Toshiba Tecra 8200 wont boot after cmos fail

Reply

Join Date: Jun 2005
Posts: 1
Reputation: jonatbaylor is an unknown quantity at this point 
Solved Threads: 0
jonatbaylor jonatbaylor is offline Offline
Newbie Poster

Toshiba Tecra 8200 wont boot after cmos fail

 
0
  #1
Jun 18th, 2005
I have a toshiba tecra 8200 laptop. I started getting a warning during boot, a "cheksum error, cmos". it allowed me to boot into windows about 6 times and now it no longer boots.
ive replaced the RTC battery with the correct replacement. the first time I put the battery in and booted the machine, it listed a different error but i dont remember exactly what it was. it only allowed me to get that far once and since then, all i get is a green light in the front for about a second or two and nothing else. no hd spin, no cpu/ fan spin etc....

any suggestions? maybe my new rtc battery is bad? im thinkn of taking it to radio shack tomorrow to see if they can test it.

thanks for the help
Reply With Quote Quick reply to this message  
Join Date: Aug 2005
Posts: 2
Reputation: sf2k is an unknown quantity at this point 
Solved Threads: 1
sf2k sf2k is offline Offline
Newbie Poster

Re: Toshiba Tecra 8200 wont boot after cmos fail

 
0
  #2
Aug 23rd, 2005
ok

this may have no effect at all, but take out the battery and all the memory dimms and let sit for 5 minutes. Put it all back in, hit the reset plug in the front with a paperclip (gently) and reboot. Or various combinations of the above.

Although I didn't have a cmos issue I did have a problem of my tecra 8200 not getting to the POST at all. By removing everything and putting it all back in it worked and the machine is now fine. Actually I had forgotten that I did this while it was still plugged in and turned on :eek: but it actually made it better?? I won't recommend this last part, so was probably some kind of a reset issue!

cheers
sf2k
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Troubleshooting Dead Machines Forum


Views: 6102 | Replies: 1
Thread Tools Search this Thread



Tag cloud for Troubleshooting Dead Machines
About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC