 |  |  |  |  |  |  |  |
Are FAT32/NTFS file systems handled by Mac OSX?
 |
Hi everybody,
I'm not sure yet but I may be interested into switching to Mac.
I was wondering what was the system file in OSX. The thing is I have a huge HD full of data in NTFS format and I would like to still have access to it if I migrate.
Also, if I buy a Mac now, it would run the OS 10.4. i've seen the tour on the Apple's website and the new version Tiger seems quite promising.
My questions would be:
- can my data on my NTFS drive be handled properly on OSX?
- what is the OS upgrade policy at Apple? When is the new 10.5 due to be released?
Thanks in advance
I'm not sure yet but I may be interested into switching to Mac.
I was wondering what was the system file in OSX. The thing is I have a huge HD full of data in NTFS format and I would like to still have access to it if I migrate.
Also, if I buy a Mac now, it would run the OS 10.4. i've seen the tour on the Apple's website and the new version Tiger seems quite promising.
My questions would be:
- can my data on my NTFS drive be handled properly on OSX?
- what is the OS upgrade policy at Apple? When is the new 10.5 due to be released?
Thanks in advance
Hello,
Check out this article: http://www.kernelthread.com/mac/osx/arch_fs.html
To summarize, OS X Default filesystem is HFS+ and you will want to use that for your main partitions. There are pieces of software out there that insist on being installed onto an HFS+ partition.
OS X will read NTFS. Won't write to it. Why? Most likely because of the security model... a Mac would need to be aware of the NT filesystem and permissions structure in order to effecitvely read and write to the disk. That is not easy to do, as how would a Mac predict both NT Workstation and Domain permissions when it is not "active"?
What I would do is get your mac, and then setup a small network to offload the data onto a different disk drive, or to CD-ROM / DVD Rom. Then again, if this is your only copy of the data, you do realize you are begging for hard disk failure and the collapse of it all.
To answer:
Mac OS X will read your NTFS Data.
Apple has in the past given reductions / free updates to those who purchase in within a certain timeframe of the next OS release. I would call a Mac store and ask them personally what the latest policy is.
Christian
Check out this article: http://www.kernelthread.com/mac/osx/arch_fs.html
To summarize, OS X Default filesystem is HFS+ and you will want to use that for your main partitions. There are pieces of software out there that insist on being installed onto an HFS+ partition.
OS X will read NTFS. Won't write to it. Why? Most likely because of the security model... a Mac would need to be aware of the NT filesystem and permissions structure in order to effecitvely read and write to the disk. That is not easy to do, as how would a Mac predict both NT Workstation and Domain permissions when it is not "active"?
What I would do is get your mac, and then setup a small network to offload the data onto a different disk drive, or to CD-ROM / DVD Rom. Then again, if this is your only copy of the data, you do realize you are begging for hard disk failure and the collapse of it all.
To answer:
Mac OS X will read your NTFS Data.
Apple has in the past given reductions / free updates to those who purchase in within a certain timeframe of the next OS release. I would call a Mac store and ask them personally what the latest policy is.
Christian
•
•
•
•
Originally Posted by Crazyfroggy
My questions would be:
- can my data on my NTFS drive be handled properly on OSX?
- what is the OS upgrade policy at Apple? When is the new 10.5 due to be released?
If you bought a Mac right now, it would come with 10.3, not 10.4. 10.4's release date hasn't been officially announced yet, but it's possible that if you bought your Mac after April 1st, that you'd get a voucher for a free upgrade to 10.4 (a.k.a, Tiger).
10.5 (Lion? Orange Tabby? Who knows..) is in the far, far, far future.. think early 2007 or something. I wouldn't sweat thinking about 10.5.
•
•
•
•
Originally Posted by yellow
As noted, OS X (10.3, a.k.a., Panther specifically) can read NTFS volumes. However, since 10.3.5, OS X has "limited" write capabilites to NTFS volumes. What does this mean? It means that it doesn't work very well, but we like to give people the idea that it sort of works... that it MIGHT work sometime. If you want to use your PC volume "seemlessly" with your Mac and a PC, the volume should be formatted with FAT32.
If you bought a Mac right now, it would come with 10.3, not 10.4. 10.4's release date hasn't been officially announced yet, but it's possible that if you bought your Mac after April 1st, that you'd get a voucher for a free upgrade to 10.4 (a.k.a, Tiger).
10.5 (Lion? Orange Tabby? Who knows..) is in the far, far, far future.. think early 2007 or something. I wouldn't sweat thinking about 10.5.
Also is there a limit eg 4gb on the size of A FILE WHICH CAN BE TRANSFERRED to a FAT32 partion.
Can A file on a mac fat 32 partion be transferrd and read by a NTFS format eg I am thinking a avi file for example
Is their a transfer limit from FAT32 to NTFS?
10.3/10.4 will READ an NTFS partition, but not right to it. The file limit size is based not on transfers, as far as I know, but on actual file sinze on the volume, so there's no files on FAT32 that will be larger then 4GB. Your best bet, if you have larger files to transfer, is to format the drive as HFS+ (which has no such limitations) and then get MacDrive for the PC, which will allow it to read HFS+ partitions.
put the drive in a firewire case...plug it into the mac and let it mount...then copy files from the drive to the mac until there is enough to fill a DVD or CD, then burn the data to disk...repeat until all the info you need off that drive is backed up...if you want to continue using that drive on the Mac full time, reformat it to HFS+, or set it up as a network share from a PC...I wouldn't use an NT formatted drive directly on a Mac with any regularity
•
•
Join Date: Jun 2005
Posts: 1,409
Reputation: 
Solved Threads: 43
I agree, its risky using an NTFS volume on a mac. A wrong write may destroy all data. Why? NTFS is a propriety file system, and MS has not released the details of NTFS. I'd suggest you put your NTFS HDD on a shared machine and copy the data to the mac. then, reformat as HFS+.....
Touch eyeballs to screen for cheap laser surgery
All very useful info.
An additional permuation.
I want to access an external hard drive from both tiger and winxp pro.
does that in any way complicate transferring files from a mac to winxp via the external hard drive.
Files will almost all be mp3, pdf, and avi ,but i may run a virtual machine XP on the mac so in that case I will need to transfer windows applications via the hard drive.
It seems that the best format may be to have the external hard drive in ntfs format. My back up file of winxp is 20gb and an NTFS can handle that whilst fat32 cannot.
Have I misinterpretted anything?
Thanks sincerely
An additional permuation.
I want to access an external hard drive from both tiger and winxp pro.
does that in any way complicate transferring files from a mac to winxp via the external hard drive.
Files will almost all be mp3, pdf, and avi ,but i may run a virtual machine XP on the mac so in that case I will need to transfer windows applications via the hard drive.
It seems that the best format may be to have the external hard drive in ntfs format. My back up file of winxp is 20gb and an NTFS can handle that whilst fat32 cannot.
Have I misinterpretted anything?
Thanks sincerely
As noted.. Mac OS X cannot write to NTFS, so if you want to write to the disk, it HAS to be either a FAT32 disk, or it has to be HFS+ and you'll have to install Mac Drive on your PC (so it can read/write to HFS+).
As for why NTFS cannot be written to by Mac OS X.. ask Microsoft. They never released the specs.
As for why NTFS cannot be written to by Mac OS X.. ask Microsoft. They never released the specs.
•
•
•
•
Originally Posted by yellow
As noted.. Mac OS X cannot write to NTFS, so if you want to write to the disk, it HAS to be either a FAT32 disk, or it has to be HFS+ and you'll have to install Mac Drive on your PC (so it can read/write to HFS+).
As for why NTFS cannot be written to by Mac OS X.. ask Microsoft. They never released the specs.
Ok I will go with Fat32. So can I transfer a 5gb file located on aNTFS system to a Fat32 system?
I will then want to transfer this to a Mac
|
Other Threads in the OS X Forum
- Previous Thread: How to defrag MAC OSX?
- Next Thread: Dell 926 on my iBook G4?
| Thread Tools | Search this Thread |
You need to join our community in order to build your list of favorite forums. You can visit the forum index for a listing of all forums.
Related Forum Features
Latest OS X Posts
- Today's Posts
- Unanswered Threads
