 |  |  |  |  |  |  |  |
ip address setup
 |
Hello
in my w2k box Local Area Network which is setup for dhcp, I tried many times to change from: Obtain an IP address automatically to:
Use the following IP address and then used
IP address: 192.168.1.104
subnet mask:255.255.255.0
Default gateway: 192.168.100
but when I hit Ok, and then go back to see it, it defaults back to Obtain an IP address automatically.
why doesn't stay with the static address which I want?
thank you
in my w2k box Local Area Network which is setup for dhcp, I tried many times to change from: Obtain an IP address automatically to:
Use the following IP address and then used
IP address: 192.168.1.104
subnet mask:255.255.255.0
Default gateway: 192.168.100
but when I hit Ok, and then go back to see it, it defaults back to Obtain an IP address automatically.
why doesn't stay with the static address which I want?
thank you
•
•
Join Date: Jul 2004
Posts: 1,749
Reputation: 
Solved Threads: 54
Do you have a domain or workgroup ??
•
•
•
•
Determining how to select the IP address is pretty simple. Essentially, all you would need to do is give it any address outside of your DHCP scope. For example, let's say your DHCP scope was 192.168.0.50 - 192.168.0.100. This means that you have 50 IP address available to use with DHCP. So any address that falls between these two numbers (e.g., 192.168.0.72 or 192.168.0.90) will automatically be assigned to any client with DHCP enabled. Any of the IP addresses outside of this range can then be used as a static IP address.
•
•
•
•
Originally Posted by nanosani
Do you have a domain or workgroup ??
how can I find out what the dhcp range is, I did not set it up, it was done by my isp CD when they sent the adsl modem/router few weaks ago. now I am moving the internet access to another box "Linux" and want to change this w2k box to static ip.
when I look at the modem setup page using a browser, it says that the dhcp range is from 192.168.1.100 to ...149. well, is that set up in the PC or in the modem/router?
thanks
•
•
Join Date: Feb 2005
Posts: 675
Reputation:
Solved Threads: 17
Practically a Master Poster
It certainly sounds like the IP is conflicting with the DHCP range.
I would either choose an IP outside the range, like 192.168.1.200. (or anything else between 1-99, 150-255).
Also your Default Gateway is wrong, (should be the router IP, which by default is 192.168.1.1). This is more likely your problem.
If you want 192.168.1.104 especially, and after setting your router IP correctly in default gateway, you are still unable to do so, then you could add it to the exclusion range for the DHCP, which you should be able to do on the router setup menu, under DHCP.
Also you need to add, an IP address for the DNS server, from your ISP. This can be found on the FAQ of your ISPs website I would expect, under instructions for configuring ADSL Modem / Routers. [Your DNS IP could be found in your Router no doubt, under DHCP settings, as it has to be there for it to work in the first place]
Any problems, get back to us.
BTW, Welcome to Daniweb
I would either choose an IP outside the range, like 192.168.1.200. (or anything else between 1-99, 150-255).
Also your Default Gateway is wrong, (should be the router IP, which by default is 192.168.1.1). This is more likely your problem.
If you want 192.168.1.104 especially, and after setting your router IP correctly in default gateway, you are still unable to do so, then you could add it to the exclusion range for the DHCP, which you should be able to do on the router setup menu, under DHCP.
Also you need to add, an IP address for the DNS server, from your ISP. This can be found on the FAQ of your ISPs website I would expect, under instructions for configuring ADSL Modem / Routers. [Your DNS IP could be found in your Router no doubt, under DHCP settings, as it has to be there for it to work in the first place]
Any problems, get back to us.
BTW, Welcome to Daniweb
|
Similar Threads
- IP tracking? (Windows NT / 2000 / XP)
- To add TCP/IP in netware 5.1 running IPX protocol (Novell)
- Broadband wireless questions?? (Networking Hardware Configuration)
- How do you transfer files using crossover cable? (Windows NT / 2000 / XP)
- RedHat Network Server (*nix Hardware Configuration)
Other Threads in the Windows NT / 2000 / XP Forum
- Previous Thread: Toolbars not colored corectly
- Next Thread: I/O device error with CERTAIN cds
| Thread Tools | Search this Thread |
You need to join our community in order to build your list of favorite forums. You can visit the forum index for a listing of all forums.
Related Forum Features
Latest Windows NT / 2000 / XP Posts
- Today's Posts
- Unanswered Threads
.net 2007 2010 a.exe address alaris apache appstore arm auto automatically black blue book bulletin cellphones chkdsk collaboration computer computerfreezes crash cursor deployment desktop desktops dns dotnetnuke drive eartlink error errors explorer features folder fontmanagers format framework gadgets intel internet interoperability killprocess laptop linux load login mac memory microsoft mobile monitor motionle1600 netbooks novell nvidia open operatingsystems osx palm partition patch port printer product proxy remotedesktop remotedesktopconnection repair replacingraiddrive retrieve screen sharepoint simplifiedchinese sitetositevpn sp1 technology unreadable update usb verizon videodrivers videogames virtual virus vista visual vulnerability wab webos weecam win win32/heur window windows windows7 windowsxp windowsxpnotstartingup. worm xp xpde
