Got problem with asus M2N-E SLI and an asus eax1050 pci-express

Reply

Join Date: Feb 2008
Posts: 1
Reputation: drivrutiner.net is an unknown quantity at this point 
Solved Threads: 0
drivrutiner.net drivrutiner.net is offline Offline
Newbie Poster

Got problem with asus M2N-E SLI and an asus eax1050 pci-express

 
0
  #1
Feb 3rd, 2008
I've done all the usual stuff like checking BIOS with an older pci card and tried different voltage, frequency on PCI-E, reset BIOS by taking the battery out, reset with jumper for 10 seconds and vice versa. I am not able to get this card working with the mobo. What happens is that when you put the cable from VGA in to the card it sometimes sounds like a graphiccard error but then it suddenly beeps once and begin showing a rolling picture and then just gives black screen and spots.
I have tried both PCI-Ex16 slots with nogo so I suspect that ASUS card does not work with ASUS mobo.
Is that anyone else experience also?
Would be glad to get some tips.
http://www.drivrutiner.net
a supporter from Sweden
Reply With Quote Quick reply to this message  
Join Date: Jan 2007
Posts: 479
Reputation: mechbas is an unknown quantity at this point 
Solved Threads: 21
mechbas's Avatar
mechbas mechbas is offline Offline
Posting Pro in Training

Re: Got problem with asus M2N-E SLI and an asus eax1050 pci-express

 
0
  #2
Feb 4th, 2008
>>>showing a rolling picture and then just gives black screen and spots.

Bad connection, cable?
Reply With Quote Quick reply to this message  
Join Date: Oct 2006
Posts: 1,294
Reputation: bobbyraw is an unknown quantity at this point 
Solved Threads: 96
bobbyraw's Avatar
bobbyraw bobbyraw is offline Offline
Nearly a Posting Virtuoso

Re: Got problem with asus M2N-E SLI and an asus eax1050 pci-express

 
0
  #3
Feb 4th, 2008
are you fitting the card correctly, you have to make sure the card is seated firmly. and the slot is enabled in the bios. are you using a dual cards?????
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Other Threads in the Troubleshooting Dead Machines Forum
Thread Tools Search this Thread



About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC