| | |
pc won't boot, heatsink spins once
![]() |
•
•
Join Date: Oct 2004
Posts: 44
Reputation:
Solved Threads: 0
I have a m2n32 Asus board.
I was putting my pc into another case and turned it on and the fan turned once and did nothing.
The light on the mobo is on.
I took the mobo out of the case and tried it and same thign happened.
I have took the ram and graphics card out so just the cpu and heaksink. The heaksink just spins once.
I shorted the power to get it on out the case. but still spins once.I have 2 psu's which both should work including the one I was using before i moved the pc into the other case which has been working for a while with the setup.
The same thing happens with both cpu's.
I have also reset the mobo and removed the battery.
I am out of ideas!! i hope its not the cpu. any suggestions or ideas or advice please help.
I have just disconnected the 12v 4 pin power from psu to mobo and the cpu fan works, there are no beeps and no video. my pc doesn't go when the 12v power is plugged in???
thanks in advance
UF
I was putting my pc into another case and turned it on and the fan turned once and did nothing.
The light on the mobo is on.
I took the mobo out of the case and tried it and same thign happened.
I have took the ram and graphics card out so just the cpu and heaksink. The heaksink just spins once.
I shorted the power to get it on out the case. but still spins once.I have 2 psu's which both should work including the one I was using before i moved the pc into the other case which has been working for a while with the setup.
The same thing happens with both cpu's.
I have also reset the mobo and removed the battery.
I am out of ideas!! i hope its not the cpu. any suggestions or ideas or advice please help.
I have just disconnected the 12v 4 pin power from psu to mobo and the cpu fan works, there are no beeps and no video. my pc doesn't go when the 12v power is plugged in???
thanks in advance
UF
•
•
Join Date: Dec 2008
Posts: 2
Reputation:
Solved Threads: 0
•
•
•
•
I have a m2n32 Asus board.
I was putting my pc into another case and turned it on and the fan turned once and did nothing.
The light on the mobo is on.
I took the mobo out of the case and tried it and same thign happened.
I have took the ram and graphics card out so just the cpu and heaksink. The heaksink just spins once.
I shorted the power to get it on out the case. but still spins once.I have 2 psu's which both should work including the one I was using before i moved the pc into the other case which has been working for a while with the setup.
The same thing happens with both cpu's.
I have also reset the mobo and removed the battery.
I am out of ideas!! i hope its not the cpu. any suggestions or ideas or advice please help.
I have just disconnected the 12v 4 pin power from psu to mobo and the cpu fan works, there are no beeps and no video. my pc doesn't go when the 12v power is plugged in???
thanks in advance
UF
please try this: connect any load which draw a few amperes to psu outside. if psu does not reduce its voltage then you must connect cards (ethernet, VGA, sound etc.), RAM, HDDs and mainboard respectively. meanwhile, you must observe or measure 12V voltage of PSU. whenever its gone, you find its defective device. it seems RAM probably
•
•
Join Date: Oct 2004
Posts: 44
Reputation:
Solved Threads: 0
•
•
•
•
i guess that either your psu is demaged or a broken device feeded from 12V line.
please try this: connect any load which draw a few amperes to psu outside. if psu does not reduce its voltage then you must connect cards (ethernet, VGA, sound etc.), RAM, HDDs and mainboard respectively. meanwhile, you must observe or measure 12V voltage of PSU. whenever its gone, you find its defective device. it seems RAM probably
is there anything else i can do to fix it or find the problem.
make sure that the heatsinc is firmly connected to the cpu
Linux boot cd http://www.knopper.net/knoppix/index-en.html
Wubi is an officially supported Ubuntu Linux installer for Windows .
http://wubi-installer.org/
Wubi is an officially supported Ubuntu Linux installer for Windows .
http://wubi-installer.org/
•
•
Join Date: Oct 2004
Posts: 44
Reputation:
Solved Threads: 0
I think I might not have explained it correctly.
with no ram /hard drive or graphics this is what happens.
12 pin power in only heatsink fan run ok .
12pin and 4 pin in the heatsink spins once.
so the problem occurs when the 4pin mobo power is in. which power the components on the board and this is why nothing works.
with no ram /hard drive or graphics this is what happens.
12 pin power in only heatsink fan run ok .
12pin and 4 pin in the heatsink spins once.
so the problem occurs when the 4pin mobo power is in. which power the components on the board and this is why nothing works.
perhaps because the 4 pin is shorting out the board or there is a short in the board
Linux boot cd http://www.knopper.net/knoppix/index-en.html
Wubi is an officially supported Ubuntu Linux installer for Windows .
http://wubi-installer.org/
Wubi is an officially supported Ubuntu Linux installer for Windows .
http://wubi-installer.org/
•
•
Join Date: Dec 2008
Posts: 5
Reputation:
Solved Threads: 0
HI , Try to explain your problem in correct english. i will give the solutions please.
Mugisha James Mihigo
IT MANAGER ASKAR
UGANDA KAMPALA
+256702297008
jmihigo@askarsecurityservices.com
IT MANAGER ASKAR
UGANDA KAMPALA
+256702297008
jmihigo@askarsecurityservices.com
•
•
Join Date: Oct 2004
Posts: 44
Reputation:
Solved Threads: 0
sorry i was in a rush to get the problem fixed and i was tired.
when th 12 pin power is in, the heatsink fan spins fine.
when the 12pin and 4 pin are plugged in, the heatsink fan spins once.
So the problem occurs when the 4pin mobo power is in. which is needed so there is not much i can do. i have 2 power supply's that work and both have the same effect on this board.
when th 12 pin power is in, the heatsink fan spins fine.
when the 12pin and 4 pin are plugged in, the heatsink fan spins once.
So the problem occurs when the 4pin mobo power is in. which is needed so there is not much i can do. i have 2 power supply's that work and both have the same effect on this board.
![]() |
Similar Threads
- no boot, no post, blank monitor after computer was transported interstate! (Troubleshooting Dead Machines)
- Fan Problem Gateway MX6448 Laptop (Cases, Fans and Power Supplies)
- Cpu Fan 3 Spots To Plug In Which Is Ok (Motherboards, CPUs and RAM)
Other Threads in the Cases, Fans and Power Supplies Forum
- Previous Thread: HP Notebook Battery
- Next Thread: how to find where to buy computer fan
| Thread Tools | Search this Thread |






