you need a printer that has an ethernet port. Or just leave the printer's computer on all the time...mine is and has been running for years.

Please go to Start/Run then type cmd and hit Return. That will bring up a black window.

type /ipconfig /all and post the results here.

You may have your DNS servers incorrect. Here's an explanation of how to fix that.
...

A load balancing router simply routes packets using RIP or similar using available multiple paths if the routing table has them.

You can usually set load balancing to work for a particular...

http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=DIM_P4_4600&os=WW1&osl=en&catid=&impid=

This issue sounds like permissions have been tampered with...I suspect Norton's. A caveat, I don't know T-link and I'm not familiar with kaspersky, someone here may be. What I do know is that most...

problem with overlap is multipath. If signals reach the receiver at different times the signal will be degraded, not strengthened.

You can do file sharing but you'd better do a lot of planning...

even if these adapters gave you the entire 200Mb/s you probably won't be able to tell the difference between that and 100Mb/s ethernet

try www.learnthat.com

not an endorsement!!

Guys, I've had an XP computer lose connection before and drive me crazy. Here's something to try. Goto Start, Run, and enter regedit. Being VERY careful about changing anything, go down thru the...

Right click on My Network Places and choose Properties. Right click on Local Area Connection OR your wireless connection and choose repair. zeroth

I don't believe you have the kind of QUS you want in that router. Take a look at this, though:
...

mogivite, it sounds like you've got a wired and a wireless connection going, which really isn't a problem. I don't know why you have the issue when you update your router, I'm not familiar with that...

It won't work the way you have it configured. You have to go into router A and see what DHCP addresses are included in the setup and make sure router B has it's IP set outside that range but within...

Good luck...before re-formatting, I would give the folks at the Virus, Spyware, etc. forum under Windows a chance to help you fix it first. There are some tools listed there under the sticky posts...

I've re-read this a few times and the only things that occur to me are to first, once you get the acceptance of the password and get the 0.0.0.0 address, /release and /renew the IP address (I'm...

Is there any chance you have norton's on either computer? Since it comes with every new machine, sometimes even when you don't activate it remnants can prevent computers from communicating -

If...

There should be a switch on the front left of the computer body...labelled wireless on/off. This switch is very inconvenient if you are carrying the unit around - make sure it's not switched off.
...

Don't count on being able to run simultaneous static and dhcp on any setup with a Linksys router involved.

~z

I can´t comment on the internet options command but is this problem happening at one public wifi or at any? If it´s only the one, then check to see if there is a power transformer or other type of...

It´s a good question. I am supposing from the question that you are on a dialup connection. If you are dialing a local number, unless you disconnect and redial, it is unlikely that they will charge...

Hi Schtrudel,

When you get the box asking for user and password, try typing administrator and no password and see if that lets you in. If so, you are OK but need to do some work on your network...

Are you using dhcp to assign an ip number or are you using static IPs. If the latter, the two computers should not have the same number...

try using everest by Lavalys, Inc. It´s a great program and should be able to find the manufacturer for you, as well as give you a report about everything on your system...It´s come in handy for me...

Assuming you switched the cables at the router end and tried them in different ports, you should then know if you need to address the router configuration, which should be available through the web...

Hi again, Marar,

OK, you first need to go to the forum called Virus, Spyware and other nasties.

That forum can be found under Tech Talk, just like this networking forum. Except you have to...

Hey Marar,

Sounds like you have multiple problems there. Probably the first thing to do is get rid of the virus. Go to the sub forum - Virus, Spyware and other nasties - it´s under Windows...

Theoretically, you don´t need a wireless router. However, practically, it is something that I would recommend. You won´t have any problem once you put a router in the setup...

Nice project. First, tell me how far away you are and if you have line of sight to the transmitter. Since you are on the ground with the antenna, it´s going to make the link more problematical. ...

Hi Bob, it sounds like you are well on your way. I´ve got one of these routers and, although I don´t have a reason to put it outside, I´m wondering where the connector is for the outside antenna. I...

Cozzy, he´s replying to my post and I apologize for getting in the middle of your problem - here´s some more info on the original question:

OK, I think we are narrowing down the situation. ...