 |  |  |  |  |  |  |  |
For Dennis141: computer will not start just beeps
 |
•
•
•
•
Originally Posted by DMR
The sequence of the beeps is important; each particular beep sequence is a BIOS POST error code which points to a specific problem (bad ram, faulty drive, etc.).
We can tell you what the error code means if you can tell us the make and version of your BIOS, and descibe the beep code (for example: one long beep-two short beeps-one long beep).
Has there ever been a reply on this matter?
I happen to have experienced yesterday same problem as len11.
[Moderator's note: please reference this previous thread]
I have an IBM Netvista 6280/27U.
The pc was turned on and used almost normally, except for a BIOS error dialog box.
When the pc was shutdown and restarted later that day, it only gave on long beep, three short beeps.
I am a pc user and do not know to check the version of the BIOS.
I appreciate your help in this.
:!: Thanks.
Last edited by DMR; Nov 9th, 2005 at 5:08 pm.
•
•
•
•
Originally Posted by Dennis141
Has there ever been a reply on this matter?
I happen to have experienced yesterday same problem as len11.
I have an IBM Netvista 6280/27U.
The pc was turned on and used almost normally, except for a BIOS error dialog box.
When the pc was shutdown and restarted later that day, it only gave on long beep, three short beeps.
I am a pc user and do not know to check the version of the BIOS.
I appreciate your help in this.
:!: Thanks.
Remove everything but processor, memory, HDD and video card from your mobo.
Restart.
If this problem still persist replace memory first. Make sure you got right timings and other settings in BIOS
If compu still can't boot replace video card.
BTW, you can enter BIOS by pressing F1 at start of boot.
•
•
•
•
Originally Posted by pinto
One long and three sort beeps = Base 64 Kb memory failure.
Remove everything but processor, memory, HDD and video card from your mobo.
Restart.
If this problem still persist replace memory first. Make sure you got right timings and other settings in BIOS
If compu still can't boot replace video card.
BTW, you can enter BIOS by pressing F1 at start of boot.
The mobo has a built in video card, so same could not be removed.
Removal of the HDD connection and RAM did not help.
However, the code has now changed to - . . . - (one long, three short, one long beep)
Dennis141
I said:
Remove everything but processor, memory, HDD and video card from your mobo.
You cant boot into windoze without Hard Disc Drive and memory...
Replace memorystick(-s) with new ones.
Looks like you need some basic "read-up" and this site is a good start;
http://www.pcguide.com/
Remove everything but processor, memory, HDD and video card from your mobo.
You cant boot into windoze without Hard Disc Drive and memory...
Replace memorystick(-s) with new ones.
Looks like you need some basic "read-up" and this site is a good start;
http://www.pcguide.com/
|
Similar Threads
- Computer Won't Start! (Troubleshooting Dead Machines)
- Unable to access my computer, my documents, and control from start bar and run!! (Windows NT / 2000 / XP)
- Computer Won't Start up Please Help. (Cases, Fans and Power Supplies)
- computer takes long to start (Troubleshooting Dead Machines)
- Help my computer won't start (Windows NT / 2000 / XP)
- Computer bootup problem? (Windows NT / 2000 / XP)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: heat sink on benq laptop
- Next Thread: Inspiron 8000 won't post/boot
| Thread Tools | Search this Thread |
You need to join our community in order to build your list of favorite forums. You can visit the forum index for a listing of all forums.
Related Forum Features
Latest Troubleshooting Dead Machines Posts
- Today's Posts
- Unanswered Threads
appliances beep bioslosingharddrived bioslosingsettings black citrix cmosbattery compaq cpu dead delldimension4500 giving harddrive laptop linux mac neverbuyinspiron1525 nodisplay nopower operatingsystemnotfound osnotfound power ram redhat screen supply ubuntu virtualbox virtualization virtualmachines vmware xen
