i would first check for a bridged connection on the desktop. Remove the bridge if it contains a 1394 adapter.

can you ping the Desktop from the laptop (vice versa)?

can you ping the default...

I got you...

copy this into notepad, save as netfix.reg and run it.


Windows Registry Editor Version 5.00

;Issue this addresses: when one PC will "see" the other PC(s), but give an...

i would reinstall the NIC drivers on your desktop, update the firmware in your router, and re-run the network setup wizard. You'd be suprised what that can fix.

go get the norton removal tool and NOD32, maybe treat yourself to a little kerio firewall, you'll be fine.

try it and let us know :)

This baffles me.

I'ts like it locked down all the seperate segments to protect the DMZ addresses.

will none of the PC's connect to the Internet?

will just 1 of the PC's Connect to the internet?

"I have no idea what's going on!"
~Towlie

Not to worry. This is a common socket error. If not, worst case scenario is replacing some software.

first get the laptop and download Winsock (http://www.tacktech.com/display.cfm?ttid=257)...

I've always found it impossible to file share accross a bridged connection. Something about not being able to fileshare accross Internet Conection Sharing going all the way back to win 9x.

you could just set the power profile of their computer to turn off LAN connections when it goes to standby, then set standby @10 minutes.

In theory, yes, it can work. In practice, the WRE54Gv1-3 sucks for many reasons.

That being said, I'm not just here to bash your stuff. Try connecting the router and just one (the v3) range...

but first, replace the drivers, you never know...

spyware probably took it out. This should fix it. I keep it on a flash drive...

LSP fix (http://cexx.org/lspfix.htm)

sorry, put this at the top "Windows Registry Editor Version 5.00"

reset the router.

if you don't see anything change then run ipconfig.

surf to the default gateway's (your router) ip address in your browser. check to make sure DHCP is enabled, and there...

"What we got here is, a FAILURE, to communicate..."
Boss Hog, "Cool Hand Luke" 1967

1. you are connected. to your router
2. you are not connected. to the internet. (maybe)
3. Reset the...

pens and paper come to mind...

from what I understand of it, you need to install a patched driver to put your card into promiscuous mode. once in prmsc. mode, as long as kismet supports your drivers, you can packet sniff to your...

so it did KILL your CMOS? and here i thought it just re-wrote checksum headers...

NOD32 (http://navendugoyal.phpnet.us/wordpress/index.php/2007/02/23/antivirus-review-nod-32/) all the way!

Will the computer load in safe mode? If so, download the MoveEx program from this site http://www.jsifaq.com/SF/Tips/Tip.aspx?id=5378 (http://www.jsifaq.com/SF/Tips/Tip.aspx?id=5378) and unzip it...

not only that, but if you disable the User Access Restrictions (you are being annoyed all the time... cancel or allow) you won't be able to install much because it assumes you want to cancel. also...

and yes, you will have to format the drive to install XP, there is no downgrade option I am aware of.

this sounds more like a RAM, VideoCard, or HDD issue more than anything else

consider pulling your second stick of RAM (the one furthest from the CPU/Heatsink) first and reboot, then if it still...

I think this is totally up to your DNS. check with your DNS host and see if you can set a port to forward to as well as the IP (which you have already done.)

you could also setup port forwarding...

seems right, but im far from an MCSE.
I can however email you some PDFs that may help if you PM me.

go to run... type in cmd, click ok.
type ipconfig and press enter.
look at the # to the right of Default gateway.
type your "default gateway" number into the address bar in your web browser.
it...

take your PC to the geeksquad and be all WTF?!?!

they will look and tell you for free and then try to install a card for like a gazillion dollars.

or run adia32 or everest or even cpuid,...

i have both. get a wii.
XBOX = Halo3
PS3 = Linux support ond insane graphics
wii = PARTY TIME!!!! (better while drinking...)

or run kill CMOS if you can boot from a CD.

KILL CMOS (http://www.softpedia.com/get/System/System-Miscellaneous/KILLCMOS.shtml)

So in the BIOS is there no "boot from USB" option?

it could be that there is an issue with the hardware, try installing linux on the HDD and booting from that.

use NOD32 in safe mode, then run it in normal mode. then sweep for Spyware using latest greatist Ad Aware 07. links included...

Nod32 (http://www.eset.com/download/index.php)
AA07...

correct me if i'm wrong here...

dell likes to sometimes install 1 HDD using a proprietary software RAID BIOS... this will confuse ghost. So, maybe new Motherboard = new BIOS settings.

you could check the manual for whatever keystroke you need... or you could clear the CMOS using a jumper on the motherboard (usually J6), it may be that the BIOSguard is set using a jumper and all...

in the mean time my brother once got a viruse that deleted all his file associations and permissions and he could only launch .exe's and open folders/drives/etc... by R click and selecting Run as......

I've been looking into it myself trying to decide b/t CCNA and MCSA/MCSE...
The easy answer is get both. it looks like the first one to get will be determined by what areas intrest you more,...

I have, i generally stems from either firmware issues with WPA security or more commonly old driver issues on the client side of the equation.

but, i will assume all the drivers and firmware are...

you could use a third party tool like a linux rescue disk wuth Qparted or Fdisk even to reformat the HDD and knock out Vista.

you probably just blocked port 80 while installing a firewall or router... have you tried to ping your website from your afflicted PC by ip address? what about pinging by URL?

the mshome workgroup will only allow you to "see" other computers and their shared folders, printers, etc... it won't create a new folder or in any other way change the files or folders as they...