PC won't turn on

Reply

Join Date: Nov 2008
Posts: 2
Reputation: aldo87 is an unknown quantity at this point 
Solved Threads: 0
aldo87 aldo87 is offline Offline
Newbie Poster

PC, worked for years, suddenly won't turn on

 
0
  #1
Nov 7th, 2008
I have a PC I built a little over 2 years ago, and it has worked fine until about a few weeks ago. The first oddity was that after I turned it off, it would turn on by itself about 5 minutes later. I didn't think much of this and would just turn the master power switch off in back so it would stay off. This worked fine for a while, but then after I would flip the master power on, it wouldn't always turn on immediately. For a while, the internal speaker would repeatedly beep twice, be silent for about 30 seconds, and beep again. It would do this for about 10 minutes and then stop, and I'd be able to turn it on. After a while it kept getting longer until I could turn it on (up to 1-2 hours). Now whenever I turn on the master power, there is occasionally a long continuous beep, but when it stops I can't turn on my computer. The front panel lights come on and the post LED displays what I interpret as "8." (which I haven't been able to find a meaning to). I'm thinking this is related to my power supply...any ideas?

My specs are:
fatal1ty AN8 SLI mobo
BFG Geforce 7800GT
2 x 1 gig ram (just some generic if memory serves me correctly)
Real Power 550W (can't remember exact wattage)
XP
Last edited by aldo87; Nov 7th, 2008 at 8:31 pm.
Reply With Quote Quick reply to this message  
Join Date: Aug 2008
Posts: 222
Reputation: sparkax is an unknown quantity at this point 
Solved Threads: 19
sparkax's Avatar
sparkax sparkax is offline Offline
Posting Whiz in Training

Re: PC won't turn on

 
0
  #2
Nov 8th, 2008
Phoenix Award Bios -your mobo I think.
Continuos beep indicates-
Faulty Memory - unlikely
Faulty Power Supply -likely
Faulty mobo -possible
Reply With Quote Quick reply to this message  
Join Date: Nov 2008
Posts: 56
Reputation: RLHennig is an unknown quantity at this point 
Solved Threads: 0
RLHennig RLHennig is offline Offline
Junior Poster in Training

Re: PC won't turn on

 
0
  #3
Nov 8th, 2008
ftp://ftp.abitshop.com/pub//manual/e...ty-an8-sli.zip

That's a link to the manual for your mobo. POST definitions are at the very end (see appendix G)
Reply With Quote Quick reply to this message  
Join Date: Nov 2008
Posts: 2
Reputation: aldo87 is an unknown quantity at this point 
Solved Threads: 0
aldo87 aldo87 is offline Offline
Newbie Poster

Re: PC won't turn on

 
0
  #4
Nov 8th, 2008
Yeah, I looked in my manual, but I couldn't find any post code like the one mine's showing. All of those have two digits, mine is only showing a single 8 with a period after ("8."). I'm gonna try to borrow a friend's power supply and see if that does it, otherwise I'll assume it's the mobo.
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Troubleshooting Dead Machines Forum


Views: 1023 | Replies: 3
Thread Tools Search this Thread



Tag cloud for Troubleshooting Dead Machines
About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC