Do I have a BIOS problem?
 

I have a Compaq Presario 7000 with a problem. I can't get the BIOS to recognize an IDE harddrive. I would have to say that both IDE controllers are good, as it will recognize an IDE CD-ROM drive. I have tried several known good harddrives with the same results. Do I maybe have a BIOS problem? Anybody tell me a good place to get a BIOS flash for it? I have tried HP's website, with no luck. I can't even find any reference to this system on the HP website.

BTW, this unit may have taken a lightening strike, that definately killed the power supply, but everything else seems to be OK, with the exception of the IDE problem.

Re: Do I have a BIOS problem?
 

check the hdd size and compatibility on mainboard manuals. if they are large check for bios updates

Re: Do I have a BIOS problem?
 

At a guess, I would say that a 1.2 gig HD is well within the parameters of the BIOS. Also, as I stated in my original post, I haven't been able to find a BIOS update as yet.

Re: Do I have a BIOS problem?
 

Is this being used as a slave drive?
Have you got the jumper settings on the hard drive set to slave?
It won't identify much if the jumpers are wrong.

Re: Do I have a BIOS problem?
 

I was trying to set up a drive as a master. I had a CD drive on one IDE, which it recognized fine, and a harddrive on the other, which it wouldn't recognize. I also tried putting both drives on the same IDE, with the HD set as master and the CD as slave, with the same results. It finally, after leaving it alone for a day, recognized the drive in the same configuration it was left in the last time it wouldn't recognize it. I don't really trust the IDE controller after that, so I set it all up with SCSI drives, and ain't worried about the IDE controller anymore. One other question on the same system, though. How far can I overclock a 600 MHz Intel PIII without problems?

Re: Do I have a BIOS problem?
 

See the last paragraph in this link:
http://www.zen26266.zen.co.uk/P3-600.htm

(Nice sig you've got there :lol: )

Re: Do I have a BIOS problem?
 

Nice site. I'll have to bookmark that one. I don't know if my processor is Katmai or Coppermine. It isn't a Slot 1 either, but a Socket 370. Guess I'll have to do a little research to determine exactly which one I have. The computer I am on now, not the one in question, is running a pair of 600 MHz PIII Coppermine, but I don't know if the MB will allow overclocking or not, as it automaticly sets bus speed and multiplier. I haven't seen anywhere to manually set it, as yet. Thanks!

Re: Do I have a BIOS problem?
 

forget it to install small hdd on pentium 3 or later it does not run since the bios and bus are too advanced for that hdd it will reduce you pc to a worm gear and it will create a bottle kneck. You should look in the bios to overclock it. don't overdo it go at least to 650 not over or you will blow it skyhigh.

Re: Do I have a BIOS problem?
 

>>You should look in the bios to overclock it

You mean to overclock the HDD??? never heard about such things... :D

Re: Do I have a BIOS problem?
 

no to overclock the cpu if could do an hdd overclocking i will be the darnest richest men in the forum tadddaa. by the way your cpu could be either since the 600eb cpu was released with the coppermine version