsettimeparam(int, long);
int DLLEXPORT ENsetoption(int, float);
int DLLEXPORT ENsetstatusreport(int);
int DLLEXPORT ENsetqualtype(int, char *, char *, char *);
When I debug the program, there are only ignorable warning messages like:
Possible problem detected while building assembly 'Kalibrasyon': Referenced assembly 'mscorlib.dll' targets a different processor
Possible problem detected while building assembly 'Kalibrasyon': Referenced assembly 'System.Data.dll' targets a different processor
Is this the reason? Codes ran well on x86 debug. Where is the problem? Any idea will be appreciable.
Thanks
