Individual Sector Reading in C

Please support our C advertiser: Programming Forums - DaniWeb Sister Site
Reply

•
•
Join Date: Dec 2008
Posts: 7
Reputation: dinklebaga is an unknown quantity at this point 
Solved Threads: 0
dinklebaga dinklebaga is offline Offline
Newbie Poster

Individual Sector Reading in C

 
0
  #1
Feb 8th, 2009
Hi All,
I am currently trying to write a program that can read individual sectors on a floppy disk using C. I am building the program to run in a 16-bit DOS environment using the Digital Mars compiler with the 16bit DOS add-on. So far I know how to access the individual sectors but what I want to do is then extract the data and put it into a file. I think that the way to do this will be to use malloc to provide the space to put the data into from the registers but I am getting confused as to how to get this data into there in the start (wether to use a struct or what) and also how to output the data and in what form (%c, %d, etc.).
If you could offer any advice it would be greatly appreciated.
Dinklebaga
Reply With Quote Quick reply to this message  
•
•
Join Date: Aug 2008
Posts: 15
Reputation: xitrum69 is an unknown quantity at this point 
Solved Threads: 3
xitrum69 xitrum69 is offline Offline
Newbie Poster

Re: Individual Sector Reading in C

 
0
  #2
Feb 8th, 2009
•
•
•
•
Originally Posted by dinklebaga View Post
Hi All,
I am getting confused as to how to get this data into there in the start (wether to use a struct or what) and also how to output the data and in what form (%c, %d, etc.).
If you could offer any advice it would be greatly appreciated.
Dinklebaga
For reading a sector, simply you should define a buffer such as
c Syntax (Toggle Plain Text) 
  1. char buff[512];
then use "%X" to print the hex format.
Reply With Quote Quick reply to this message  
•
•
Join Date: Dec 2008
Posts: 7
Reputation: dinklebaga is an unknown quantity at this point 
Solved Threads: 0
dinklebaga dinklebaga is offline Offline
Newbie Poster

Re: Individual Sector Reading in C

 
0
  #3
Feb 9th, 2009
Hi xitrum,
I decided to go down a different route using malloc to allocate it a section of memory of 512 or multiples of depending on how many sectors i wanted to read and then allocating this pointer to the es register (where the memory location for the sector to be read into usually goes) and so far it isn't kicking out an coding error during compilation but when I am trying to simply print this section of memory out using the pointer as reference the results are not what I am expecting. Below is the code that i have so far:

c Syntax (Toggle Plain Text) 
  1. #include <dos.h>
  2. #include <stdio.h>
  3.  
  4. /* reads a given sector on the cylinder, head and drive (cyl, hd & dr)*/
  5.  
  6. read_sector(cyl, hd, dr)
  7. char cyl, hd, dr;
  8. {
  9.     int status;
  10.     int *memsectptr;
  11.     int *tempptr;
  12.     int sectorsize = 512;
  13.     int noofsectors = 1;
  14.     int i;
  15.     char buff[512];
  16.     *memsectptr = malloc(sectorsize); /*open 512 bytes of data in memory to read in sector */
  17.     tempptr = memsectptr;
  18.     _AH = 0x02; /* read sectors instead of verify command */
  19.     _AL = noofsectors; /* read one sector only */
  20.     _CH = cyl;
  21.     _CL = 1; /* starts at sector 1*/
  22.     _DH = hd;
  23.     _DL = dr;
  24.     //_BX = 0x00; /* no offset for data to be stored */
  25.     ES:_BX = *memsectptr; /*Add memory location in to read data to */
  26.     geninterrupt(0x13);
  27.     for(i=0; i<(sectorsize * noofsectors); i++)
  28.     {
  29.         printf("%X", memsectptr);
  30.     }
  31.     free(memsectptr);
  32.     status = _AH;
  33.     return(status);
  34. }
  35.  
  36. /* takes the status code returned by verify track and prints message associated with it */
  37.  
  38. pr_error(error)
  39. int error;
  40. {
  41.     switch(error)
  42.     {
  43.         case 0x01:
  44.             printf("Invalid Command\n");
  45.             break;
  46.         case 0x02:
  47.             printf("Address Mark Not Found\n");
  48.             break;
  49.         case 0x03:
  50.             printf("Disk Write Protected\n");
  51.             break;
  52.         case 0x04:
  53.             printf("Sector Not Found\n");
  54.             break;
  55.         case 0x05:
  56.             printf("Reset Failed\n");
  57.             break;
  58.         case 0x06:
  59.             printf("Floppy Disk Removed\n");
  60.             break;
  61.         case 0x08:
  62.             printf("DMA Overrun\n");
  63.             break;
  64.         case 0x09:
  65.             printf("DMA Crossed 64k Boundary\n");
  66.             break;
  67.         case 0x0C:
  68.             printf("Media Type Not Found\n");
  69.             break;
  70.         case 0x10:
  71.             printf("CRC Error\n");
  72.             break;
  73.         case 0x20:
  74.             printf("Controller Failed\n");
  75.             break;
  76.         case 0x40:
  77.             printf("Seek Failed\n");
  78.             break;
  79.         case 0x80:
  80.             printf("\n status %d\n", error);
  81.     }
  82. }
  83.  
  84. /* main calls verify_track for all values of cyl (0-79) and both values for head (0-1). If function succeeds it returns 0
  85. otherwise it returns the relevant error code to printf and terminates program.*/
  86.  
  87. main()
  88. {
  89.     int status = 0;
  90.     char head, cylinder;
  91.     char drive = 0;
  92.     head = 0;
  93.     cylinder = 0;
  94.     status = read_sector(cylinder, head, drive);
  95.     if( status != 0)
  96.     {
  97.         printf("\nError at head %d, cylinder %02d :", head, cylinder);
  98.         pr_error(status);
  99.     }
  100.     else
  101.     {
  102.         printf("\nOperation completed successfully. See output\n");
  103.     }
  104.  
  105.  
  106. }

Thanks, Dinklebaga
Last edited by dinklebaga; Feb 9th, 2009 at 11:52 am. Reason: syntax highlighting
Reply With Quote Quick reply to this message  
•
•
Join Date: Aug 2008
Posts: 15
Reputation: xitrum69 is an unknown quantity at this point 
Solved Threads: 3
xitrum69 xitrum69 is offline Offline
Newbie Poster

Re: Individual Sector Reading in C

 
0
  #4
Feb 9th, 2009
hix you got some mistakes in C pointer programming.
1/ You declared a pointer variable and allocated it by using *memsectptr ????
c Syntax (Toggle Plain Text) 
  1. int *memsectptr;
  2.  *memsectptr = malloc(sectorsize); 
  3. ....
  4. ES:_BX = *memsectptr;
the code should be
c Syntax (Toggle Plain Text) 
  1. int *memsectptr;
  2. memsectptr = malloc(sectorsize);
  3. ....
  4. ES:_BX = memsectptr;

and the following code will print data in a sector
c Syntax (Toggle Plain Text) 
  1. for(i=0; i<(sectorsize * noofsectors); i++)
  2. {
  3.     printf("%X", *(memsectptr+i));
  4. }

xitrum
Reply With Quote Quick reply to this message  
•
•
Join Date: Dec 2008
Posts: 7
Reputation: dinklebaga is an unknown quantity at this point 
Solved Threads: 0
dinklebaga dinklebaga is offline Offline
Newbie Poster

Re: Individual Sector Reading in C

 
0
  #5
Feb 10th, 2009
•
•
•
•
Originally Posted by xitrum69 View Post
hix you got some mistakes in C pointer programming.
1/ You declared a pointer variable and allocated it by using *memsectptr ????
c Syntax (Toggle Plain Text) 
  1. int *memsectptr;
  2.  *memsectptr = malloc(sectorsize); 
  3. ....
  4. ES:_BX = *memsectptr;
the code should be
c Syntax (Toggle Plain Text) 
  1. int *memsectptr;
  2. memsectptr = malloc(sectorsize);
  3. ....
  4. ES:_BX = memsectptr;

xitrum
Thanks for your help with this xitrum. Unfortunately with this first bit which you told me was incorrectly referenced, when I remove the * from in front of the pointers i receive the error "Error: need explicit cast to convert from int to int*, or in the case of the second: to convert from int* to short volatile. Forgive me for being naiive but I don't understand the differences/consequences of leaving the * in place as they are kicking out an error?

Also when running the code with the *'s in place with the second modification I am receiving a better output (characters are now different from the first) but ur seems to me just to be an illogical memory dump making me think that possibly the program isn't actually reading the sector into memory in the first place?

Thanks,
Dinklebaga
Reply With Quote Quick reply to this message  
Reply

Quick Reply to Thread
This thread is more than three months old.
Perhaps start a new thread instead?
•
•
•
•
•
•
•
•
Message:
•
•
•
•



Other Threads in the C Forum


Views: 481 | Replies: 4
Thread Tools Search this Thread



Tag cloud for C
#include adobe ansi api array arrays asterisks binarysearch calculate centimeter char command convert copyimagefile cprogramme creafecopyofanytypeoffileinc directory dynamic fflush file fork forloop framework functions getlasterror givemetehcodez grade graphics gtkgcurlcompiling hacking hardware highest homework inches incrementoperators kernel km lazy linked linkedlist linux linuxsegmentationfault list lists locate logical_drives looping loopinsideloop. match matrix microsoft motherboard multi mysql number opendocumentformat opensource owf pattern pdf performance pointer pointers posix problem probleminc process program programming radix recursion recv repetition research scanf scripting segmentationfault sequential shape socket socketprograming spoonfeeding stack standard string strings structures student systemcall testautomation threads turboc unix user variable visualstudio voidmain() wab win32 windows.h
About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC