| | |
My Black Screen of death.
![]() |
•
•
Join Date: Apr 2008
Posts: 5
Reputation:
Solved Threads: 0
I have a Dell XPS M1210. I have been reading the forums trying to gather ideas that I could use to fix my computer.
The problem: When I start the computer the screen stays black, the Power LED stays lit showing that it is indeed turned on, and the LED that shows that the hard drive is being accessed turns on for only a short period of time. The computer stays at this screen and does not boot anything.
I've taken out the CMOS batter and let it sit for 10 minutes to see if resetting the BIOS would work, but it didn't. I've tried the holding down the power button for 30 seconds too. I have even taken out the hard drive and other components to see if it would boot without; doing my best to narrow down what is wrong. It still does not work. Any ideas?
-Step.
The problem: When I start the computer the screen stays black, the Power LED stays lit showing that it is indeed turned on, and the LED that shows that the hard drive is being accessed turns on for only a short period of time. The computer stays at this screen and does not boot anything.
I've taken out the CMOS batter and let it sit for 10 minutes to see if resetting the BIOS would work, but it didn't. I've tried the holding down the power button for 30 seconds too. I have even taken out the hard drive and other components to see if it would boot without; doing my best to narrow down what is wrong. It still does not work. Any ideas?
-Step.
•
•
Join Date: Apr 2008
Posts: 1,295
Reputation:
Solved Threads: 41
Hey There
first make sure that your video card is firmly connected with the signal cable intact with connector.if you have more than one RAM stick swap it around in the slots.also test your hard drive in another machine.
???????
first make sure that your video card is firmly connected with the signal cable intact with connector.if you have more than one RAM stick swap it around in the slots.also test your hard drive in another machine.
???????
"Live as if you were to die tomorrow. Learn as if you were to live forever" Mahatma Gandhi
•
•
Join Date: May 2008
Posts: 11
Reputation:
Solved Threads: 0
•
•
•
•
I have a Dell XPS M1210. I have been reading the forums trying to gather ideas that I could use to fix my computer.
The problem: When I start the computer the screen stays black, the Power LED stays lit showing that it is indeed turned on, and the LED that shows that the hard drive is being accessed turns on for only a short period of time. The computer stays at this screen and does not boot anything.
I've taken out the CMOS batter and let it sit for 10 minutes to see if resetting the BIOS would work, but it didn't. I've tried the holding down the power button for 30 seconds too. I have even taken out the hard drive and other components to see if it would boot without; doing my best to narrow down what is wrong. It still does not work. Any ideas?
-Step.
I have the EXACT SAME problem... I have been pulling my hair out for the past two days trying to get this machine working. I tried a brand new harddrive, nothing, all boot CDs...Nothing.... do you have ny new info about a solution to this problem? I know that it is a driver conflict with the GeForce 7400 GO and something else. Does anyone have any new ideas on how to fix this? I have done so much to get this working, even called Dell...They were clueless, wanted me to get a new graphic card I know that the card is not the problem its the driver locked in a feedback loop....sigh.......HELP!!!!!
•
•
Join Date: May 2008
Posts: 11
Reputation:
Solved Threads: 0
Well, I think that the Bios is fried because I cannot get anything to happen with my computer. The power button just makes the fan cycle on and the CD-ROM spin for a few seconds, and the lights turn on...but nothing happens. I don't get the Dell splash screen or anything. Dell tech says that I need to replace my motherboard. Its going to be around $299.00 for a new motherboard. The "chip" that Dell sent me was actually a "kit". A CD that is a BIOS upgrade kit not a piece of hardware. This is a testament to the outsourcing going on in our tech society....I'll get off my soapbox.....I would reccomend trying the fn+power button trick to see if your hardware diagnostics will work, and i would take the thing apart and disconnect the round battery (CMOS) overnight. You can get new BIOS chips from these guys http://www.biosman.com/
good luck
good luck
•
•
Join Date: Apr 2008
Posts: 5
Reputation:
Solved Threads: 0
I tried the fn+power button trick to see if your hardware diagnostics will work. What I get is the number lock and cap lock blinking simultaniously and the scroll lock is steady on. The power led remains constant and the battery low led came on orange after being on a while and remains on green after plugging in to wall outlet. Are these symptoms helpful in further determining my next steps. I am reluctant to spend money on parts when I'm uncertain that the problem will be adequately remedied.
I also saw several comment about updating the BIOS from a boot disk. Is this something available to be downloaded?
Thanks for the help,
SGMKBC
I also saw several comment about updating the BIOS from a boot disk. Is this something available to be downloaded?
Thanks for the help,
SGMKBC
•
•
Join Date: May 2008
Posts: 11
Reputation:
Solved Threads: 0
Do you remember when this happened, or how it happened. Did your PC lose power when loading the BOIS? Did you take the hinge cover off and the keyboard to unplug the coin cell battery over night? Unplug everything (AC and both batteries) and hold the power button down for 10 seconds to drain all power and then wait overnight. Use these instructions at dell: http://support.dell.com/support/edoc...n/SM/index.htm
That definetly resets the motherboard
That definetly resets the motherboard
•
•
Join Date: Apr 2008
Posts: 5
Reputation:
Solved Threads: 0
I am not sure what actually happened, my son's computer. After it was no longer working, he did indicate that the screen had done some strange things several time over the course of several weeks prior to no longer functioning (while it was still under warranty) but because he was able to restart and things were fine didn't seem to think much of it.
In order to follow the instructions at dell: "http://support.dell.com/support/edoc...n/SM/index.htm" do I have to buy a special bootable BIOS cd from Dell or can this be downloaded from the web. I did download a file from the web (MXC62A08) to a cd and tried to boot , but does not seem to do anything. The cooling fan does run, the cd reader makes several noises, and the power led remains lit. Nothing on the screen, nothing at all (no runs, no blips, no errors) nothing.
When booting from the CD, should the BIOS battery be connected or disconnected? When pressing F12 prior to booting, how long should F12 be pressed during the boot process, my assumption (although I've been wrong more than once in my lifetime) is that pressing F12 has to be done while the computer in in the on mode in order to have power going to the key?
Is there like a majic button combination that I can push and this will all have been a bad dream?
Thanks for the help.
In order to follow the instructions at dell: "http://support.dell.com/support/edoc...n/SM/index.htm" do I have to buy a special bootable BIOS cd from Dell or can this be downloaded from the web. I did download a file from the web (MXC62A08) to a cd and tried to boot , but does not seem to do anything. The cooling fan does run, the cd reader makes several noises, and the power led remains lit. Nothing on the screen, nothing at all (no runs, no blips, no errors) nothing.
When booting from the CD, should the BIOS battery be connected or disconnected? When pressing F12 prior to booting, how long should F12 be pressed during the boot process, my assumption (although I've been wrong more than once in my lifetime) is that pressing F12 has to be done while the computer in in the on mode in order to have power going to the key?
Is there like a majic button combination that I can push and this will all have been a bad dream?
Thanks for the help.
•
•
Join Date: May 2008
Posts: 11
Reputation:
Solved Threads: 0
I wish that there was a magic key combo that you could push to make it bootable. You have to puch F12 when you see the Dell splash screen to enter the BIOS or setup screens. If you don't see that blue dell logo then you can't even do that. Since he did notice the screen going funny, it might actually be the video card that is doing it. Does the PC have the Nvidia Geforce GO 7400? Or does it have the built in graphics. Those cards are both very hardy cards, but if the computer got really hot (ie: sat on a bedspread) than it might have melted the graphic card, or the tiny parts inside it. The BIOS could actually be doing its job protecting the computer. Again, this could be a costly repair. If you are still under warranty, I would extend it NOW. You could avoid an expensive repair. Sorry for bad news...
Last edited by TurtleVideo; May 24th, 2008 at 10:41 am.
![]() |
Similar Threads
- Blue screen of Death "nv4_disp.dll" (Monitors, Displays and Video Cards)
- Black Screen of Death (Troubleshooting Dead Machines)
- !!Windows startup with black screen?????? (Windows NT / 2000 / XP)
- Blue Screen of Death on XP (Windows NT / 2000 / XP)
- Black screen of death (Troubleshooting Dead Machines)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: Dell Inspiron 5000 won't power up
- Next Thread: Sony Vaio LCD pcg fx140
| Thread Tools | Search this Thread |
appliances beep bioslosingharddrived bioslosingsettings black citrix cmosbattery compaq cpu dead delldimension4500 giving harddrive laptop linux mac neverbuyinspiron1525 nodisplay nopower operatingsystemnotfound osnotfound power ram redhat screen supply ubuntu virtualbox virtualization virtualmachines vmware xen






