I cannot get my screen resolution to fill the screen of my monitor.
The resolution is currently set to 1024 x 768 on my Hansol 710P 17� monitor,
But there is a gap or black area of about 1 inch around two sides.
For a while I was able to correct this by changing the refresh rate to 100hertz.
And this fixed the problem for a while, giving me the full viewing area on my monitor.
But now even that does not work, and I have a smaller window than my monitor once more.
I have tried altering the settings for vertical & horizontal movement, but they are set to maximum stretch, yet my screen is still not fully used.
I have down loaded new monitor drivers from Hansols web site, but this has not fixed the problem.
I have purchased a new graphics card also, but this too has not fixed the problem.
My monitor is about 4 or 5 years old.
Can you suggest anything or is my monitor faulty and needs replacing.
Many thanks. Rob

yep its dead for sure!
go get another one, or make it repair (i don't suggest it)
lg monitor are good, if you are going to buy....

Thanks for the reply tonakai, Guess I'm going to have to buy a new one.
Cheers Rob.