"But i want it to work with my desktop you know." You can use the big monitor at home by disabling the onboard graphics device. If you want to go on the road, re inable.

"So, can you suggest to...

oui, capper. there COULD be more than two pins.

RE: 08020017068 The card itself was made in India.
RE: PCI 1394A , just means what you already know, generic term for PCI Firewire adapter of which there are many different types.
RE: ...

while I'm checking on info in your post, Is the monitor new or used?

(right clik) Desktop > Properties > Settings > Advanced (button) > General (tab) DPI (adjust) setting (if possible)


ALSO: (right clik) Desktop > Properties > Settings > Advanced (button) >...

Depends on how many open slots you have open. Mobo pic I found showed 4 PCI 2 slots, the green one is specifically for graphics adapter, just don't recall name.

If you HAVE to use green one, flag...

Suspect you orig. prob. was less hdwr. than software. LCD is still fairly new so DRIVERS, more to the point, lack of correct ones is usually a MAJOR issue. The new card should work if you can...

IRQ and/or I/O conflict on one or both cards. Like as not it'll boot just as well if you remove the other graphics adapter.

Copy your post and private mail to Beastmanh.

Contact mfg. of card and dnld. THEIR driver disk.

I'm getting a Error

There are no Active Mixer Devices Available. What do I need to do to correct this? Also if anyone knows what else I need to download and install for my computer to go back to...

The software was written by ESS Technologies, Inc., from what they're saying they didn't actually mfg. the card. Finding the jumper settings I had no better luck.
Remove card and write down and...

"Then after I installed divx and some sound codecs for a troublesome .avi file the sound disappeared (Codec Pack All in 1 6.0.3.0 and AC3 filter pack). The retry of the older, and newer Realtek...

Cards of that type sometimes have a sound device on them as well. If so, disable one or the other. Also, prob. cold be a IRQ and/or I/O conflict.

Are BOTH serial ports active, assigned the SAME serial port #? By default, each serial port is assigned a matching IRQ.

If you can get the CD to work with another machine maybe not much to do. Otherwise, unless you put a big chunk into the drive, repairs probably aren't worth the effort in time or $$$. Most...

No one quick post is going to suffice here so I'll address the first few paragraphs to start with.
The system can't find the CD drive, your power is going TO the device, it just ISN'T circulating in...

>>>This device cannot find enough free resources that it can use. (Code 12)
there aren't enough ports and/or IRQs to operate the device. either follow it's suggestion and remove some devices or use...

Contact the thermaltake medialab site's support page & ask. It's THEIR job to know.

Ugottherightdrivers?

Disabeling in "Device Manager" isn't gonna help much if any. I'd wait until you get some reasonable service before you go there. After you get the drivers, etc. installed, you may not need to. If...

Well the light eventually dawns. An alternative that you might want to consider. As I read it a critical feature is a preset start/stop time. Unfortunately this isn't going to be much help there....

It's hard to make a recommend on something that's to be that personal.
The same store, and I presume others, have other selection available online, however they're bound to be more pricey.

I'd assume that you've given up on this or have solved it in some way.
Modems & sound cards frequently use the same IRQ (interupts), one or the other would need to be changed.

Have you tried the cheapo rack at Office Depot, etc.?

VC cards almost never show up on the bios.
If it shows up on your monitor that usually means that it's working, but you're stating that it doesn't?
Details beyond that are available at the mfg.s...

You're probably not gonna find much using the PCB number, the 400 number may be a part number U can use in your search engine.
It's probably an IDE adapter for a specific and old CD drive, or it...

Contact the Pinnacle web sites tech support, that's what they do.

Specific drivers, where available, for the specific need, etc. are free downloads from the manuf.'s site (you might have to register, usually free, at the site however).

I'm assuming that your haven't disturbed any physical hardware connection.
This is either a "still missing" driver file or a specific tweak to your software settings.