| | |
No display when turning on PC
Thread Solved |
Hello I wonder if anyone can Identify my problem.
I left my PC on for about 20 mins and when I came back there was a black screen with a few discoloured pixels left.
I rebooted and now nothing comes up at all. My computer starts up and there are no error beeps and sounds like it usually does except doesn't seem to load an OS(not enough Disk access). Tried to login blind and got not sound.
It's not the monitor or cable, i have checked it with my laptop.
I have tried reseating the RAM, no change. (When I removed all RAM I didn't get any beeps either don't know wheiter you should are not).
I have checked the motherboard for scorch marks and can't find any.
My PC has a graphics card and on board graphics tried both and no result.
Does anyone know what the problem is? Any help is appreciated.
System Spec:-
Motherboard: ASUS A8N-VM
CPU: AMD X2 3800+
RAM: 3GB
Graphics Card: NVidia 8600GT 1GB
I left my PC on for about 20 mins and when I came back there was a black screen with a few discoloured pixels left.
I rebooted and now nothing comes up at all. My computer starts up and there are no error beeps and sounds like it usually does except doesn't seem to load an OS(not enough Disk access). Tried to login blind and got not sound.
It's not the monitor or cable, i have checked it with my laptop.
I have tried reseating the RAM, no change. (When I removed all RAM I didn't get any beeps either don't know wheiter you should are not).
I have checked the motherboard for scorch marks and can't find any.
My PC has a graphics card and on board graphics tried both and no result.
Does anyone know what the problem is? Any help is appreciated.
System Spec:-
Motherboard: ASUS A8N-VM
CPU: AMD X2 3800+
RAM: 3GB
Graphics Card: NVidia 8600GT 1GB
I don't mind helping but please mark your thread as solved once the problem is sorted. If you figure it out tell us how you did it, don't just abandon your thread!
![]() |
Similar Threads
- HP laptop display turning black (Monitors, Displays and Video Cards)
- Reading char from stdin without waiting for input (C)
- After Adding RAM Monitor will not display, keeps turning off. (Monitors, Displays and Video Cards)
- Computer will not display red (Windows 95 / 98 / Me)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: blank screen, power on but wont boot
- Next Thread: Computer won't start after power outage.
| Thread Tools | Search this Thread |






