Try this

laptop 1 change the ip adress in network settings to 192.168.0.1
and sub netmask to 255.255.255.0

Same on other laptop 192.168.0.2 same sub 255.255.255.0

Computer 192.168.0.3 same...

Hi
A pop3 (or just pop) account is an email account. This is where mail will sit until you download/read it and decide to file it, delete it, etc.

With POP3, the mail is "popped" off the gmail...

The easiest way would be to get your self a cross over cable. connecting the to computers together .... make sure in same workgroup and under network connections give the computer with the internet...

I hjave a DV6000 ..... front left turn on the wifi switch and you should be good...

Darren

Hi

the first thing i would do is make sure the 3 computers are in the same workgroup. HOW.... right click my computer and select properties,,,,, under computer name note the name of the work...

To set up your Outlook Express client to work with Gmail:

Enable IMAP in Gmail. Don't forget to click Save Changes when you're done.
Open Outlook Express.
Click the Tools menu, and select...

Hi

On his laptop firstly make sure you are in the same workgroup. Right click my computer select properties ... under computer name see the work group make sure they are the same.

Second......

Hi

thanks for the info from here we can progress

Darren
we will be back

Try using system restore ...... set your computer to a time before this problem occured

Hi

Do a System Restore to a few days ago .... to a time you knew the sound was working.... To start system restore......

Click start ..... all programs..... accessories.... system tools ........

Hi

Did you at least install servicepack 1 for XP .... or should i say ... click start .... right click My Computer.....then properties

Here under System you should see the xp installed on...

Hi

Check cable between screen and video card... Pay careful attention to the pins and make sure one is not bent. see if you can loan another video card just to test....

Hi

Check cable between screen and video card... Pay careful attention to the pins and make sure one is not bent. see if you can loan another video card just to test....

Hi

On the motherboard there must be a plasic jumper to clear the cmos. pin 123 ..... pin 12 is normal pin 23 is reset cmos power on in pin 23 nothing will happen thats fine hold power button for...

Hi G

You could try system restore... To restore your computer to the day before you sent it out to be cleaned.... try the following... it is totaly reverseable....

Click start ... All...

Well Done Matilda .... for taking the bulls by the horn.... glad we could help

Darren

Hi

The first thing i would do is remove the Video card for now. hopefully your motherboard has a VGA port ... if it has plug the screen into this port and try to boot.

let us know to this...

Hi

On your keyboard... Press CTRL+ALT+Delete ... this should bring up the task manager. click on File then New Task ..... in the box that appears type explorer.exe and press enter....

let us...

Hi

Ok set up the IP Address on you XP machine First to 192.168.0.1 as explained...... Set Win 2000 machine to 192.168.0.2

When you have done this try to enanble the sharing on your dial up...

Hi you may need to activate the drive .... right click MY Computer and select Manage .....then Disk Management activate the disk and format...

hope this helps

Darren

Hi

wrong forum but thats ok we are here to help. Create a new user account in controll panel and make it an adminstrator .... enjoy the game

Darren

Hi

I use Parento logic antispyware and works as well as the other mentioned above. Ask you first before any changes are made ie.. Allow Deny block

Darren

Hi

Make sure that you install the printer drivers on your computer as well.... Install new printer .... select network printer .... find the printer and install drivers.... Make sure the printer...

Hi

there are many conspiracy theories out there. You seem to have 2 computers one you are chatting to us on and another... not working. I would install the XP again (i dont use vista two slow for...

Hi
Give me the exact make and model number Acer Travelmate 4000 what are model numbers underneath. We can use system restore to go back a few days before you installed all the drivers for the...

Hi Ranger

3 points to follows to fix this problem.

1) on XP Maachine go into your network connections ..... when you see the icon for you dialup connections,,, right click on it and select...

Hi Mark

Restart your computer into safe mode by pressing the F8 key on start up Keep pressing until safe mode comes up. choose Safe Mode then let the system start

The icon will be larger than...

Hi Mubo

The first thing i would do is remove all the PCI cards from the machine ... including your graphics card. Hopefully your motherboard has a VGA port.... plug you screen into this port for...

Hi

Thanks for the feedback it is helpful and appreciated

Darren

Hi

Do you have Service Pack 1 on your PC it is required for usb support

Darren

Hi

Thanks for the reply. How much memory do you have on the Laptop ....RAM ??


Darren

Hi

When you replaced you motherboard did you reinstall XP or do an XP repair. XP does not like hardware like MB and CPU changes with a reinstall or repair so do this and it may solve you problem...

Hi

You need to set your network connections properly.

Click Start
Click My Network Place
Click View Network Connections
right click local area connection
and click propeties
D/Click on...

Hi

Power supply problem. Replace it with a PSU that has a rating of at least 350 watt. you will see the rating on the label on the PSU this should solve your problem.

Darren

Hi

Download Power DVD from this link and install it should solve your problem

http://downloads.vnunet.com/download/dvd/powerdvd/_34.html

Cheers
Darren

Hi

I use registry fix and it does the job for me get it here

http://www.registryfix.com/download/indexv.htm

If you want the serial send me a Private Message and i will send them to you
...

Hi

try to copy and paste the files to your reformatted xp drive and see if you can open them.

Darren

Hi marked as solved

Hi

Change the computer name .... lets say it was bassgeek .... change the computer name in the network connections to bassgeek1 and reboot

HTH
Darren
South Africa

Hi

My pennies worth

Make sure that th C drive is set to a master on the jumper settings on the drive and the CD-Rom is set to slave ..... you cannot have two master's or two slaves on the...