Well I could be wrong, and it wouldn't be the first time. I do have a cold house, I like it that way. Also according to my Enermax it says that the instide of my computer is at 12C atm. I know thats...

well I like it cold haha. It is warming up outside. now so the temp is going up too. its up to about 14 C now. But I just run a normal heatsink, and 4 exhaust fans.

well to tell you the truth you dont need a boot cd to get on anyones computer. But I am sure this is not the place to be talking about this, if we have solved the problem.

Go back and unplug all the un escential components. Cd-roms, floppys, sound cards, ethernet, ANYTHING that is not your video card, or hdd (if you have raid keep that plugged) If it still restarts,...

first off what type of processor is it? because 55 degrees celcius is not healthy. I think the fix would be a new heatsink, if it is a socket A processor (thouroughbred - xp, athlon, and some...

Do you mean without being intrusive? without actually being inside the account?

Yes it is, insert the windows CD, and when it asks to install windows it will say that windows is already installed, go ahead and advance to the next screen. There it will say

Quick format fat32...

for future reference. If you have a sibling rivalry (which was my case) and you want to get on their computer, but they passworded it. Just reboot in safe mode, and remove the password all together....

Are there any chances that you have viruses? Does the computer still run slow with the old ram only installed?

Solved, needed a fresh copy of windows.

Ok I received an hp pavilion 7970 desktop, that the owner had figured was shot.

the powersupply and old 56k modem were shot but most everything else seemed in working order.

I tried to install...

ok so the problem was something simple, like it usually is. I neglected to put a fresh copy of windows on the HDD. Oh well, I won't take windows installions so lightly now.

Ok so here is what I am running. I have a p4 prescott 2.4ghz, 1gig of pc2700 ram, and an Asus p4v8x-mx. Basically I can get into bios, do any changes I want, but the comp will not boot up, at all....

Also turns out my ISP has become really ascinine. I have been paying for what I call "incomplete connection" Turns out because I have 2 computers hooked up to the same Internet, I have to pay more...

I have found the cause of the malfunction. I am using integrated 10/100 connection on the machine the primary connection comes from. Also on the other machine. I have tried using a ethernet card to...

I have tried each cable, on each computer, where they stand with all the coils (tons of coils btw) and with no interferance or loss of connection on either machine. I feel as if the cables are not...

yeah that describes it pretty well. Perhaps you could help me figure out why I can't do it through 2 seperate ethernet cards... Because honestly I would rather bypass the router completely anyways. I...

Correct it is a Non-Wireless connection to a cable modem, so yes Coax input to the modem. Then Modem to rp614 and 2 cat5 cables out to seperate computers. Both cat5 cables are very long, one computer...

Both Computers will hold connection if they are hooked up to the modem independantly. But when using a the router neither computer holds connection.

I have tried updating the firmware, and...

Hey all,

This is my first post. I have a netgear rp614 router, and have a pretty odd (at least to my knowledge) problem. I get connection, but the connection disconnects itself off and on. about...