Reading your post as I understand it is that you may have a defective ribbon cable connector that connects to your LCD screen opening it may be one of the solution but be very careful as you said it...

First things first your problem started when you plugged-in your DVI connector, you may have pushed the card to hard and it, extracted the card little bit thereby causing the card to improperly sit...

Restore folders or backups are store in another partition or folders specially in Vaio, as with any other branded units but again this require that your hard disk start normally, but if has a...

When during the hand tap the hard drive was accessing your hard-disk, it has really clobbered your system and in your post i see that no os is detected, I have a post here in daniweb regarding hard...

try isolating the problem since this whole thing started only after you upgrade, try the old memory back and see what happens or better yet, try the memory one by one,analyze then isolate, this are...

does your pen drive really have a built in battery to charge if not, is your pen drive really a pin drive or is it a usb mp3 player with built-in battery, for if so your batteries is defective, it...

if your system allows 4gb and the system only reads 3.1 GB theres somthing wrong is the memory being read minus the video being shared or, yet is your system video use shared memory and if it is how...

Nice to hear from you, I honestly knew that your gonna find the solution.Good hunting, Lykwyz take care and have a nice day.

junt

I will answer that question with a question was the game or let me paraphrase it., did the game that you are trying-to run did run at one time or another after you installed it?.,or was this a...

1st things first check your wireless router configuration and you should know it thru one of your units with are connected,
2nd check your wireless configuration in your network preferences pane...

I have attended Microsoft seminars and its a very complicated thing using different version of windows in a networking scheme like vista and windows 98se and its not advisable., for the system do bog...

I noticed in your post you tried firewire and you said you boot up the G4 and booted the G5 haven't you tried to make the G5 boot up 1st holding the T key and once you can see the FIREwire sign on...

Everybody loves to lend a helping hand but first the best things !st should be that you tell us what your unit is or some specs for if its a mac in network utilities in the preferences pane the IP...

I have G3 Imac and a very reliable piece., But most of the time when it really breakdown is due mostly to the power supply, my unit which is a G3 which broke down due to power supply problems., Made...

If you hear timed clik cloks on your hardisk its time to say goodbye, for there is no way you can have it working again.
the hardisk has crash for it cannot recover from a physical damage that has...

Mac OSX Panther is the most STABLE OS there are lots of sites in the net that can help you.

junt

Powerpc can run OSX panther 3.9 max but you must first upgrade your pram it is the button located on the right side of your CPU/monitor just make sure its a powerpc G3 try mactracker to know what...

Of course it will not do anything with your systems if it is an original apple OS installer you are using but if you tried the semthex 10.4.8 installer or the X86 for intel SSe2 SSE3 then you could...

Since u assemble it check and recheck your BIOS settings if its an intel board there is a setting there which disables/enables the cores as well as with any motherboard check core settings

junt

I read you know how to use a tester, take out your motherboard and inspec it closely there are components mark as f1 or F`s these are thermal lag fuses for protection check if they are open and try...

I really dont know what your preference is, as for me I have both worlds in one machine an Intel motherboard with built in Graphics accelerator that supports openGL I can run my counter strike and...

upgrade your bios for i understand that your system prefer single channel memory and it could have been better if you go to the website and check your motherboard support to better understand your...

Of course it will not do anything with your systems if it is an original apple OS installer you are using but if you tried the semthex 10.4.8 installer or the X86 for intel SSe2 SSE3 then you could...

Power PC G3 is capable of running OSx panther, jaguar, and even tiger there are even threads in the net showing picture that it can run tiger the slot loading, well I hope ihave help you in any way,...

Yep! or better yet get a freelance retailer to get you as Tech guy because theirs lots of bad or crystalized solder in those boards and can lead to an oddball of problems if not diagnose early, Good...

I have had a lot of encounters with this type of problems in the past and it is an intermittent problem associated with a bad solder, and or a loose contact on connectors sometimes it just stopped,...

First and foremost your systems does not turn on if you don't have any memory and thats for starters it may turn on without any drive but it wont really turn on if it does not have any memory on it...

Well you can also try to take out the card and clean its gold finger connector with a good eraser and when you put it back you should see to that the card is firmly sited on its connector so as to...

to tell you the truth it doesnt necessarily means its the flyback there is a lot of support circuits around the monitor systems it may be one of the components, surrounding the secondary low voltage...

The only thing you got to do is disconnect the other computer when you you are using the other for it has something to do with the termination of its cable that flags down the hibernation effect for...

how about trying to put a cooling system to your CPU

The defect you are trying to show is not on the cpu it is in the monitor system, my Imac G3 showed the same symptomps until it shuts down every 5 to 8 minutes i think it has nothing to do with...

My Imac G3 was always acting up when it turns on after 5 to 8 minutes it shutsdown, so i decided to open up and found out that it has a defective power supply, no parts available so I dissembled it...