| Re: Problems in Dynaform (Form Mail) URGENT HELP
Here is the Dynaform.php code;
[html]www.focusonedesign.ca/dynaform.php[/html] and my form can be found at [html]www.focusonedesign.ca/form.htm[/html]
Anyone out there with ideas???
Quote:
<?
// ##########################################################################
// ##########################################################################
//
// DynaForm v1.4 - Created by the Webligo Group
// http://www.webligo.com
//
// YOUR USE OR DISTRIBUTION OF THIS SOFTWARE CONSTITUTES YOUR ACCEPTANCE
// OF THE FOLLOWING LICENSE AGREEMENT:
//
// THIS SCRIPT AND ALL OF ITS CONTENTS ARE LICENSED UNDER THE
// GPL FREEWARE LICENSE. IT MAY NOT BE RESOLD OUR USED COMMERCIALLY
// WITHOUT EXPRESSED PERMISSION OF THE WEBLIGO GROUP. IT MAY, HOWEVER,
// BE DISTRIBUTED FREELY WITHOUT CHARGE. THIS SOFTWARE IS INTELLECTUAL
// PROPERTY OF THE WEBLIGO GROUP. ANYONE VIOLATING THIS AGREEMENT WITHOUT
// THE EXPRESSED PERMISSION OF THE WEBLIGO GROUP MAY BE LEGALLY PROSECUTED.
// YOUR DOWNLOAD AND USE OF THIS SOFTWARE ALSO SIGNIFIES THAT YOU UNDERSTAND
// AND AGREE TO THE DOWNLOAD AGREEMENT YOU READ UPON DOWNLOAD.
//
// The Webligo Group, its management, or any of its employees, associates, or
// partners cannot be held liable for any damages that this software may cause.
// As the Licensee and user of the software, you agree to accept full liability
// for any damages or risk involved with using this software.
//
// If you need help installing or using this software, please
// read the readme.txt file that was provided with it.
//
// This file and all related content are the intellectual
// property of the Webligo Group and are under copyright.
//
// If you plan to use this script for your clients, sell it as a service,
// or utilize it in any other commercial manner, you must purchase a commercial
// license. Please see this page for more information:
// http://webligo.com/products_dynaform.php
//
// We do not provide support for this script, unless you have purchased a
// commercial license.
//
// Feel free to visit our website (http://www.webligo.com)
// if you wish to send us any comments, etc.
//
// ###########################################################################
// ###########################################################################
// ###########################################################################
// #### CONFIGURE FROM: ADDRESS ##############################################
// THIS AREA IS OPTIONAL. ONLY TOUCH THESE SETTINGS IF YOU KNOW WHAT YOU ARE
// DOING. PLEASE READ README.TXT FOR MORE INFORMATION.
// If you would like to specify the From: address of emails sent by DynaForm,
// enter it between the double quotes below. If you leave this blank, the
// server will assign the default email address.
// If you want the From: address to be the email address of the user who
// submitted your form, use $from_address = "$_POST[Email]";
// Make sure "Email" is the name of the text field where users enter their
// email address on your form.
$from_address = "";
// ###########################################################################
// ###########################################################################
// ###########################################################################
// #### ACTIVATE REQUIRED FIELDS? ############################################
// THIS AREA IS OPTIONAL. ONLY TOUCH THESE SETTINGS IF YOU KNOW WHAT YOU ARE
// DOING. PLEASE READ README.TXT FOR MORE INFORMATION.
//
// If you would like to make some fields of your form required, change "no" to
// "yes" below.
$required_on = "yes";
// If you have set $required_on to "yes" above, you can make fields required
// by beginning their name with "r_". For example, if you want to require
// a user to enter their name, use the following HTML:
//
// <input type='text' name='r_Name'>
//
// If a user fails to enter a required field, they will be taken to a page
// where a message such as "You have not completed all the required fields."
// will be displayed. Please specify the URL to this file below:
$required_errorpage = "http://www.focusonedesign.ca/oops.htm";
// ###########################################################################
// ###########################################################################
// ###########################################################################
// #### OVERRIDE REQUIRED VARIABLES? #########################################
// THIS AREA IS OPTIONAL. ONLY TOUCH THESE SETTINGS IF YOU KNOW WHAT YOU ARE
// DOING. PLEASE READ README.TXT FOR MORE INFORMATION. NOTE: THIS WILL NOT
// AFFECT YOUR 'TURN ON REQUIRED FIELDS?' SECTION SETTINGS ABOVE.
//
// If you would like to override the three required variables in
// order to hide your email address, email subject, and thank you page
// URL from your email form, change "no" to "yes" below.
$override = "no";
// If override is set to "yes", the hidden variables on your HTML
// email form named "rec_mailto", "rec_subject", and "rec_thanks" will be
// overridden and can therefore be removed from the form.
// If you have set override to "yes" above, you must specify new values for
// each of these variables below.
// Enter the email address(es) to send the email to.
$incoming_mailto = "ksorman@focusonedesign.ca";
// Enter the email subject.
$incoming_subject = "Request Form Submission";
// Enter the thank you page URL.
$incoming_thanks = "http://www.focusonedesign.ca/Thankyou.htm";
// ###########################################################################
// ###########################################################################
// ###########################################################################
// #### BAN IP ADDRESSES? ####################################################
// THIS AREA IS OPTIONAL. ONLY TOUCH THESE SETTINGS IF YOU KNOW WHAT YOU ARE
// DOING. PLEASE READ README.TXT FOR MORE INFORMATION.
//
// If you would like to ban certain IP addresses from submitting your form,
// change "no" to "yes" below.
$ban_ip_on = "no";
// If you have set $ban_ip_on to "yes" above, please enter a list of the
// IP addresses you would like to ban, seperated only by commas.
// An example has been provided below:
$ban_ip_list = "111.222.33.55,11.33.777.99";
// ###########################################################################
// ###########################################################################
// ###########################################################################
// #### ACTIVATE DOMAIN SECURITY? ############################################
//
// THIS AREA IS OPTIONAL. ONLY TOUCH THESE SETTINGS IF YOU KNOW WHAT YOU ARE
// DOING. PLEASE READ README.TXT FOR MORE INFORMATION.
//
// This setting, when set to "yes" (default), will check to make sure other
// people are not submitting data to your dynaform.php file from their
// external domains. This means that if your domain name is "www.mysite.com",
// only forms on "www.mysite.com" will be able to use this dynaform.php.
// IF YOU ARE RECEIVING ERRORS SUCH AS "INVALID DOMAIN" FOR NO REASON, PLEASE
// CHANGE "yes" TO "no" BELOW.
$secure_domain_on = "yes";
// ###########################################################################
// ###########################################################################
// ###########################################################################
// #### ACTIVATE AUTO-RESPONSE? ##############################################
//
// THIS AREA IS OPTIONAL. ONLY TOUCH THESE SETTINGS IF YOU KNOW WHAT YOU ARE
// DOING. PLEASE READ README.TXT FOR MORE INFORMATION.
//
// This setting, when set to "yes", will make DynaForm automatically reply to
// the user who submitted your form with an email message. If you would like
// to use this feature, change "no" to "yes" below.
$autorespond_on = "no";
// If you have set $autorespond_on to "yes" above, you must specify a subject,
// from-address, and message to include in the auto-response email.
// The following setting is the subject of the auto-response email:
$autorespond_subject = "Request Form Submission";
// The following setting is the from-address of the auto-respond email:
$autorespond_from = "ksorman@focusonedesign.ca";
// The following setting is the message of your auto-response email:
$autorespond_contents = "Your Request Form from Focus One Design has been received. Thank you!";
// DynaForm also needs to know how to retrieve the user's email address.
// You must specify the name of the field into which the user will enter
// their email address. For example, if your email form contains an input
// field like "<input type='text' name='Email'>" you would set the
// following setting to "Email".
$autorespond_mailto_field = "Email";
// ###########################################################################
// ###########################################################################
// MAKE SURE DYNAFORM IS NOT BEING LOADED FROM THE URL
if($HTTP_SERVER_VARS['REQUEST_METHOD'] == "GET") {
echo "
<html>
<head><title>Webligo PHP DynaForm is installed correctly.</title></head>
<body>
<font style='font-family: verdana, arial; font-size: 9pt;'>
<b>DynaForm is installed correctly.</b></font><br>
<font style='font-family: verdana, arial; font-size: 8pt;'>
DynaForm Easy PHP Form Mailer was created by <a href='http://www.webligo.com'>Webligo Developments</a>.
</font>
</body></html>
";
exit();
}
// SET VARIABLES
$incoming_fields = array_keys($HTTP_POST_VARS);
$incoming_values = array_values($HTTP_POST_VARS);
if($override == "no") {
$incoming_mailto = @$HTTP_POST_VARS['rec_mailto'];
$incoming_subject = @$HTTP_POST_VARS['rec_subject'];
$incoming_name = @$HTTP_POST_VARS['rec_name'];
$incoming_company = @$HTTP_POST_VARS['comapny'];
$incoming_email = @$HTTP_POST_VARS['rec_email'];
$incoming_telephone = @$HTTP_POST_VARS['rec_telephone'];
$incoming_address = @$HTTP_POST_VARS['rec_address'];
$incoming_website = @$HTTP_POST_VARS['website'];
$incoming_hear = @$HTTP_POST_VARS['rec_hear'];
$incoming_comments = @$HTTP_POST_VARS['rec_comments'];
$incoming_thanks = @$HTTP_POST_VARS['rec_thanks'];
$incoming_error = @$HTTP_POST_VARS['rec_error'];
}
$incoming_mailto_cc = @$HTTP_POST_VARS['opt_mailto_cc'];
$incoming_mailto_bcc = @$HTTP_POST_VARS['opt_mailto_bcc'];
$form_url = @$HTTP_REFERER;
// MAKE SURE DYNAFORM IS BEING RUN FROM THE RIGHT DOMAIN
if($secure_domain_on == "yes") {
$form_url_array = parse_url($form_url);
$form_domain = $form_url_array[host];
if($form_domain != $HTTP_SERVER_VARS[HTTP_HOST]) {
echo "<h2>DynaForm Error - Invalid Domain</h2>
You have accessed DynaForm from an external domain - this is not allowed.<br>
You may only submit forms to a DynaForm file that exists on the same domain name.<br>
If you believe to be receiving this message in error, please refer to your readme.txt file.
<br><br>";
$error = "yes";
}
}
// CHECK IF MAILTO IS SET
if($incoming_mailto == "") {
echo "<h2>DynaForm Error - Missing Field</h2>
Your form located at <a href='$form_url'>$form_url</a> does not work because you forgot to include
the required \"<b>rec_mailto</b>\" field within the form. This field specifies who the email will
be sent to.
<br><br>
This should look like:<br>
<input type=\"hidden\" name=\"rec_mailto\" value=\"youremail@yoursite.com\">
<br><br>
If you are still confused, please refer to the readme.txt for more information and examples.<br><br><br><br>
";
$error = "yes";
}
// CHECK IF SUBJECT IS SET
if($incoming_subject == "") {
echo "<h2>DynaForm Error - Missing Field</h2>
Your form located at <a href='$form_url'>$form_url</a> does not work because you forgot to include
the required \"<b>rec_subject</b>\" field within the form. This field specifies the subject of
the email that will be sent.
<br><br>
This should look like:<br>
<input type=\"hidden\" name=\"rec_subject\" value=\"New DynaForm Email\">
<br><br>
If you are still confused, please refer to the readme.txt for more information and examples.<br><br><br><br>
";
$error = "yes";
}
// CHECK IF THANKS IS SET
if($incoming_thanks == "") {
echo "<h2>DynaForm Error - Missing Field</h2>
Your form located at <a href='$form_url'>$form_url</a> does not work because you forgot to include
the required \"<b>rec_thanks</b>\" field within the form. This field specifies what page the user
will be taken to after they submit the form.
<br><br>
This should look like:<br>
<input type=\"hidden\" name=\"rec_thanks\" value=\"http://www.focusonedesign.ca/thankyou.htm\">
<br><br>
If you are still confused, please refer to the readme.txt for more information and examples.<br><br><br><br>
";
$error = "yes";
}
// CHECK IF IP ADDRESS IS BANNED
if($ban_ip_on == "yes") {
if(strstr($ban_ip_list, $HTTP_SERVER_VARS[REMOTE_ADDR])) {
echo "<h2>DynaForm Error - Banned IP</h2>
You cannot use this form because your IP address has been banned by the administrator.<br>
";
$error = "yes";
}
}
if($error == "yes") {
exit();
}
// SET EMAIL INTRODUCTION
$message = "This email was received from your DynaForm located at $form_url \n\n";
// LOAD EMAIL CONTENTS
for ($i = 0; $i < count($incoming_fields); $i++) {
if($incoming_fields[$i] != "rec_mailto") {
if($incoming_fields[$i] != "rec_subject") {
if($incoming_fields[$i] != "opt_mailto_cc") {
if($incoming_fields[$i] != "opt_mailto_bcc") {
// CHECK FOR REQUIRED FIELDS IF ACTIVATED
if($required_on == "yes") {
$sub = substr($incoming_fields[$i], 0, 2);
if($sub == "r_") {
if($incoming_values[$i] == "" OR !isset($incoming_values[$i]) OR $incoming_values[$i] == " ") {
header("Location: http://www.focusonedesign.ca/oops.htm");
exit();
}}}
// ADD FIELD TO OUTGOING MESSAGE
$message .= "$incoming_fields[$i]:\n$incoming_values[$i]\n\n";
// SET EMAIL FOOTER
$message .= "\n\nThank you for taking the time to fill out the Request Form. I will get back to you as soon as possible";
// CLEAR HEADERS
$headers = "";
// ADD FROM ADDRESS
if($from_address != "") {
$headers .= "From: $from_address\r\n";
}
// CHECK FOR CC OR BCC
if($incoming_mailto_cc != "") {
$headers .= "Cc: $incoming_mailto_cc\r\n";
}
if($incoming_mailto_bcc != "") {
$headers .= "Bcc: $incoming_mailto_bcc\r\n";
}
// SEND EMAIL
mail($incoming_mailto, $incoming_subject, $incoming_name, $incoming_company, $incoming_email,
$incoming_telephone, $incoming_email, $incoming_address, $incoming_website, $incoming_hear,
$incoming_comments, $message, $headers);
// SEND AUTO-RESPONSE IF ACTIVATED
if($autorespond_on == "yes") {
$autorespond_mailto = @$HTTP_POST_VARS[$autorespond_mailto_field];
$autorespond_headers = "From: $autorespond_from";
mail($autorespond_mailto, $autorespond_subject, $autorespond_contents, $autorespond_headers);
}
// FORWARD TO THANK YOU PAGE
header("Location: $incoming_thanks");
?>
| ANYONE WITH IDEAS OR HELP - GREATLY APPRECIATIATED. |
