Hi disophisis
It should just plug and go , thev router is the important part tro get setup properly just make sure you secure your wireless
post back if need some help
have a good evening
Dock

Post back the Brand of your router

take cable from modem into WAN on the router. plug cable from router into switch, plug computers into switch.
Do all this with power off to everything
Power up...

ADSL Modem to Router to Switch to Rack
Do a ip reelase renew on all machines or reboot all
After this is done Internet should be seen by all computers
If you want to share info on computers with...

I find lots of drivers for LAN exc. at this Intel site
http://www.intel.com/support/chipsets/sb/cs-009249.htmt

Start > Run > Cmd > ipconfig returns no information for the problem desktop PC.
and what is this info it returns also include info for other computers that are working
Thanks
Dock

check you firewall and see if the ip address of trhe router is blocked

+ Can anyone suggest me Router which takes a Ethernet cable as Input and Output. All could find in market was Routers that take Phone Line as Input and Ethernet cable Output.
Most Routers are...

Hi Scooby
This program is free and might be what your looking for
http://www.radmin.com/products/utilities/ipscanner.php
The site and downloads are safe I've been using their products for years....

The name and model number of your modem would be a big help!
reply back and we can help

Years ago I had a software program that did what you are looking for
I think it was called Electronic WorkBench Software
I would google the name and see if its still avail
Its not cheap but they...

Hi Pablo
Your english is pretty good I would not know how to even begin to reply in Spanish
I googled you PC Chip and got nothing, can you provide more info like motherboard nbr you might have to...

Hi
Just a quick note to help with the software issue go to
www.techsoup.org if you are a registered charitable or non-profit organization you will get Server 08 for about $75.00 US with 5 CALS...

Here are some helpful sites
http://support.microsoft.com/kb/306126
http://www.practicallynetworked.com/sharing/sharing.htm
Also if you don't want to buy another NIC card google
Winproxy I think...

Hi Graham
Welcome to Daniweb
When you originally setup or had your netgear router setup a password was entered probably for login to the router
then a WEP or hopefully a WPA security password was...

DNS Domain Name Server
We can help I will need more info
I will try and get back tomorrow and see what we can do
Your IT guy should be able to do this in about an hour
Working with the youth...

you have your own domain
I'm assuming its for Holy Spirit Catholic Church Fountain Valley??
Your domain probably assigns IP addresses. I highly recommend you get someone with IT networking...

What is it you want to do? How many computers?
Do you have a router which will do NAT dynamically?

More info please
Router manufacturer?
How old is the router?
ADSL Modem or Cable ?
Is the router and modem built in together?
What are your O/S on your computer ie Vista XP ????
post back and...

This should help

http://answers.yahoo.com/question/index?qid=20081216020518AAB8uTA
If you want more info please post back

Hi JD2
Please respond on this thread sending emails to me directly usually end up in the junk email file.
go to ftp://ftp.networkeverywhere.com/nr041_qi.pdf
this will show you how to setup the...

Did you do a ip release and renew on all the computers?
go to start>run>type "cmd" at the prompt type ipconfig /release bunch of zeros come up
type ipconfig /renew you should get ip address...

check your model number on the router nothing comes up on Linksys website under the number you posted. Is it wireless?

Sorry to take so long getting back to you, I have a big networking job to do next week and its taking up too much of my time. I had a similiar issue like yours with one of my customers, after trying...

Lets try this 1st go to control panel>network & sharing center>manage network connections
>Right click on the wireless network connection> go down to properties> Internet Protocol Ver 4...

Hi Tanm

If you look at your 1st post IPv4 192.168.1.3, the wired post is IPv4 192.168.1.2, the last post is a wireless connection IPv4 192.168.1.3. Why its not popping up as an IP conflict is...

google it
http://dmhoo.com/huawei-routers-simple-configuration/

Can you go to oner of the other wireless computers that is working and also the one with the cable connection, Do an ipconfig /all on both and post the results back here. Also where are you?

The router wouldn't reset itself you must push and hold a reset button on the router to reset it.
Power off your router and your modem & PCwait 1 minute power up modem , wait another minute and...

Hi Jeff
Are you using dialup? Have you ever had the setup your descibing working?
If not why are you not using a router plugging the ADSL or Cable modem into the WAN plug on the Router - plug all...

Who manufacturered your router
Perchance is your O/s Xp and your friends Vista?
DrD

Hi KK
http://www.auditmypc.com/firewall-test.asp
This might interest you
DrD

Hi KK
Did you go to www.radmin.com and download those free port / ipscan programs if memory serves me right I think you can close ports with one of them just be careful there are ports you need...

more info would help
router - manufacturer
switch - manufacturer
Your ip address assigned dynamic or did you setup static
the data transfer issues some of the machines - which ones is the WinMe...

Hi
This is a list of ports hacks use
http://www.tcpip.nl/Security/portlist.html
check it out also a cmpany called radmin
I think its www.radmin.com have free downloads for ports ip addrsses etc....