Hello, glad to be here ! PC #1 hobby ..HELP !

Reply

Join Date: Oct 2005
Posts: 3
Reputation: lohanso is an unknown quantity at this point 
Solved Threads: 0
lohanso lohanso is offline Offline
Newbie Poster

Hello, glad to be here ! PC #1 hobby ..HELP !

 
0
  #1
Oct 26th, 2005
After replacing my old ECS MB with a new one (w/800fbs) I tried for a clean XP Pro install. I have to use the 6 pack installation disks as I don't have bootable CD.

All went well until I tried to run the setup disks. I can boot using a old ME disk and formated, ran fdisk, and STILL get this annoying error message when running the 1st setup disk, ...

"File \biosinfo.inf could not be loaded.
The error code is 4096.

Setup cannot continue. Press any key to exit"

ECS sent me e-mail recommending a bios flash, of course the Award falsh utility they have as a dl from their website doesn't run in DOS ....geeeze.

In the process of finding a DOS bois flashing utility now....anybody have and suggestions,r seen this issue before?

Steve
Reply With Quote Quick reply to this message  
Join Date: Aug 2005
Posts: 902
Reputation: chrisbliss18 is an unknown quantity at this point 
Solved Threads: 23
chrisbliss18's Avatar
chrisbliss18 chrisbliss18 is offline Offline
Posting Shark

Re: Hello, glad to be here ! PC #1 hobby ..HELP !

 
0
  #2
Oct 26th, 2005
It sounds like one of your disks went bad, not that your BIOS went bad.

Why is your Windows XP CD not bootable? In my experience, all non-upgrade WinXP CDs have been bootable.

To test to see if your system can boot up, this will ensure that your BIOS isn't corrupted, burn an Ultimate Boot CD. This is a utility CD that you can use to do various things. It will show if your system is bootable or not. Try it out and let us know if it loads.
Did we help you? Did we miss the point entirely? Update your thread and let us know.
Don't like the answers you are getting?
Did you try searching?
Clean up and optimize Windows 2000/XP
Reply With Quote Quick reply to this message  
Join Date: Oct 2005
Posts: 3
Reputation: lohanso is an unknown quantity at this point 
Solved Threads: 0
lohanso lohanso is offline Offline
Newbie Poster

Re: Hello, glad to be here ! PC #1 hobby ..HELP !

 
0
  #3
Oct 27th, 2005
the pc will boot, a ME boot disk will work, a XP Home floppy boot disk will work.

this XP pro came from work and is not a bootable CD.

I've created another 6 xp pro setupdisks, straight from the microsoft website and still get the saME "biosinfo.inf could not be loaded. Error code 4096"


Originally Posted by chrisbliss18
It sounds like one of your disks went bad, not that your BIOS went bad.

Why is your Windows XP CD not bootable? In my experience, all non-upgrade WinXP CDs have been bootable.

To test to see if your system can boot up, this will ensure that your BIOS isn't corrupted, burn an Ultimate Boot CD. This is a utility CD that you can use to do various things. It will show if your system is bootable or not. Try it out and let us know if it loads.
Reply With Quote Quick reply to this message  
Join Date: Aug 2005
Posts: 279
Reputation: J_Search is an unknown quantity at this point 
Solved Threads: 6
J_Search J_Search is offline Offline
Posting Whiz in Training

Re: Hello, glad to be here ! PC #1 hobby ..HELP !

 
0
  #4
Oct 27th, 2005
lohanso,

I hate to be Mr. Obvious here, but ME boots, XP Home boots, but XP Pro won’t boot. Therefore, you probably have a bad copy of the XP Pro install disks. You should make new disks (I don’t recommend actually using the same disks). Better yet, why can’t you just install XP Home and upgrade it to XP Pro using the CD from work?

J_
Reply With Quote Quick reply to this message  
Join Date: Oct 2005
Posts: 3
Reputation: lohanso is an unknown quantity at this point 
Solved Threads: 0
lohanso lohanso is offline Offline
Newbie Poster

Re: Hello, glad to be here ! PC #1 hobby ..HELP !

 
0
  #5
Nov 5th, 2005
CORRECT !!! I went to format the floppys as a last ditch effort to create a set up XP s and disk one would not format ! Picked up some new floppys and all went well THANKYOU !!

Originally Posted by chrisbliss18
It sounds like one of your disks went bad, not that your BIOS went bad.

Why is your Windows XP CD not bootable? In my experience, all non-upgrade WinXP CDs have been bootable.

To test to see if your system can boot up, this will ensure that your BIOS isn't corrupted, burn an Ultimate Boot CD. This is a utility CD that you can use to do various things. It will show if your system is bootable or not. Try it out and let us know if it loads.
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Windows NT / 2000 / XP Forum


Views: 2220 | Replies: 4
Thread Tools Search this Thread



Tag cloud for Windows NT / 2000 / XP
About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC