| | |
computer won't recognize new hard drive
![]() |
Make sure to check your documentation that came with the computer.
Yes check the jumpers.
You can also check your CMOS settings on which mode your using. LBA mode is recommended for drives larger than 504 MB and is the only way of dealing with drives larger than 8.4 GB.
Also make sure that the drive slides into the bay smoothly. If it needs force pushing it in the bay, somthing is wrong.
Yes check the jumpers.
You can also check your CMOS settings on which mode your using. LBA mode is recommended for drives larger than 504 MB and is the only way of dealing with drives larger than 8.4 GB.
Also make sure that the drive slides into the bay smoothly. If it needs force pushing it in the bay, somthing is wrong.
If in doubt, reach into the trash can and remove the user guide.
![]() |
Similar Threads
- Computer does not detect hard drive (Storage)
- My computer does not detect my hard drive (Storage)
- computer will not recognize sole hard drive (Storage)
- laptop doesn't recognize hard drive (Troubleshooting Dead Machines)
- Computer won't show second hard drive after system restore (Storage)
- Presario laptop doesn't recognize hard drive (Troubleshooting Dead Machines)
- computer will not recognize new slave drive (Storage)
Other Threads in the Storage Forum
- Previous Thread: What I thought was hd problem was not it. WHAT IS IT???
- Next Thread: Help needed, please help me!!!
| Thread Tools | Search this Thread |
acronis archivevault atmail backup backupandrecoverystrategy blinkingcursor boot data databasededuplication datadeduplicationsoftware datarecovery datastorage deduping deduplicating deduplication deduplicationalgorithm deduplicationsoftware deduplicationsystems deduplicationtechnology disasterrecovery disasterrecoverydatabase disc-drive discdrives drive emailappliance emailarchive emailstorage failure filters gmail hard hitachi mail maxtor news nobelprize norton offsitestorage partition power recovery restoreserverdatabase serverdatarecovery serverdisasterrecovery serverrecoverysoftware storage terabyte undelete upper windowsserverrestore





