| | |
a8n premium board wont boot
![]() |
•
•
Join Date: Aug 2005
Posts: 2
Reputation:
Solved Threads: 0
i have an a8n sli premium board that wont boot. I was overclocking my memory when bios crashed while saving. after that pc wouldent boot. power was flowing as all fans ect started spinning, i can hear the harddrive going through post, its a sata hd
hardware is a8n sli premium
amd 4000 ath 64 939
pny 7800 gtx
corsair xms 512 x2 dual channel
500w ps witch seems to be running the machine fine
maxtor 80gb harddrive running sata and using a sata power connector
i tryed a "barebones" setup, i tryed reseting the bios with jumpers, i tryed the memory in another computer(works fine), i tryed holding the return button down at startup to reset the settings in bios(keyboard doesnt seem to have power flowing to it as none of the num lock, caps, scroll lights light up) I tryed these things in every order/combination possible and my computer still wont boot, screen shows no signal, the first 3 times i tryed to start my system after the bios save failure i heard an audio message saying that my ram timings were off or something it was hard to understand something about memory tho.
please help, and thanks
hardware is a8n sli premium
amd 4000 ath 64 939
pny 7800 gtx
corsair xms 512 x2 dual channel
500w ps witch seems to be running the machine fine
maxtor 80gb harddrive running sata and using a sata power connector
i tryed a "barebones" setup, i tryed reseting the bios with jumpers, i tryed the memory in another computer(works fine), i tryed holding the return button down at startup to reset the settings in bios(keyboard doesnt seem to have power flowing to it as none of the num lock, caps, scroll lights light up) I tryed these things in every order/combination possible and my computer still wont boot, screen shows no signal, the first 3 times i tryed to start my system after the bios save failure i heard an audio message saying that my ram timings were off or something it was hard to understand something about memory tho.
please help, and thanks
Red Led indicated two video card in system and did not connect Asus EZ plug. Use the same board said in page 2-1. Hopefully you didn't use stock heatsink/fan and use heatpipe or better heatsink fan, or water cooling, if you didn't your cpu is proably damaged. (Have a athlon X2 4800 use stock heatsink which had pipe on it was getting 48c with no load then change it to Zalman ZM-RST1 Water cooling getting 22c no load, and 34c full load. It definly worth it change to water cooling if planing on overclocking or gaming.) As for the cpu AMD have a 3yr warranty they will exchange it so long as no damage can be seen, had done this before with a AMD 64 3400, took them only two weeks.
![]() |
Similar Threads
- XP/board wont boot (Windows NT / 2000 / XP)
- Computer Wont Boot**** No Beeps (Troubleshooting Dead Machines)
- please help, pc wont boot (Motherboards, CPUs and RAM)
- PC Wont boot after memory setting change! (Motherboards, CPUs and RAM)
- Asus A8N sli deluxe wont boot (Troubleshooting Dead Machines)
- linux wont boot after Freeze (*nix Software)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: ...a strange Hardware Prob...
- Next Thread: Intermittant booting
| Thread Tools | Search this Thread |
appliances beep bioslosingharddrived bioslosingsettings black citrix cmosbattery compaq cpu dead delldimension4500 giving harddrive laptop linux mac neverbuyinspiron1525 nodisplay nopower operatingsystemnotfound osnotfound power ram redhat screen supply ubuntu virtualbox virtualization virtualmachines vmware xen






i guess its damaged but im still confused that if its damaged shouldent the red trouble led come on? could this mean my cpu is damaged?