DaniWeb IT Discussion Community - Motherboards, CPUs and RAM

Does anyone have the MSI P55-GD80 mobod?

ingeborgdot@yah — Sat, 07 Nov 2009 05:51:09 GMT

What is your thought on this board. I have read some good things about it. What is the quality of this MSI board? MSI P55-GD80

computer component

oluscoa — Thu, 05 Nov 2009 20:37:09 GMT

how does computer component communicate with each other. pls i need the full explanation

Ram question?

opethcire316 — Thu, 05 Nov 2009 04:59:28 GMT

Hello all, I'm putting together a cheap computer, here is a couple of the things i have,
a GIGABYTE GA-MA770T-UD3P mobo, AMD Phenom II X2 550 processor, and G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ram.
My question is, I believe that i saw somewhere that the 550 can only do Ram at like 1333, is this right? I don't know where to look to see if this is the case or too much about Ram. Will my setup not run the Ram at 1600? Any help and explanations will be greatly appreciated, thank you.

Bad Gaming Performance.

Mystic-G — Wed, 04 Nov 2009 13:38:37 GMT

Please Read, it is related to this forum section.

System Specs:
CPU: Pentium D (dual core) 3.2Ghz
Video Card: Evga 8800GTS 320MB Superclocked
Ram: Kingston KVR667D2N5/2G (one stick of ram)
Motherboard: Asus P5QL/EPU
Hard Drive: 250GB Western Digital (IDE)
OS: Windows XP Media Center Edition 32bit
PSU: 600w OCZ SilentxStream

I been using this setup for about 2 years now and it ran games just fine.

About 6 weeks ago my old motherboard (Asus P5PL) gave out. I had to buy a new motherboard and ram (my old ram was incompatible with the new motherboard), I also reformatted my hard drive and reinstalled Windows along with replacing them. Now when I play my games (such as Call of Duty 4 and Battlefield 2 titles) they run poorly even on very low or minimum settings. I used to run them at near max settings pretty smoothly before with my old motherboard. I tried changing my video drivers three times now, but nothing's changed.

Specifically what happens while playing Call of Duty titles is the fps will go up (70+ frames per second) if I look away toward a wall or floor, but when I look to where everything is at and all the action it drops pretty badly (30-50 frames per second), even on minimum settings. I run my games at either 1024x768 or 1280x1024 so it shouldn't be straining the video card that badly. But as said, I used to run the games pretty smoothly all the time before at near max settings. Every game has generally not so great frames-per-second compared to my old motherboard.

Side notes:
*DirectX is up-to-date.
*All my drivers are installed.
*CPU temps are 39c at idle, 55c while playing BF2, and 60c while playing CoD4.
*GPU temps are fine
*Windows is a fresh install.
*Not too many apps running in the background.
*Ran chkdsk fine.

Some people said that because I'm running one stick of ram that, that might be the culprit behind the lack luster gaming performance. I had multiple sticks of ram on my previous setup. Could two sticks in dual channel be that much of a performance difference than one stick in single channel. The frequency of the ram module is 667Mhz by the way.

Will Processor work with MoBo

DevC++4.9.9.2 — Wed, 04 Nov 2009 06:40:39 GMT

Hey, im putting together a cheap computer, but i want to make sure the motherboard and processor will work together. (Mostly powerwise like 125v or ect)

Thanks in advance

Here is the build:
Processor:
AMD Athlon 64 X2 6000+ Windsor 3.0GHz 2 x 1MB L2 Cache Socket AM2 125W Dual-Core Processor - OEM
URL:
http://www.newegg.com/Product/Produc...C7B-_-19103772

MotherBoard:
ASUS M3A78-EM AM2+/AM2 AMD 780G HDMI Micro ATX AMD Motherboard - Retail
URL:
http://www.newegg.com/Product/Produc...C6A-_-13131324

Cd/Dvd Drive:
Sony Optiarc Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA DVD/CD Rewritable Drive - OEM
URL:
http://www.newegg.com/Product/Produc...L0A-_-27118030

Power Supply
OCZ StealthXStream OCZ500SXS 500W ATX12V / EPS12V Active PFC Power Supply - Retail
URL:
http://www.newegg.com/Product/Produc...82E16817341012
Hard Drive
Western Digital Caviar Green WD5000AADS 500GB 32MB Cache SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive
URL:
http://www.newegg.com/Product/Produc...82E16822136358

Combo Link HD+PwSup
http://www.newegg.com/Product/ComboD...t=Combo.286864

Case:
Auzentech GMC R-2 Toast Case - Black
URL:
http://www.xoxide.com/auzentech-gmc-...ase-black.html

Reboots when playing games, moving large files, streaming video etc.

kingston — Mon, 02 Nov 2009 13:04:28 GMT

I have a rather annoying problem. My PC is rebooting a lot, without giving any BSODs. This happens when I'm moving large files, when playing certain games and sometimes when streaming videos (although this could be due to other reasons and just coincidence). There are no reboots when I leave the computer alone, and I can surf the web, watch videos on my HD, use Photoshop etc.

I recently replaced my power supply and ram due to the computer not booting at all. I had these reboot problems before this, but they were rather rare. For a week after replacing parts the reboots were also very rare, but now I can reproduce them very easily. E.g. the game Borderlands reboots in the main menu after a few seconds. First it would reboot after an hour into the game, then the time got shorter and shorter and now I can't play it. I've monitored the temps of various components, but can't seem to find anything overheating. The GPU goes to 60C+, but that's hardly fatal. I can however play less hardware-intensive games.

I ran Prime95's in-place large FFTs test and I immediately got a BSOD, but even though I had "automatically restart" on BSODs unchecked, it still rebooted, so I don't know what the BSOD was about.

Any guesses on what could be causing it?

So:
- Computer reboots when moving large files.
- Computer reboots when playing hardware-intensive games.
- Reboots might also be linked to video streaming.
- BSOD when running Prime95.
- Rebooting has become a lot more frequent over time (think of a curve with time on x-axis and reboots on y-axis).

- Recently replaced power supply and RAM, but problems existed before this.
- Cannot see anything unusual in hardware temperatures.

News Story Intel Hot on Flash's Trail

EddieC — Thu, 29 Oct 2009 16:24:18 GMT

While the competition is hard at work on a 100-core processor, Intel this week reported advances in phase-change memory (PCM), a type of non-volatile memory that is seen as a possible next-generation replacement for flash.

In a joint announcement yesterday with Swiss memory maker Numonyx, the companies said they had demonstrated for the first time the ability to "stack multiple layers of PCM arrays within a single die," significantly increasing the space savings and reducing power consumption related to the technology.

Memory cells consist of a storage element and a selector. Several stacked memory cells make a memory array. By stacking PCM-cell arrays, the companies have demonstrated what they call a phase change memory and switch (PCMS), a vertically integrated memory cell. "The ability to layer or stack arrays of PCMS[es] provides the scalability to higher memory densities while maintaining the performance characteristics of PCM, a challenge that is becoming increasingly more difficult to maintain with traditional memory technologies," according to the statement.

At the center of the advance is the Ovonic Threshold Switch (OTS), which in essence is a thin layer of glass that changes its resistive state depending on the level of current being applied to it. Researchers deployed the thin film in a new way, with the "two-terminal OTS as the selector, matching the physical and electrical properties for PCM scaling." With the compatibility of thin-film PCMS, multiple layers of cross point memory arrays are now possible, the report said, giving way to layered arrays that when combined with CMOS circuits, can be used for decoding, sensing and logic functions.

laptop bios resetting(switch error)

blocker — Thu, 29 Oct 2009 01:04:43 GMT

hi guys.. I have successfully dismantled my pentium 2 hitachi yesternight. I wanted to clear the cmos via switching 2 jumpers or via its cmos battery but i dont know what it looks like in a laptop board. Im looking for this word cls, clspwd, pwd, cmos, on the board but i found nothing. Did i fail or forgot something to touch.?

Pls help & Thank you for giving your precious time.

Ram slots...

ctk_satz — Tue, 27 Oct 2009 02:25:04 GMT

Friends i want to know how many Ram slots ll available in normal PC.........
I seached for this in google..... it showed 4..........
but in ma PC i found 1ly 2 slots.............plz do clarify this 4 me...

Bus

ctk_satz — Tue, 27 Oct 2009 02:19:44 GMT

what is the bus connecting mother board with hard disk?

T60 laptop clock is resetting every 1 hour

ithelp — Mon, 26 Oct 2009 17:54:13 GMT

I changed my laptop battery , it is unable to show correct time and every 1 hour the time is reducing by 1 hour .
How do I fix it ?

Motherboard Types?

ryanderson — Sun, 25 Oct 2009 22:25:15 GMT

I've decided to build a new PC, instead of just buying a pre-built. I'm in the process of doing some research to make sure I do it right...the first time. From what I've read so far, it seems to be that the motherboard is the most important decision to make...and to make first. I'm still going to do some more Googling (because I haven't been able to find a good explanation yet) but came across Daniweb, which looks to be a good resource for this question, which is:

Are there different types of motherboards (not just namebrands...but specs, etc.)?
How will I know if it's compatible with all the other components?

So far I'm thinking of going with an Intel Quad Core and an ATI Radeon Video Card as 2 of the main components...but no other specifics/decisions thus far.

need a program

ericssionz — Sun, 25 Oct 2009 20:23:38 GMT

Write a program using the following:

What's a Microcontroller - .bs2
'An active-LOW LED ON P9 (LED1)
'An Active-LOW LED ON P8 (LED2)
'An active-LOW PB ON P0 (PB1)
'Servo ON P12

My Computer can not showing display.

Bhuwaneshwar Pr — Sat, 24 Oct 2009 14:41:59 GMT

When I power on the PC all the thing is happening. CPU fan is running, Hard Disk is vibrating and CD writer is also responding but there is nothing on the the monitor. I reassembled many time the devices. I cleared the BOIS, RAM but nothing is happening. I see that problem not only in my PC usually this problem is happening in many PC but after some time when I reassemble, that PC start working but this time it is not working. So what could be the reason. Please suggest.

Thanks

Can I use Intel processor compitable M/B for AMD processor

Bhuwaneshwar Pr — Sat, 24 Oct 2009 14:26:27 GMT

I want to know that does motherboards are designed for any particular processor. Actually I have an AMD Athlon processor and I am searching for motherboard but in the market it is not available. I want to know that, can Intel processor and AMD processor has same pin configuration.

Foxcon 661fxme boot failure sometimes..

blocker — Fri, 23 Oct 2009 00:33:49 GMT

Good day.!

Maybe some of you guys has encounter this problem. Sometimes when i boot up my Foxcon 661fxme it wont power, sometimes it boot, but now its failure to boot. Ive replace brand new processor (intel celeron 1.8ghz), memory but still no luck at all. Is their any other task i forgot to do with it.?

Pls help guys.

Thank you for giving time..

Compaq presario c300 wont start up

bhavin.patel — Thu, 22 Oct 2009 12:01:12 GMT

Dear Sir,
I wonder if anyone could offer me any help with my laptop.

I was running it in my truck via an inverter ( I have to use cord as wont run on battery)I started the engine with the laptop running, and it immediately turned itself off. Now, when I press the on button, it lights up and the fan starts off for approx 3 seconds then just stops and the on button just flashes. Nothing on the screen and does nothing else if you leave it for a while.

I fear I may have blown something inside it, but any ideas would be greatly appreciated.

Regards,

Bhavin Patel

dell latitude D600 BIOS

uzorp — Thu, 22 Oct 2009 09:07:59 GMT

hi,
i just got a dell d600, the thing is that there is a bios configuration password on it . it can bootup to windows alright but i cant change any thing in the bios setup. it is really anonying as it is making the system perform very poorly.
i have contacted dell but they have declined to help cos i am not the original owner of the machine, i don't know the original owner and i sure did not steal it, i bought it at a second hand computers shop, i do not live in the USA, if not i would have personally taken it to the dell office.
pls if any one has a solution let me knope thanks

pc3200-30330 vs 30440 and RAM size 'mixing'

prsrose — Thu, 22 Oct 2009 02:49:53 GMT

Just recently bought more ram for my powermac g5 - (specs at end of post)

If anything it seems slower when using Final Cut Studio. When I view my activity monitor while rendering etc, it rarely shows a decent amount of RAM being used to process.

My question-- I noticed my newly installed ram is 30440 and the older/original ram is 30330
Is this a problem?

Also, I have the ram installed in pairs- but they are in different sizes.
One 256mb pair (30330)
One 512mb pair (30330)
and one 1gb pair (30440)
Under system profile, it says all dimms are 'ok' and it registers 3 .5 something gigs of ram

I've since taken everything out but the 2 1gb pair to see if it speeds up, so far nothing drastically noticeable. Perhaps a hair faster than when I had the 256's and 512's in there as well.

Please advise/help!
~Jeff

Specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.1)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 3.5 GB
Bus Speed: 1.15 GHz

Help finding RAM slots

Epi23 — Tue, 20 Oct 2009 19:04:06 GMT

In no way am I new at all of this, but I recently drug my dad's old laptop out of storage about a week ago, and I wiped the hard drive and installed Ubuntu on it so I could try it out, but I looked at all his stuff on it and he has like 225MB of RAM on this system, so I took my old RAM chips from my laptop, and was going to put them in this, and well needless to say I cannot find the RAM slots. The type of computer is a..well, I don't even know. All it says on it anywhere is "Ultra". It says that on the top of the screen, and at the bottom of the screen by the keyboard. I've taken this thing apart as far as I could (Some things I couldn't get off) And still no luck. Any help will be much appreciated. Thanks in advance!!

Motherboard?

smith6237 — Sun, 18 Oct 2009 12:39:19 GMT

I'm planning on upgrading my pc, but i wan't to know first what motherboard will support 1 or 2gb of ram ? a good price one.

PC800

Brad W — Sun, 18 Oct 2009 03:26:24 GMT

I need some help in locating this RAM. PC800 64MB 128bit 400/100 RIMM. I am told that this RAM has to come in pairs...is this true?

Approved Cisco Memory

seo mehreen — Fri, 16 Oct 2009 09:54:32 GMT

Approved Cisco Memory are specialists in the supply of competitively priced, 100% compatible Cisco memory upgrades for all Cisco Routers, Switches, Firewalls, Catalyst and Supervisor engines. With
over 12 years experience in the memory industry, we source from the manufacturers that supply
Cisco directly. The difference is we are up to 90% cheaper than Cisco's list price.

Computer overclocking...??help....!!!!

darthsidius — Thu, 15 Oct 2009 05:28:31 GMT

can anyone help me how it is being done??
should it be necessary for my computer to overclock??
what was the advantages and disadvantages??

Need information about ARM "Advanced RISC Machine", please?

Q8iEnG — Tue, 13 Oct 2009 12:32:06 GMT

Hi mates..

My professor asked to do research on the internet for this "ARM, Advanced RISC Machine" writing about its Addressing modes, Class type, instruction set, operands size...etc.

Can anyone help me please to get the right site that will provide me with all information needed?

Thanks

motherboard problems

wardoon — Mon, 12 Oct 2009 08:34:17 GMT

hi every body
i have laptop everex stepnote NC1500
so it's turn on but the monitor does not working
i checked every thing and it's working like hard drive +rams + processor >>
and the LCD MONITOR does not broke or damage
i tried to connect the external display adaptor to another monitor
and it does not work
so i'm sure it's from the motherboard does not connect power to the monitor
so help me plz to fix the motherboard

presario help please!

airbag — Sun, 11 Oct 2009 13:31:31 GMT

i have a compaq laptop and getting a warning,it is saying the presario is 90% full and my local disc has alot of space,what is the presario disc?
my quesion is how do i free up the the spcae on the presario drive?

Physical Dump Memory

shashank1692 — Sun, 11 Oct 2009 11:08:48 GMT

I have a core 2 duo 2.8 Ghz processor.But my computer runs slow.Without running any programs It shows around 50% CPU usage and shows that 94% of core1 is being used.
Whenever i insert pendrive after some time Blue screen comes and displays Physical Dump Memory...the pc gets restarted and then it fails to detect one my hard drives and hence fails to boot.
After restarting 2-3 times,it resume normally if luck prevails.And when the computer starts, it makes lot of noise as if coming from the chasis fan.

Cheap but good flash memory?

sachin_mishra — Tue, 06 Oct 2009 23:31:46 GMT

Where do you recommend one can get flash memory? It's usually hard to find... if you do get to find a few, they over price it!

Although i got an good Site MEMORYX.NET but did you.....? share your knowledge here

Thanks!

PC hardware and software compatibilities

plongx211 — Tue, 06 Oct 2009 09:45:02 GMT

my problem is this:
Assemble your own PC with the compatible hardware; (with picture and steps)
could you give me the answer as soon as possible, thank you...

PC hardware and software compatibilities

plongx211 — Tue, 06 Oct 2009 09:42:41 GMT

my problem is this:
Assemble your own PC with the compatible hardware; (with picture and steps)[/COLOR]
could you give me the answer as soon as possible, thank you...

Removing AMD CPU

mnewsome — Sat, 03 Oct 2009 21:47:02 GMT

I have the AMD Athlon K100MNR53B. Forgotten how to remove it. Looking for pictoral guidance. Much thanks for any assistance.

Mouse, Keyboard and Monitor problem

Kiross — Sat, 03 Oct 2009 17:37:09 GMT

Hey, im having a problem with my mouse, keyboard and monitor. Now due to me thinking at first its a problem with the motherboard i decided to make this thread here.

The problem specifically is simply all three dont work, well the monitor does but its left in standby so the screen is just black but i know its on because the power light, which is usally blue, is orange.

I tried un-plugging the keyboard and plugging it back in, the scroll/num/caps lock lights flick on and then off and thats all i get, which tells me it cant be a power issue same with the monitor, that cant be a power issue either.

The mouse just doesnt work at all.

Can anyone shed some light on this?
I cant do anything other than turn my comp on and off at the moment (im writing this from a different comp).

Any help would be much appretiated!

IBM T22 erratic startup

richard06877 — Thu, 01 Oct 2009 17:35:16 GMT

I have an IBM T22 that I've had for a few years; lately it has been acting up. I'm running Win2K 512 Mb Ram. When I put the machine on either Standby or Hibernate, I'll have a tough time waking the thing up again. When I push the "Fn" button (if on Standby) the half moon "Sleep" indicator will go out, and it will behave as if it was turned completely off. Before it had a problem, the "Fn" key would wake it up fine. When I put it into Hibernate, then attempt a wakeup, it will just flash the HDD light and the AC power indicator alternately. Weird. The only way to get it to function (sometimes) is to unplug the battery, wait (sometimes a day or more) then put the battery back in and try it. It has been less and less willing to start up, so the question is: is it the motherboard, or what? If so, how expensive and difficult is it to replace one on this machine? Where could I find one cheap? Many thanks for any suggestions. I'd just like to get this up reliably and give it to my 8 year old for his "destruction" :-)

New motherboard and cpu no display

xandermedia — Wed, 30 Sep 2009 23:13:35 GMT

Hello,
I just recently bought a new mobo, cpu, ram, and power supply. I installed them into my old compac box and started it; when i hit the power button the fan turns on, the leds light up and i can hear the drives going, but i get no display on the monitor. I know the monitor works cause i've used it before, any help would be great.

Parts:
m/b : Biostar TA760G M2+
cpu: AMD anthlon X2 64 bit processor
pwr: 480 w

thanx.

video problem on sony vaio laptop

ArthurDent — Tue, 29 Sep 2009 00:07:57 GMT

Sony Vaio VGN B100B
Intel Centrino
1.6 GHz Pentium M 725
855GME chipset
1GB + 512MB RAM DDR333

Some days back, my Sony Vaio laptop (model VGN B100B) screen blanked out all of a sudden.

Now the laptop does not boot though it gets power. On power up, the DVD drive spins and the indicator lights for HDD, power and wireless go on; but nothing shows on screen. Nothing shows even when an external monitor is connected.

The hard drive is fine - I removed it and backed up the files.

I tried disconnecting the power cord, removing the battery and holding down the power switch for a minute as has been suggested on some other threads (eg: http://www.daniweb.com/forums/thread41145.html ). But nothing showed up on the screen after restoring the power.

I suspect the video chip or the entire motherboard is fried.

Any suggestions on how to isolate the issue and if it is indeed the video, where to get a new chip?

Thanks!

Cpu hang and loss of network connection

Vatikan666 — Sun, 27 Sep 2009 08:32:10 GMT

Hi there, i do have a weird problem here pls anyone can help me i really appreciate it, i do have an internet cafe shop, and when one of my client hang up all of my network connection is gone so i unplugged the lan cable and turn off the CPU the one that hangs up and my network connection is up again, weird isn't? any one encounter this thing? pls help. thx..

My pc wont start

Vatikan666 — Wed, 23 Sep 2009 05:35:22 GMT

Hi there, i need help here, cuz my pc wont start anymore and i tried all the things that i know to fix it but still nothing. i did change the PSU, memory, processor and HD drive and still its dead, anyone can give some suggestion? i really appreciate it, THX. good day

Mobo Keeps on Restarting

watcher101 — Tue, 22 Sep 2009 00:28:54 GMT

Hi, Ive got a problem with my friends mobo. He requested me check it because the technician keeps on telling him to buy this things yet his pc still restarts once he returns the unit back home. By the way the mobo is Gigabyte GA-8I865GME-775 (http://www.gigabyte.ph/Products/Moth...ProductID=2223). Also, the technician suggested that he should change his PSU to 500W... and so he did.

Last night I brought my Unit with thw Socket 775 then tested it there. I've already place his processor, Memory and HDD into my unit. So I can Format his HDD. After formatting his HDD already work. But after testing my HDD into his mobo and power supply it restarted. Also, after testing his processor, mem & HDD into my unit I've returned his parts into his unit. Still, his unit keeps on restarting.

Jack in the back of the computer

Devour — Mon, 21 Sep 2009 20:45:46 GMT

Hello, sorry if this the the wrong section, as I didn't see any others that would fit the description.

But the jack for the local area connection in my computer does not work, usually when you plug in a cable it lights up, it doesn't. I've tried different cables, and system restored but none of that seems to be working. Any trouble shootings to do?

computer hangs on ASUS start screen

arje81 — Mon, 21 Sep 2009 18:39:18 GMT

Motherboard - ASUSTek A8n-VM, rev.1.xx
Bios - American Megatrends 0403
Windows XP Home, SP3
This has worked fine for several years, but now hangs at the ASUS screen on every start, instead of proceeding with the full boot. Pressing there brings up the BIOS screen, which hangs at "auto-detecting device #01. Several hard restarts later, the BIOS will roll past #01 to #03, then automatically brings up BIOS Setup Utility. Pressing there brings up a box asking if I wish to "Discard configuration changes and exit now?" Pressing OK there initiates the normal boot process, and normal computer function. I installed a new motherboard battery, with no benefit.
Any suggestions?, please.

restrict RAM usage

sunki — Mon, 21 Sep 2009 18:11:08 GMT

Hi,

Is there any way to restrict the usage of memory of RAM used in the system?
i.e. If i have a 1GB RAM used in a computer, can i restrict the OS to use only a part of the RAM (may be 256MB) and remaining as inaccessible, so that the computer shows only RAM capacity as 256MB.
Please suggest me whether this is possible??

Hard Drive/Motherboard Swap

Tom9489 — Mon, 21 Sep 2009 17:49:43 GMT

I have two computers, an HP and a Compaq. The HP is older with a slower CPU and has much more fan noise. The problem is that the HP has a lot of financial data on it that I want to preserve. Both computers are on Windows XP, SP2.

Can I just swap the hard drive from the HP to the Compaq? I know that I'll have to go into the BIOS so the Compaq will be set up properly for the HP hard drive. Is there anything else?

Thanks.

Help me assemble the badest desktop pc ever between Intel i7965 and AMD 965

slasher73 — Sun, 20 Sep 2009 07:36:19 GMT

Hello guys!! Good day to all!! Ive been saving for the past year in order to build my dream PC mods ever . So kindly help my assemble the specs that i ever dream off. My overview is to put 2SLI, 16GB RAM DDR3, sound card, liquid cooling system, mobo( eva/ asus), what casing will i prefare, 2TB HDD, 1TB SSD, X3 PSU, DVD/Blueray burner, casing and lastly CPU ( AMD 965 BLACK EDITION/ i7 INTEL 965). im looking forward to it . Kindly help me so i cant make a mistake doing it by myself.

Thanks a lot DANIWEB

Download User Manual

rovil09 — Sat, 19 Sep 2009 21:50:45 GMT

i want link download user manual motherboard sy-i5n73-lr?
thank you

Dell OptiPlex GX280 RAM information

johnathon007 — Fri, 18 Sep 2009 05:58:39 GMT

I have a Dell OptiPlex GX280 and it only has 516Mb of RAM and i want to get at least 2Gb and im just wondering what the max speed supported is. It has pc2-3200 and i would like to put in pc2-6400 but im not able to find out if its supported.

Troublesome RAM

Danniboy — Thu, 17 Sep 2009 22:07:52 GMT

Hi Guys,

I recently started having freeze up issues with my ram (half of it anyway)

I immediately took out the modules and found that a pair of them are at fault

So, I proceeded to send them back to corsair, Got an RMA and all the rest of it...

Then I got my replacements back, but guess what - the same problem!

I am at a loss as to why this is happening..!

Its 8GB i had in my system, and 4GB (2x2GB) pair of modules is the problem ram.

so currently im on 4GB.

My first thoughts when the replacement ram also had an issue, was that perhaps the RAM slot is where the problem lies, on the Motherboard, but after having moved the OK Ram in to those slots, its still, absolutely fine.

The details of my system and ram are:

RAM: Corsair XMS2 6400 800Mhz

Motherboard: Asus P5B Wireless solo AP

CPU: Intel Duo Core E6600 2.4Ghz

Hope someone can help!

Many thanks in advance.

Why Intel i7 said to be better than Quad Core

thisara — Wed, 16 Sep 2009 21:11:24 GMT

Hi

I was told by a sales guy that Intel i7 is better than Intel Quad Core. He said it is just not double the cores but increase of internal cache, etc...

Could you give me a better explanation pls in terms of performance over price?

Thisara
SNIP

Intel DP35DP motherboard memory problem

Mike R — Tue, 15 Sep 2009 00:04:08 GMT

I put togther a computer with the Intel DP35DP motherboard. Had it running with two separate 1gb 800mhz memory chips. I bought 2 sets and I was only able to get 2 of the 4 to work. Memory had a lifetime warranty so I sent all 4 back in. The company OCZ sent me supposedly 2 matched pairs. Put 1 1gb strip in computer worked. Tried 2 -no go, tried 4 no go. Call Crucial an bought 2 2gb that supposedly gauranteed to work No go. Any suggestions?

Tried upgrading memory, now monitor is blank.

jengland — Mon, 14 Sep 2009 19:28:37 GMT

Ugggghhhh! Tried upgrading my Dell Dimension 8100 from 128 MB to 1Gb (2x512 cards) Got the cards, put them in, got 3 long beeps, no monitor screen and 2 orange lights (instead of green) under my keyboard plug in. Oh, now my old memory doesn't work either. After this happened, looked at the cards and realized they shipped ECC cards for my non-ECC motherboard. I hear that ECC can work with non-ECC but, obviously, it didn't work in my case. Should I exchange for the non-ECC cards? Did I know just enough about computers to zap mine? I'm at a loss right now. Please advise.

xp installition in laptop

Muhammad shah — Sun, 13 Sep 2009 15:33:03 GMT

when we are install vista in laptop it has succesfuly install when we install window xp we have received error

difference in architecture of dual core and core-2-duo processor

adcodingmaster — Sat, 12 Sep 2009 13:13:31 GMT

hi

can any one tell me the difference in architecture of dual core and core-2-duo processor? which one is better?
plz reply to both the questions.

thnx

system speed

vivek007jain — Sat, 12 Sep 2009 04:45:49 GMT

dear tema how can increase systen speed
i ahve try to increase virtual memoyr
delete temp. files
remove unwanted program in control paneel
stop unwanted services in stsrtup tab
disk defreg.
disk cleanup
but no effected

Need help 2 buy cpu, mobo, ram

acmevishal — Fri, 11 Sep 2009 16:08:15 GMT

hi to all
i need to buy 64 bit motherboard and its compatable processor and 4 gb ram ddr 3.
can anybody tell me the product name(model number) for upper mention confrigation preferbly intel

thanx i need it urgent
waiting for response

regards
vishal sharma

I need help no signal????

netokenny — Thu, 10 Sep 2009 21:57:43 GMT

Im not hi tech with computers but i know fr sure my computer is working lol my computer beeps 1 time and when it turns on sometimes the mouse doesnt work or the keyboard or sometimes it just says no signal i ahve an acer monitor and my cpu is an intel pentium4 and there is a button on the bottom of my power button that i pressed idk what it is ikicked it today and it started and hit the monitor and it started up fine does anyone know the problem

processor over heating

engeswaqar — Tue, 08 Sep 2009 19:37:37 GMT

i have intel pentium4 3.0 ghz processor and motherboard d8945gccr my processor temp goes to 102c is it wrong for my machine whats is the problem is my processor fan goes wrong or my biose goes wrong tell me plz

power button press 1 more

abu taher — Tue, 08 Sep 2009 01:49:59 GMT

when I press my power button 3 or 4 time (on off) or some time more then display show in monitor. when I press 1st time then the pc start but no display show in monitor. when I off it and then again on it ( 3 or 4 time I did it) then display show. but pc not start normally. it show a display like:
press F1 to run setup
prss F2 to start default operating system
and show with other more thing.
when I press F2 then windows start normally. now what I need to do?

Big Dilemma on upgrading RAM in a PC HP m7350la

javierjan — Fri, 04 Sep 2009 03:10:34 GMT

Here is dilemma I`m facing with my PC which is a HP m7350la model. I feel like upgrading its RAM for the new Windows operating system coming, Windows 7, and also making it more efficient.

I read in the product configuration of this specific model that(http://h10025.www1.hp.com/ewfrf/wc/d...duct=1838346):

Memory
Component Attributes
Memory Installed 1 GB (2 x 512)
Maximum allowed 4 GB* (4 x 1 GB) requires the replacement of the installed 512 MB DIMMs
*Actual available memory may be less
Speed supported PC2-4200 MB/sec
Type 240 pin, DDR2 SDRAM
DIMM slots Four
Open DIMM slots Two

But the manual for Kingston memory says that (http://www.kingston.com/newtech/ddr2/default.asp):

DDR2 speeds launched in volume in 2004 include 400MHz and 533MHz DDR2. 667MHz DDR2 launched in April 2005. DDR2 is expected to be the dominant memory technology in the second half of 2005 and become the mainstream memory technology through 2007.

I`m all confused now. Any feedback, suggestions, comments are welcome.

numerical computing

kitjo — Wed, 02 Sep 2009 17:51:57 GMT

i was given an assignmen to make a programme that solve simultaneous equations using c compilers but am still failing to finish it can any one help me do

Monitor display

kitjo — Sun, 30 Aug 2009 18:07:02 GMT

I have two acer mother boads and one which i dont know its type
if i put them in power the fan runs well but there is no dispaly at all what should i do i thin i need some technical advise than you

Samsung ram vs Micron Technology Ram??

tsubasa — Sun, 30 Aug 2009 07:27:57 GMT

Hello,

I just bought 2 samsung 512mb ram (pc2100, sodimm) on ebay but when i received the rams it doesn't say anywhere that they are samsung rams. So when i asked the seller he says that if i didn't receive samsung rams then it means that it's stock was over and i was sent a Micron technology ram instead and he also says MT rams are among the best out there.

But how do i know if i truely receive an MT ram and not some fake ones? Is MT ram better than a samsung one??

Should i report him to ebay?

boot problems

siddious — Sun, 23 Aug 2009 11:18:53 GMT

i have a hp pavillion a1000. it had always worked fine until one day i powered it on and the button stuck in and it promptly powered off again. i have since fixed the button but when i power on the light on the button stayed orange instead of turning blue, the fan spins but nothing happens. please help.

Processor fan turns off and on again NO DISPLAY HELP.

trixrodson11 — Sun, 23 Aug 2009 04:53:30 GMT

I have encounter the same problem lately. I have put a RAM w/o turning off the Unit. then the Unit get Hanged up. and when i turn on the processors fan turn on then turns off and on again... but theres no display. Help Pls.

overclocking recommendations? Pulease!

cbusen — Sat, 22 Aug 2009 06:09:13 GMT

i'm going to overclock my Intel Core Duo 3.0, apparently you can get it to 3.6 without breaking a sweat. i already have five fans running and its well ventilated but i need some settings for the BIOS, the motherboard is a ASUS P5Q-E, i'm running windows XP Pro, SP3, 3MB RAM, evidently any more is useless so i now have all the slots and all the cards for 8MB RAM but i can't use it. But i would like some parameters for the bios cpu settings. any suggestions would be awesome, thanks

installing motherboard, nothing loads on monitor

sassenach — Fri, 21 Aug 2009 11:15:29 GMT

hi, i just installed a new motherboard GA-G31M-ES2L.

1. I can't hear any beeps coming from the motherboard speakers. I didn't see a wire called "speakers", but I do have a wire called "spkout l" and "spkout r" which i connected to the Front Panel Audio pins.

2. After clicking the power button on the case, I see the CPU & PS fans working, which I guess it means the motherboard words, BUT my screen doesn't seem to load. Meaning I don't see any data on the screen.

What am I doing wrong?

thanks

AMD athlon 64 X2 7750+ and ECS A740GM-M

jet_dator — Fri, 21 Aug 2009 04:53:01 GMT

AMD athlon 64 X2 7750+ (2.7 Ghz and 3 MB L2+L3 cache), ECS A740GM-M motherborad, 2GB PQI DDR2 800, GeForce9500GT, 500W PS my computer doesnt boot. the monitor displays nothing. what's wrong? help me please. thanks.

upgrading a dell laptop

jacwat — Mon, 17 Aug 2009 18:14:03 GMT

Hi
I wonder if anyone can help. I have a Dell Inspiron 7500 with an Intel Pentium 3 processor, 601 MHZ. 128mb of RAM and Windows XP Professional. I bought this cheaply recently on EBAY just as a project to play around with. I have never worked on a laptop before so I am very new to this.
The laptop works well and is in good condition considering its age. It hasn’t been online for a few years and so has not been receiving Windows updates and looks really outdated. I haven’t tried getting it online yet. There is a faint wavery line running down the centre of the screen when it’s on and wonder if this is to do with the screen or the graphics? The screen is definitely not cracked.
I would like to know how I could improve it to the maximum possible. What processor if any, can I put in? How much memory can I go up to? Should I put in a new Windows XP if it will take it? What do I need to have a wireless connection to the desktop set up I have? Is there anything else I could do to make it good?
I would love to do this. Sorry for posing such amateur questions and thank you in advance to anyone who is willing to help me. (Simple terms please!)
Regards, Jackie

Want to add more RAM

preston326 — Mon, 17 Aug 2009 15:03:56 GMT

Hello,
I want to upgrade my old PC by adding more RAM (256 or 521). The problem is that I'm newb at hardware and stuff. I know there are many types of RAMs DDR, DDR2 and what not so which type should I buy?
Also, I currently have single chip with 512MB. If I incert lets say 256 next to it will it work, or does it has to be 512 like the first one?
There is my system report : http://testhst.puslapiai.lt/bu/Report.htm
Thanks

Ram not working

kavehh — Sat, 15 Aug 2009 23:36:37 GMT

Hi everyone
I have a INSPIRON | 510m.
my memory was
x2 256Mb DDR-333MHz-CL 2.5 PC 2700U-2533-0-A0

i bought 2x 1Gb Samsung PC2700S-25331-z DDR 2700 CL 2.5

i changed the rams,the windows started up,everythings were fine suddenly it restarted with a blue screen and it couldnt boot up the windows,i removed one of them it worked. i changed it with other one into same slot, but it didnt work. one of them is not working on my system no matter which slot.
but it works fine in other laptop.
can anyone help with this issue.i dont think the problem is with ram as barely they are faulty.

cpu and video encoding

slo_byrne — Sat, 15 Aug 2009 21:45:01 GMT

Hello folks,
I need some advice. Looking to upgrade my cpu, mobo and ram and I'm starting with the processor as it's the most important item to me. I'm steering away from the extremes and i7's due to limited funds. Was thinking possibly lower end quad core or upper level dual core [4 to 6mb. of cache] The more I read, the more confusing the process becomes. So, what I'm looking for is some information as to just what type of processor specs [or brand & model] should I be aware of as they relate to video encoding. I have been using an old AMD Athlon64 x2 3800+ 2.0 for 3 1/2 years and the encoding time and heat levels [50C] are unexceptable as I'm doing more of this type of work. Also, any thoughts or ideas about cpu/motherboard combinations would be greatly appricated as well.
Thank you for any and all info and advice.
Joe

CPU and RAM not running at rated speed

Dougie — Sat, 15 Aug 2009 08:54:03 GMT

My Mobo is an Asus P5B Deluxe, Processor is a Core 2 Duo E6600 and RAM is dual channel OCZP800R22GK. This computer has been running for 1 1/2 years without a glitch. But I recently downloaded CPU-Z and it's telling me that my 800 mhz memeory's bus speed is presently running at only 400 mhz and the CPU's bus speed is 266.7 and it's rated FSB speed is 1066.7

Anyone have any idea as to why this is happening or am I missing something.

My Mobo's bios version is American Megatrends 0614.

How i can repair my RAM?

syedabdulsamad — Thu, 13 Aug 2009 16:02:53 GMT

Hi

Can anyone tell me please How i can repair my RAM.

Thanks.

Motherboard Compatibility Issue

watcher101 — Tue, 11 Aug 2009 09:28:34 GMT

Hi Im Phil, got some problem here. I've got a processor which is quite old.. purchased last 2002. Intel P4 2.0G but the problem is I have to change my m/board and I have a compatibility issue before buying a m/board. Is this board ok for my processor? Gigabyte GA-G31M-ES2C iG31A/V/L/DDR2 800/4 SATA. Also, I have added here the exact board on gigabytes' site... http://www.gigabyte.com.tw/Products/...e=GA-G31M-ES2C...

please someone help me with my prob... also if you have any suggestion on what m/board I can use beside the model i've posted here... thanks in advance...