I have a flat screen HP vf15 that I fixed, I have been using My gateway VX720. Question is, which is better. I would be loosing some size going with the flat screen, but any thing for speed and...

Right click on my computer and read there, it will tell you 64 bit, or if it says nothing about it, then it is 32 bit.

I have two adapters in my machine on a ASUS mother board, and I have had the two adapters bridged. I have the latest drivers and all the easy stuff, but one of my adapters will say, "A network cable...

The program is not in the add or remove programs list and none of the uninstaller programs are detecting it.

OMG,,,, This needs to post some where so it can be used educationally, if such a word,,,,


[B][I][U]Dual Core Not Showing Up in task manager or third party programs[B][I][U]

Option #1 - Hal /...

I am so Frustrated,,, and my thoughts exactly!!! Thanks Bro!!!!!
Just be without it for a few is all!!!! Much thanks!

Ok,,, oops forgot pic!! sorry.
It says " an active X control on this page is unsafe, your current security settings prohibits running unsafe controls on this page"???
The settings are still at...

Crunchie,
I was making sure that I have checked all possabilities before doing the extreme, and when I started the trouble shooter from device manager, processor, then properties, I got the warning...

LOL,,,, OK, Until I return with News of some kind,,,, Thanks a lot!!!!!

Crunchie,
Last thing before I do this,,,, Do I need to uninstall all of my mother board drivers and processor drivers before repairing, or just go ahead and do the repair and let windows sort it...

Yes it is being recognized, every where but third party programs and in the task manager. They all report single.

Will I loose all my stuff doing a repair?

Ok,,,, Here is a pic of core temp Crunchie.
I had went back into device manager and clicked the processor key and my two processors are listed separately. If I go to properties of each, it says,...

Crunchie,
I would like to say I am sorry for reading to fast and not paying attention to your post. In Device manager under processors it shows two processors, and shows both to be working. I am ...

My file reads this, "multi(0)disk(0)rdisk(2)partition(1)\WINDOWS="My Bad Ass Machine" /fastdetect /NoExecute=OptOut"
should it not say optin instead of optout?

when i CLICK ON EITHER LINE OF CPU USAGE, IT JUST ENLARGES IT.

There is not an option to choose one or two graphs. Just has the one, "show one graph per CPU", and it is selected. You think I got a bad one?
Also when i CLICK ON EITHER LINE OF CPU USAGE, IT JUST...

Sorry to be confusing, but if it says, "use one graph per CPU', then what I get out of it is that per CPU in this case two, there should be two graphs. I could be wrong. I just hate to send my mother...

On the view options in task manager>Performance>View Options>Cpu History, it says "Use one graph per CPU".
So Maybe I have bad Core?

Sorry about the thumbnail, Hope this is better.

It is showing two processors on the left top in the pic I posted, but the graph to the right top is set to "only use one graph for both Processors". Thanks for the help.

Wow, Ok, It is definitely running two, Just using one graph. So it is with the program I am assuming. Thanks a lot for the help!!!!

I have an M2n-SLI Deluxe motherboard w/ AMD 64 X2 +6000 processors. I updated my bios from the suggestions of ASUS and AMD technical, all went fine except when I run my "Ableton Live" recording...

Yes Caperjack, I deserved that, and never figured I would answer the only fix to myself. I owe it to Daniweb for me to take the time to help others as a kind of trade off for the help I have...

Go to properties, advanced settings, turn hard war ecceleration down until screen goes too 800x600, goto monitor properties, make sure your monitor type is chosen

I need to run a new registry cleaner I bought because(Laptop) cpu will not go on line, but in safe mode, the screen is set to 640x480 and when I run the program, I can do everything but click the fix...

I have a program that is not in add/remove programs that is in control panel called "Paperport One Touch". It was a scanner and I do not use it anymore, but I can not delete the program. Any clues?

Thank you, Your advice helped alot!!!

I have purchased a wireless network card for my Laptop, "linksys 2.4ghz wireless g with srx
model: wpc54gx". I am confused which router to buy. What do I need to purchase? I have looked at this one,...

WOW,,, I did it.

Here's how!!!!
If you are getting an error message for missing MAXKERNL.dll, you will need all 5 of these files. Copy them into the following folders
c \paprport

c \Windows...

My mom give me this scanner, Visioneer One Touch 5300 usb, and the cd that came with it is win 98. Without using cd I plugged it in and used my subcription to driver guide.com to find the driver, it...

Gerbil,
before I read your post, you must have read my mind, I just used a little bit of elimination of elements to figure it out.

([boot loader]
timeout=4...

O.K. Bro, this is what I got,,,,, I followed everything you said, and I set hard drive back to first boot, cdrom second, system boots and I get a long pharagraph saying canot load from the device,...

yes, good night, you are a geniuse!!!!!! Thank you so much!!!

ok, followed to a "t" but I cant make disk(1) sillybilly's storage, unactive, I did however make active my "E" drive but have not restarted yet,,,, a little nervouse,,,lol.

No pata drives, disk (0) and disk (1) are regular hard drives ata/ide, and the disk (2) is sata. disk (3) is an internal ata/ide that i use as external in a usb converter that I can turn on and off....

ok, before I change this, I do not know why system and boot got seperated, the ethan miles drive is a hard drive for storage for my recording studio only, can I put boot and system on the system...

goto folder options click file options and look for .exe type file and click " to change this settings" button.

have you tried to goto control panel and then mouse settings and make sure they are set to default?

right click on desk top, select properties, then desktop, choose none, then choose screen saver and choose none, then choose appearence and change to something other than what your using. if that...

Make sure that the hard drive is partitioned. put in the xp cd and boot from disk, select repair, then when in repair mode, type "chkdsk /p /r" without quotes. if thats not it, boot from cd select...