Please support our Windows 9x / Me advertiser: 64-bit Windows Community
Views: 2372 | Replies: 4
![]() |
•
•
Join Date: Jul 2005
Posts: 4
Reputation:
Rep Power: 0
Solved Threads: 0
At the start up the computer says: windows could not start because the following file is missing or corrupt. \windows\wywtem32\config\system You can attempt to repair this file by starting windows setup using the original setup cd-rom select 'r' at the first screen to start repair I have tried to to select 'r' at the first screen but it does nothing.
•
•
Join Date: Jul 2005
Location: San Diego, CA
Posts: 14
Reputation:
Rep Power: 4
Solved Threads: 0
Occasionally, this message can be caused by faulty RAM. If you have more than one RAM module in your system, try using only one module at a time, alternating modules until you discover if one seems to be causing this problem. Otherwise, insert your Windows XP installation CD & reboot your system, making sure that the CD drive is higher priority in the boot order (check your BIOS by pressing F1/F2/F12/Esc/Del at system boot), and follow prompts to repair your Windows installation. If you don't have a Windows XP CD, perhaps because your copy of Windows was obtained with suspect methods, you can buy an upgrade version for cheaper than the full version at most retail stores.
-Matt
Quick PC Repair (serving the San Diego, CA area)
www.quickpcrepair.com
-Matt
Quick PC Repair (serving the San Diego, CA area)
www.quickpcrepair.com
![]() |
•
•
•
•
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)





Linear Mode