Hi,

What are you trying achieve by turning capital lock on after receiving a character ? If you are trying to get upper case letters into your program, then if you switch it on after what will you...

As far as I can recall there are a number of spring clips round edge of keyboard and you need to press keyboard into place at those points and ensure clips spring into place.

Or do I misunderstand...

Thanks for letting us know - glad to hear it is working..

Denis

Please try this

1) right click in unallocated piece. You should find an option to create a partition. Decide how big, say 80Gb, click ok etc

2) you will then be left with about 150Gb...

Hi,

If you get any liquid in a laptop keyboard then you will almost certainly need to change keyboard. Most are quite easy to change, being clipped in and then connected to laptop by a ribbon...

Hi,

Have you tried keyboard on another computer ? If so do you get same problems ?

If so, take it back to where you bought it and tell them it faulty.

Denis

Hi

You are not wasting our time - tell us what operating system you are using and I should be able to tell you how to partition it.

Denis

The disk has a partition, so how many do you want and why ?

What operating system are you running ?

Denis

Hi,

Have you plugged it in USB port and switched it on ?

Does you computer recognise it and install drivers ?

If so nothing else to do, except use it.

To use it, go to windows explorer...

Sounds (sorry about the pun!!) that you need to install the sound card drivers.

If the sound card is on motherboard then you need drivers that came with mother board (on CD). If you have not got...

Try cleaning rollers and everything you can get to on paper path. Use hand wipes, or baby wipes, etc

It sounds like the path needs cleaning.

Firstly, my apologies for the delay in replying.

Secondly if you follow this link to Microsoft it details how to share your printer....

It sounds like keyboard is failing.

Two options replace keyboard, it normally springs out, then disconnect ribbon cable and put new one in.

Quicker solution is to plug in an external keyboard.

You should be able to redirect the LPT1 port to USB - I have done for customers who have old software which only uses LPT1 port.

Steps are

1) get printer working on USB port

2) then share...