I couldn't check anything in the computer because I'm 'bout 90 miles away from it currently.

I spoke wth Mom-in-law after dinner, and the folks from Verizon were able to get her thru the set-up...

Yes, that's pretty much the case....I put in the DSL installation disk that Verizon sent with the router/DSL modem, and it does a little check of the computer and reports that all is well except that...

Greetings
One of the cards is a Belkin, the other a "HomeFree" card. The latter worked in other comps. The former was new in the box. Both had the OEM driver disks. The belkin is still in the...

Greetings
My Mother-in-law finally decided to get DSL and received the "kit" the other day. I put in a network card and got it set up thru WIN98SE. No problems there.

The software that came with...

If you wish to change the drive's file system, you will have to "fdisk" it, and delete the NTFS partition. Of course you will lose all your data, so if you need anything important, get it before you...

You may need to get into your CMOS setup so the computer can "see" the drive. If your comp doesn't auto detect drives, it won't see it until you "force it" to.
My $.02

I think AMD is the best "bang for your buck".
Pentiums are nice, but you're paying a premium for the name.
That's my two cents.

If your computer originally had pc133 type memory, you have to stay with that type of memory. (Unless your MB supports both types) Check to be sure you seated everything in correctly. I've been...

If your old computer had "Go-Back" in it, you'll have to get rid of it first before the new OS can recognize it. Here's a link that will provide some help....

You need to run fdisk and see if your partition has been "undone".
If so you'll have to create the partition, format it and re-install your stuff.
If you're partition is still there,
verify that...

Check here: http://www.giga-byte.com/Motherboard/Support/Manual/Manual_GA-6WMM7.htm
that's the manual for the MB mentioned.
It should have jumpers locations, etc.
Hope that helps.

It would be interesting to see if the on board display is alive while boot-up is going on. Perhaps you could borrow a monitor switch or a second monitor to hook up and observe?
My W(ild)A($$)G(uess)...

I don't know about win95 or ME, but the start-up disk for win98 doesn't have the "deltree" command on the disk.
I added the file in a "custom" star-up disk I made.
If you can boot up your computer...

Unfortunately, you need SOME way to make the computer boot.
See if a friend has a win 98 startup disk. This will alow you to gain access to the drives and hopefully undo what you did.

Best of...

Just in case there is any other poor soul on this board that is still running Win98 like me, read this short article.
http://www.msnbc.com/news/1002736.asp?cp1=1

:sad: I wonder if I'll be able...

I find it amusing that with all the "Window Smashers" out there, that their choice for an OS has all the "look and feel" of the product they're trashing!
For every satisfied customer I'm sure you'll...

We run System Commander on all of our laptops at work. You install it thru win 9x. It does a whole lot of work for you as far as setting up and formatting partitions, making adding another OS very...

If you are trying to get rid of the program name in the add/remove programs section of control panel and the program has already been removed, you will need to get into the registry to delete that...