| | |
Computer won't recognize floppy drive
![]() |
I have a p4c800-e deluxe motherboard, I have plugged in the ribbon cable to the correct ends and attached the floppy power cable, when I turn on computer the light on the floppy does not turn on. Its not under my computer either, It also wont show up in the bios, any ideas?
Intel(R)® Pentium(R)® 4 Processor 2.80 GHz Overclocked to 3.63 GHz
DirectX Version: 9.0c
nVidia® PNY 6800 GT (438/1.18)
Total Physical Memory: 768 MB PC3200
Thermaltake XaserIII case
Mobo: ASUS P4C800-E Deluxe
FSB: 700 MHz Real: 175 MHz (QDR)
3DMark03- 13567
DirectX Version: 9.0c
nVidia® PNY 6800 GT (438/1.18)
Total Physical Memory: 768 MB PC3200
Thermaltake XaserIII case
Mobo: ASUS P4C800-E Deluxe
FSB: 700 MHz Real: 175 MHz (QDR)
3DMark03- 13567
•
•
Join Date: Mar 2004
Posts: 3,826
Reputation:
Solved Threads: 144
- Try reversing the connector on the floppy drive, even if you think it's plugged in the right way.
- Check the power connector and make sure you haven't 'missed' a pin when you plugged it in. It can be difficult to get the power connector lined up correctly with the pins if you attach it when the drive is screwed into place in the case.
- Check that the ploppy drive is enabled in BIOS Setup, and configured correctly.
Basically, ensure that BIOS POST identifies it correctly at bootup, then check that 'Device Manager' in Windows identifies it correctly. 'My Computer' about the last thing to check!
- Check the power connector and make sure you haven't 'missed' a pin when you plugged it in. It can be difficult to get the power connector lined up correctly with the pins if you attach it when the drive is screwed into place in the case.
- Check that the ploppy drive is enabled in BIOS Setup, and configured correctly.
Basically, ensure that BIOS POST identifies it correctly at bootup, then check that 'Device Manager' in Windows identifies it correctly. 'My Computer' about the last thing to check!
![]() |
Similar Threads
- computer will not recognize sole hard drive (Storage)
- Computer will not recognize new slave drive (Storage)
- Computer won't show second hard drive after system restore (Storage)
- Laptop won't recognize Floppy Drive (Storage)
- floppy Drive(s) Failed (40) (Storage)
- computer will not recognize new slave drive (Storage)
- Floppy drive shows as B drive instead of A (Storage)
- need help with newly built computer (Windows NT / 2000 / XP)
Other Threads in the Storage Forum
- Previous Thread: Major problem with my cd-rom/dvd!?
- Next Thread: Hard Drive GLITCHING and CRASHING
| Thread Tools | Search this Thread |
acronis archivevault atmail backup backupandrecoverystrategy blinkingcursor boot data databasededuplication datadeduplicationsoftware datarecovery datastorage deduping deduplicating deduplication deduplicationalgorithm deduplicationsoftware deduplicationsystems deduplicationtechnology disasterrecovery disasterrecoverydatabase disc-drive discdrives drive emailappliance emailarchive emailstorage failure filters gmail hard hitachi mail maxtor news nobelprize norton offsitestorage partition power recovery restoreserverdatabase serverdatarecovery serverdisasterrecovery serverrecoverysoftware storage terabyte undelete upper windowsserverrestore






