here is 1st tip for u:

seprate out the inputs,output,calclution(processing) and decision things from ur problem statement then place in right place and check it from start to end.


make ur...

1st u should try..let us know ur effort..we will help u for sure

i will prefer to make local server...xD

sry 4 late rply.

i have run tracert and results are in attched file

wats rip please detail explenation

IP is not assigned to u by network server or if manual IP is required then ask the provider to tell u which IP is needed then enter in TCP/IP properties

Search google , wikipedia etc

Java is good for that try to search for it.

Try these links:

www.icesoft.com/products/deployment2.html
...

Goto device manager detect the new hardware from tools given above or

there could b three things

i- Change the Slot of NIC

ii- Press ALT+Ctrl+del if it does not shows task manager then virus...

Routing can b done through software such as routing servers Such as kerio etc.

ii-Bridge the network but i am not sure the internet will work cause of ip range

I havnt use this but i know this kind of probl. only accurs in two conditions:

i-U r Inserting wrong syntax
ii- Console Settings are not properly set for this...etc

I didnt understand Tracert to 192.***
Please Explain

Results shown by whatismyip.com
"Your IP Is 204.15.5.12, 203.101.182.99"

Thanx

192.168.0.10 is assigned by DHCP server on my Wifi NIC and service provider is using Broad band for downlink and static ip dual Dialup for uplink.

He is using Kerio Routing firewall

Are u...

MY IP IS 192.168.0.10 ON WIFI NIC AND IP of AP is 192.168.0.2 and DHCP server IP is 192.168.0.1

but 1.1 is not working also

There several software like kerio etc. may b u will able to freeware


Try these also
www.pppinfotech.com/pppshar.htm

mybroadband.co.za/vb/archive/index.php/t-34365.html

www.cablemodemhelp.com/vpn.htm
www.howtonetworking.com/Windows/vpnsetup.htm
hidev.com/technical/vpnsetup.htm

Try these links

I think ur PC must b within Network sharing the Internet

still error

when i used 192.168.1.1 on LAN card (ICS error)

when i used 192.168.1.0 on LAN card (Invalid bits error)

No Iam not using router
I want a alternative for 192.168.0.1 internet sharing on PC because This IP is used by my internet provider so, i can not share internet with other home PCs.

thanx when u got some thing email me or reply

Thanks

I am working on NW project so, If u people tell me directly solution steps it will b useful. Searching I know that.

Thanx DimaYasny

i try and then tell u.

2nd u told me that ur cisco friend for mesh help did u contected him?

Hi

I want to share internet with my home network PCs but the IP of 192.x.x.x series already used by service provider. I have one wireless LAN card and one Simple LAN Card.

I am connected to...

I am able to connect PCs Through mesh network
Now
I am trying to connect them to internet I know
Possible sol. that internet sharing on last node but my internet provider is using 192.X.X.X...

Ok
Both cannot access each other or one of them can?

Uninstall means it uninstall driver of card and re-install some times solves the probl.

File sharing in network properties of both are...

R they pinging each other and internet works fine on both?

Uninstall and re-install the network card from
device manager.

SOme times anti-virus and firewall stops such as Norton Cooperate...

Hi

How can i install virtuall Wifi Adapter on PC, Its config steps and Type of WIFI LAN card(Dual band Wirerless Card must be req. ?)

TheNNS is right many vandor drivers are still not signed so no worries its ok. download driver from ur vandor website or driverguide.com

Sorry that above post for some one else
The system u was unable to see they are may be behind some firewall or ping BIOS is off uncheck.

Yes If both network are DHCP server and assgned automatically you can access or assign IP Manually in range of desired Network, 2nd if ur still unable to work then enter IP in IE where u want to go

Yes If both network are DHCP server and assgned automatically you can access or assign IP Manually in range of desired Network, 2nd if ur still unable to work then enter IP in IE where u want to go

No AP should involve when three PC's Communicating with each other or Hardware device (like cisco routers) one of PC in Mesh Can only route the request of other who can access AP for Internet or...

Please if u know some one ask him wat i want to do(as exactly described above).

And Try to find from where i should start (Which Protocol, Software and Hardware requirments etc.)

But there no link for download software i tried google but all in cisco

mean while i think i should try Adaptive Wireless Path Protocol (AWPP) also its good link thanks

Thanks two brains having some idea can do some think useful as ur helping me out with useful ideas , links and emailing some.

I am very greatful to u

Thanks Useful links

Wat exactly i want is to connect three PC's with each other without AP using Wireless LAN card and one of them route there request to the AP for LAN or Internet

I am using WinXP Pro SP2
I stuck in MCL as described above
and now in AODV there is install.txt in 7th step error in config file reading

And i go to AODV protocol page i sent u from ur 2nd last link