you can alway go for the refurbished drive, you have to make sure its the size that advertised, the correct file system and the drive integrity, which is going to be extemely difficult. you run a...

try other sata slot,,,how many you have on your board

was the first HDD on a sata port, are you still using that old HDD

thats just hardware detection, all hardware will show up there does not mean its working properly. try load the drive by itself ( set the jumper to master) if the pc boots and tell you cannot find...

the reason for this is that windows cannot recognized the HDD basically the file system on the HDD is corrupt and windows cannot decide what type it is,........... AGAIN are you certain that the...

again what file system is on the HDD you are trying to look at

start the pc in safe mode let us know if you can see the drive

what file system is on the HDD and what opearting system are you running on your PC

check the jumper setting on the drive, one should be master the other master with slave or both should be set to cable select and put the master drive at the end of the cable and the slave on the...

is this drive on the correct channel, is it detected in the bios, if the above is correct them i assume the drive head/mbr is damage

base on whats in red how can you install windows on the drive and it's not showing up.

Win me is THE worst opearting system ever created. this was a desperate try by bill to change 95. u might have to install driver for your burner for it to work correctly on me. as for the spec u can...

your cd burner what are the spec, is it cd/rw +- or just + or - and what thype of mediat are u using, some time if u use a cd that is a minua or plus only your burner might not read it.