•
•
•
•
What is DaniWeb IT Discussion Community?
You're currently browsing the Troubleshooting Dead Machines section within the Tech Talk category of DaniWeb, a massive community of 391,662 software developers, web developers, Internet marketers, and tech gurus who are all enthusiastic about making contacts, networking, and learning from each other. In fact, there are 2,853 IT professionals currently interacting right now! Registration is free, only takes a minute and lets you enjoy all of the interactive features of the site.
Please support our Troubleshooting Dead Machines advertiser:
Views: 260 | Replies: 0
![]() |
•
•
Join Date: Apr 2008
Posts: 1
Reputation:
Rep Power: 0
Solved Threads: 0
Hi,
I Flashed my BIOS for my ASUS P5E motherboard from the initial BIOS to the 0607 update.
After a successfull Flash and rebooting, the second time I rebooted, the computer would not POST.
Reseting the CMOS (removing and re-inserting the battery) works, and the computer posts, BIOS loads (asks me to press F2 for defult settings), OS loads and computer works fine. However, the next time I reboot, the computer again will not POST. Again it is fixed by simply reseting the CMOS. I've tried this several times (safe mode, normal mode etc.). I get the same pattern:
1. Won't POST
2. Reset CMOS
3. Boots up normally, runs well
4. Reset my computer
5. Won't POST...
Any ideas?
Any other relivent information I need to include?
Thanks,
Noah
I Flashed my BIOS for my ASUS P5E motherboard from the initial BIOS to the 0607 update.
After a successfull Flash and rebooting, the second time I rebooted, the computer would not POST.
Reseting the CMOS (removing and re-inserting the battery) works, and the computer posts, BIOS loads (asks me to press F2 for defult settings), OS loads and computer works fine. However, the next time I reboot, the computer again will not POST. Again it is fixed by simply reseting the CMOS. I've tried this several times (safe mode, normal mode etc.). I get the same pattern:
1. Won't POST
2. Reset CMOS
3. Boots up normally, runs well
4. Reset my computer
5. Won't POST...
Any ideas?
Any other relivent information I need to include?
Thanks,
Noah
![]() |
•
•
•
•
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
•
•
•
•
•
•
•
•
DaniWeb Troubleshooting Dead Machines Marketplace
Similar Threads
- Windows Freezes a few seconds after startup (Windows NT / 2000 / XP / 2003)
- OEM PC -Windows XP Home (oem) does not complete installation-set up loops (Troubleshooting Dead Machines)
- System lock ups, even on fresh Windows install! (Motherboards, CPUs and RAM)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: DoubleTrouble: Window XP - CD Drive stop functioning.
- Next Thread: Mapping ATA HD to Laptop


Linear Mode