![]() |
| ||
| RAID 5? I am looking to use faster HDDs for my main system disk. Is RAID 5 a good choice (with 3x 15000 SAS HDDs)? I know that RAID 0 is faster, but I want redundancy without too great of compromise. Is there any speed advantages to RAID 1? Also, I am likely going to buy a 3ware 9690-4I SAS controller card (8x PCIe); will this work in a mobo with PCIe-x16 with a x4 electrical bus (I have 2x Graphics Cards in X-Fire in the other 2 PCIe-x16)? Thanks to any1 brave enough to brave this barrage of questions, U guyz r the best;) ~Mav. |
| ||
| Re: RAID 5? Also worth noting, the 74Gb Raptor and 250Gb Hitachi are being removed and another 750Gb Samsung is likely to be added in the near future (to be mirrored / RAID 1 with the 1st), running out of case room. ~Mav. |
| ||
| Re: RAID 5? Is this thread in the wrong place? Any help is appreciated... |
| ||
| Re: RAID 5? with three drives the only options are raid1+HS, raid0 or raid5 raid0 will be fastest, raid1+HS will be the most redundant |
| ||
| Re: RAID 5? Thanks for the response Dima. What about the card, does anyone know if a PCIe-x8 card will operate in a mobo with PCIe-x16 with a PCIe-x4 electrical? |
| ||
| Re: RAID 5? should work, if the card fits in |
| ||
| Re: RAID 5? Thanks for the help, Mav. |
| All times are GMT -4. The time now is 9:16 am. |
Forum system based on vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
©2003 - 2009 DaniWeb® LLC